клеєнаносні станки б/у для продажу (577)

Чорні брати зверху і знизу клей розкидач-56inch робоча ємність- Топ-секція: гумовий покритий рулон (композитний канавок) і хром доктор рол Нижня секція: гумовий крейдований додаток рулон (композитний пазовій) і хром доктор рол З повним; натисніть кнопку магнітний стартер і охоронців 220 напруга

Serial Number: AH/114081 Power supply: 400 V – 3 phases – 50 Hz Weight: 820 kg Status: In working order Documentation: Record available Auction-ID: A1-44895-36

- Strip edge thickness from 0.40 mm to 12 mm. - Thickness of the edge in roll from 0.40 mm to 3 mm. - Thickness of the workpiece from 10 mm to 60 mm. - Variable feed rate. - IDM PC OFFICE control. - Entrance spindle moulder group. - Edge loader for slats and roll, edge tray for one roll. - Gluing unit with boiler for granulated hot melt adhesive, with prefuser. - Pressure group with (1+3) rollers. - Cross-cutting group. - Spoke profiling group. - Shape group with 2 motors. - Milling unit tiltable from 0° to 90°, 4 KW motor. - Radius scraper group. - Tail scraper group. - Group of cleaning brushes. - LEISTER hot air blower group. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-44536-59

- Total installed power 8.80 KW. - Edge thickness from 0.40 mm to 16 mm. - Thickness of the workpiece from 10 mm to 60 mm. - Minimum length of the piece 140 mm. - Minimum width of the piece 60 mm. - Adjustable feed speed from 10 m/min to 20 m/min. - 1.50 KW advance motor. - Control. - Edge loader for slats and roll, edge tray for one roll. - Gluing unit with tank for granulated hot melt adhesive. - Pressure group with (1+2) rollers. - Cross-cutting group, 2 x 0.50 KW-12000 rpm motor. - Spoke profiling group, 2 x motor at 12000 rpm. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-44536-6

- Edge thickness from 0.40 mm to 20 mm. - Thickness of the workpiece from 12 mm to 60 mm. - Minimum length of the piece 150 mm. - Minimum width of the piece 55 mm. - Adjustable feed speed from 18 m/min to 24 m/min. - HOMATIC NC 21 control. - Input spindle moulding group, 2 x 3 KW-9000 rpm motor. - Edge loader. - Gluing unit with boiler for granulated hot melt adhesive QUICK MELT A20. - Pressure group with (1+6) rollers. - HL 83 cross-cutting group, 2 x 0.40 KW-12000 rpm motor. - Straight roughing group, 2 x 1.50 KW-12000 rpm motor. - FK 13 shape group, 2 x 0.55 KW-12000 rpm motor with 8-position tool change each. - Radius scraper group. - FS 40 cleaning brush group, 2 x 0.25 KW-2800 rpm motor. - LIGMATECH ZHR 15/11/LI return system: year of manufacture 1997, serial number 0-305-09-2708. - Operating conditions of this machine: unchecked. - This item is delivered loaded b ...

- Semi-automatic machine for the application of rubber edges with a \"T\" section on panels of different shapes and dimensions without the aid of counter-templates. - Retractable cutting device. - Applicator with vibration so as not to damage the edge surface. - Heater to facilitate application operation. - Retestador. - Total installed power 6.02 KW. - Thickness of the pieces from 10 mm to 30 mm. - Feed speed 5 m/min. - Table dimensions 1050 x 800 mm. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-44536-52

• Edgebander • Serial number 10347 • Edge thickness in strips up to 12 mm • Edge thickness in roll up to 3 mm • Worpiece thickness up to 40 mm • Adjustable feed speed from 5 m/min up to 25 m/min • Feed motor 5,50 KW • Joint trimming unit, 2 x motor 3 KW • Edge feeder for strips and roll, edge magazine for 6 edge coils • Gluing unit for PUR glue • Pressure group with (1+5) rollers • End trimming unit, 2 x motor • Rough trimming unit, 2 x motor 1 KW • Profile trimming unit, 4 x motor • Profile scraping unit • Flat scraping unit • Edge buffing unit • Milling group • IMPORTANT: • The return system shown in the photographs is NOT included. • Operating conditions of this machine: unchecked. • This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A7-44536-60

- Total installed power 31 KW. - Edge thickness in rolls from 0.4 mm to 3 mm. - Edge thickness in rolls from 0.4 mm to 25 mm. - Thickness of the workpiece from 10 mm to 60 mm. - Variable feed speed from 10 m/min to 25 m/min. - PC Office control. - Input spindle moulding group, 2 x 4 Kw-12000 rpm motor. - Edge loader for 1 roll. - Gluing unit with boiler for granulated hot melt adhesive, with prefuser. - Pressure group with (1+6) rollers. - Cross-cutting group with 2 motors of 0.35 KW-12000 rpm. - Straight roughing group, 2 x 1.03 KW-12000 rpm motor. - Spoke profiling group, 2 x 0.55 KW-12000 rpm motor, tiltable up to 45°. - Spoke profiling group, 2 x 0.35 KW-12000 rpm motor, tiltable up to 45°. - Shape group with 4 motors of 0.35 KW-12000 rpm, with quick release of the motors. - Radius scraper group. - Tail scraper group. - Cleaning brush group, 2 x 0.30 KW-1500 rpm m ...

• Edgebander • Serial number 8667702 • Total installed power 22 KW • Edge thickness from 0,40 mm up to 3 mm • Worpiece thickness up to 50 mm • Minimum workpiece lenght 120 mm • Minimum workpiece width 120 mm • Feed motor 1,47 KW • Control • Edge magazine for one edge coil •  Gluing unit with pot for granulated hot melt adhesive • Pressure group with (1+3) rollers • End trimming unit, 1 x motor 0,37 KW-12000 rpm • Profile trimming unit, 4 x motor 0,37 KW-12000 rpm • Profile scraping unit • Edge buffing unit, 2 x motor 0,37 KW-1370 rpm • Operating conditions of this machine: unchecked. • This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A7-44536-190

• Edgebander, edge banding machine • Edge thickness from 0,40 mm up to 25 mm • Worpiece thickness from 6 mm up to 60 mm • Minimum workpiece lenght 140 mm • Minimum workpiece width 60 mm • Adjustable feed speed from 8 m/min up to 20 m/min • Feed motor 4,40 KW • HOLZ-HER 1961 joint trimming unit, 2 x motor 2 KW-12000 rpm • Edge feeder for 1 edge coil, edge magazine for 1 edge coil • HOLZ-HER 1907 cartridge glue system with pot for granulated hot melt adhesive • HOLZ-HER 1926 K pressure group with (1+2) rollers • HOLZ-HER 1819 snipping unit, 2 x motor 0,45 KW-12000 rpm • HOLZ-HER 1962 rough trimming unit, 2 x motor 2 KW-12000 rpm • HOLZ-HER 1934 lower profile trimming unit, 2 x motor 0,45 KW-12000 • HOLZ-HER 1933 upper profile trimming unit, 2 x motor 0,45 KW-12000 • HOLZ-HER 1927 profile scraping unit • HOLZ-HER 1964 flat scraping unit • HOLZ-HER 1944 ed ...

- Total installed power approx. 20 KW. - Thickness of the edge in strips from 0.60 mm to 25 mm. - Thickness of the edge in roll from 0.30 mm to 3 mm. - Thickness of the workpiece from 10 mm to 60 mm. - Minimum width of the piece 65 mm. - Adjustable feed speed from 8 m/min to 30 m/min. - 5.50 KW advance motor. - CNI PIC 200 control. - Input spindle moulder group, 2 x motors. - Edge loader for slats and roll, edge tray for one roll. - VC34 QMS gluing unit with tank for granulated hot melt adhesive, with prefuser. - Pressure group with (1+3) rollers. - Cross-cutting group, 2 x 0.33 KW-12000 rpm motor. - Straight roughing group, 2 x 1.03 KW-12000 rpm motor. - Spoke profiling unit, 2 x motor, tilting. - Shape group, 4 x 0.33 KW-12000 rpm motor. - Milling unit tiltable from 0° to 90°, motor from 2.20 KW-12000 rpm. - Radius scraper group. - Tail scraper group. - Cleaning br ...

• Edgebander • Serial number 8657401 • Total installed power approx, 31 KW • Edge thickness from 0,40 mm up to 8 mm • Worpiece thickness from 8 mm up to 40 mm • Minimum workpiece lenght 120 mm • Minimum workpiece width 120 mm • Feed speed 16 m/min • Feed motor 2,20 KW • Control • Joint trimming unit, 2 x motors • Edge feeder for strips and roll, edge magazine for one edge coil • Gluing unit with pot for granulated hot melt adhesive • Pressure group with (1+3) rollers • End trimming unit, 1 x motor 0,45 KW-12000 rpm • Rough trimming unit, 1 x upper motor 1,12 KW-12000 rpm • Profile trimming unit, 2 x upper motor 1,00 KW-12000 rpm, 2 x lower motor 0,30 KW-12000 rpm • Profile scraping unit • Edge buffing unit, 2 x motor 0,37 KW-1500 rpm • Milling group, motor 3 KW • Operating conditions of this machine: unchecked. • This item is delivered loaded  ...

- The surplus collection transfer is NOT included (marked in photo number 2). - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-44536-99

• Edgebander • Edge thickness from 0,40 mm up to 25 mm • Worpiece thickness from 6 mm up to 60 mm • Adjustable feed speed: 8 m/min - 20 m/min • Control • Joint trimming unit, 2 x motor 2 KW-12000 rpm • Edge feeder for strips and roll, edge magazine for one edge coil • HOLZ-HER 1906 cartridge glue system • Pressure group with (1+2) rollers • End trimming unit with 2 motors • HOLZ-HER 1823 fine trimming unit, 2 x motor 0,60 KW-12000 rpm • Profile scraping unit • HOLZ-HER 1983 profile trimming unit • Edge buffing unit • Milling group, motor 3,80 KW-12000 rpm • Sanding belt unit • Operating conditions of this machine: unchecked. • This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A7-44536-84

- Edge thickness from 0.40 mm to 2 mm. - Thickness of the part from 10 mm to 45 mm. - Minimum piece width 90 mm. - Feed speed 6 m/min. - Retestador group. - Spoke profiling unit. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-44536-21

• Edgebander • Serial number 14589/9-810 • Total installed power approx, 9 KW • Edge thickness from 0,40 mm up to 8 mm • Worpiece thickness from 6 mm up to 45 mm • Minimum workpiece lenght 180 mm • Minimum workpiece width 60 mm • Feed speed 11 m/min • Feed motor 0,75 KW • Control • HOLZ-HER 1902 edge feeder for roll, edge magazine for one edge coil • HOLZ-HER 1906 cartridge glue system • HOLZ-HER 1913 pressure group with (1+2) rollers • HOLZ-HER 1976K end trimming unit, 2 x motor 0,22 KW-9000 rpm • HOLZ-HER 1942M fine trimming unit, 2 x motor 0,60 KW-9000 rpm • Operating conditions of this machine: unchecked. • This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A7-44536-23

• Edgebander • Serial number 515/0-007 (2000) • Edge thickness in strips up to 13 mm • Edge thickness in roll from 0,40 mm up to 5 mm • Worpiece thickness from 6 mm up to 45 mm • Minimum workpiece lenght 180 mm • Minimum workpiece width 60 mm • Feed speed 11 m/min • Feed motor 1,50 KW • PLC control system • HOLZ-HER 1902 edge feeder for roll, edge magazine for one edge coil • HOLZ-HER 1906 cartridge glue system • HOLZ-HER 1912 pressure group with (1+1) rollers • HOLZ-HER 1918 end trimming unit, 2 x motor 0,22 KW-9000 rpm, tilting up to 10° • HOLZ-HER 1942 M fine trimming unit, 2 x motor 0,60 KW-18000 rpm, tilting up to 15° • HOLZ-HER 1929 profile scraping unit • HOLZ-HER 1940 edge buffing unit, 2 x motor 0,12 KW-1340 rpm • Operating conditions of this machine: unchecked. • This item is delivered loaded on truck. Dismantling and loading costs are s ...

Auction-ID: A3-43501-5689

Hot glue tub for edges application on both linear and shaped panels - Main motor 3.95 kW - Accidental burn protection - Height adjustable edge guide - Rubber pre-tape roller - Double flat scrapers on both sides of the panel - Edge header - Edge thickness 0.8 - 2 mm - Min/Max panel thickness 12/43 mm - Working speed: 7 m/min Machine condition: unchecked. Approx. Transport dimension: LxWxH 2000 x 670 x 1260 mm; Approx. Weight: 470kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-43155-393

Machine No. 0-200-24-7246, workpiece thickness max. approx. 60 mm, feed rate approx. 20 m/min, edge thickness roll approx. 0.4 - 3 mm, edge thickness strip approx. 0.4 - 20 mm, infeed ruler with automatic adjustment, joining milling unit motors 2 x 3 KW, edge magazine 1-fold, gluing unit A20 with QA application unit, pressure zone C with automatic adjustment, cross-cut saw unit HL81/84, pre-milling unit with motors 2 x 1.5 KW, Shape milling unit KF13 with motors 2 x approx. 0.4 KW and 8-fold tool changer each, universal milling unit UF motor approx. 4 KW controlled, profile and flat drawing blade, edge grinding unit KS, scraping, control NC21 (The article is in condition as existing and untested. The dismantling and loading costs are binding! The item is sold without content / material!) The machine has already been dismantled. No forklift available! The machine is handed over from the ...

Application: Edge banding of chipboard/MDF panelsElectrical supply: 400V 3F 50 HzUse: Furniture production line Auction-ID: A7-44526-3

: 0,4 - 3 mmWorkingpiece thickness from to: 8 - 60 mmFeed speed: 8 - 14, Vario m/min.Premilling unit: Ja : Ja : Ja Flush/radius/chamfer milling units: Ja Corner rounding unit: Ja : Ja Flat scraper: Ja Buffing unit: Ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0,4-3 / 8 mmWorkingpiece thickness from to: 8 - 50 mmTotal length: 5.360 mmFeed speed: 11 m/min.total power requirement: 7 kwWeight: ca. 2.500 kgPremilling unit: Ja : Ja Flush/radius/chamfer milling units: Ja Corner rounding unit: Ja : Ja Flat scraper: Ja Buffing unit: Ja Spraying device: Ja : Elektrisch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0,4-5 мм Товщина робочого елемента від до: 10-50 мм Загальна довжина — 2730 мм Швидкість подачі: м/хв Загальна потужність: кВт Вага: 720 кг Дані для цієї реклами були створені за допомогою ModulMWS — програмного рішення LogoTech oHG.

0: 0,4 - 3mm mmWorkingpiece thickness from to: 10-50 mmTotal length: , mmFeed speed: 9 m/min.Weight: ca. 1500 kgBI-MATIC edge banding machine type PRIMA 7.3 r.a. PLUS MAN Partnership Edition One-man operation, very little use, from business closure-------------------------------------------------------- -Technical manufacturers description:Units:Jointing unit including AIGNER diamond jointing cutter heads, withDIA Konstantin interchangeable cutter system and controlled edge blow-off nozzlebehind the 2nd jointing cutter head.Crosscut saw unit with extraction device including pneumatically swivellingsaw blades, adjustable and programmable from the control panel.Radius milling unitRounding unit (copying milling unit) with insertable base function and2-position turret. The entire unit can be inserted and removed pneumatically.Radius scraper unit can be inserted and removed, includin ...

Dimensions (L/W/H): 1720x760x1160 mmWeight: 230 kgTotal power requirement: 3,5 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1050x830x1100 mmWeight: 133 kgTotal power requirement: 2,1 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1480x760x1160 mmWeight: 180 kgTotal power requirement: 3,5 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 0x0x0 mmWeight: 0 kgTotal power requirement: 0,5 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 3810x575x1520 mmWeight: 1000 kgTotal power requirement: 8 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.