TUGRA machine à vendre

TUGRA ALU-KALTKREISSAEGE TYPE AC-450 - Zaagblad 450 mm - Dubbel verstek - 4 pinces pneumatiques - Nevelsmeerssysteem - 1 rouleau 300 cm - 1 rouleaux 300 cm met lengteaanslag - Blaaspistool - 2000 - Documentatie - 400V DUTCHMACH Machines à travailler les métaux ENSCHEDE - PAYS-BAS (3 km de la frontière allemande)

TUGRA ALU-KALTKREISSAEGE TYPE AC-420 - Zaagblad 420 mm - Dubbel verstek - 4 pinces pneumatiques - Nevelsmeerssysteem - 1 rouleau 300 cm - 1 rouleaux 300 cm met lengteaanslag - Blaaspistool - 2000 - Documentatie - 400V DUTCHMACH Machines à travailler les métaux ENSCHEDE - PAYS-BAS (3 km de la frontière allemande)

TUGRA ALU-KALTKREISSAEGE TYPE AC-400 - Zaagblad 400 mm - Dubbel verstek - 4 pinces pneumatiques - Nevelsmeerssysteem - 1 rouleau 300 cm - 1 rouleaux 300 cm met lengteaanslag - Blaaspistool - 2000 - Documentatie - 400V DUTCHMACH Machines à travailler les métaux ENSCHEDE - PAYS-BAS (3 km de la frontière allemande)

MACHINE DE FLEXION D’ANNEAU DE TUGRA TYPE PK 20 - Asdiameter 20 mm - Draait right-en leftom - Voetbediening - Noodstop - Documentatie - 400V DUTCHMACH Machines de métallurgie ENSCHEDE - PAYS-BAS (3 km de la frontière allemande)

MACHINE DE FLEXION D’ANNEAU DE TUGRA TYPE HPK 41 - Asdiameter 40 mm - Bovenste wals wordt hydraulique - uitlezing numérique - Horizontaal/verticaal te gebruiken - Voetbediening - Noodstop - Documentatie - 400V DUTCHMACH Machines de métallurgie ENSCHEDE - PAYS-BAS (3 km de la frontière allemande)

BROYEUR DE PIPE TUGRA TYPE TT 140 - Capaciteite 40-140 mm - Met 3rolls - 2 Snelheden - Horizontaal/verticaal - Hoekinstelling - Schuurbandafmetingen 150 x 2000 mm - Documentatie - 400V DUTCHMACH Machines de métallurgie ENSCHEDE - PAYS-BAS (3 km de la frontière allemande)

BROYEUR DE PIPE TUGRA TYPE TT 170 - Capaciteite 40-170 mm - Met 10 rouleau - Traploos snelheid réglable - Hoekinstelling - Documentatie - 400V DUTCHMACH Machines de métallurgie ENSCHEDE - PAYS-BAS (3 km de la frontière allemande)

TUGRA ALU-KALTKREISSAEGE TYPE AC-400 - Zaagblad 400 mm - Dubbel vertek - 2 pinces pneumatiques - Nevelsmeerssysteem - Materiaal tafel a rencontré lengteaanslag - Blaaspistool - Beschermkap - Documentatie - 400V PRIX IS plus MWsT DUTCHMACH Machines de métallurgie ENSCHEDE - PAYS-BAS (3 km de la frontière allemande)

TUGRA ALU-KALTKREISSAEGE TYPE AC-450 - Zaagblad 450 mm - Dubbel vertek - 2 pinces pneumatiques - Systeem Hydrocheck - Nevelsmeerssysteem - Roller baan a rencontré lengteaanslag - Blaaspistool - Beschermkap - Documentatie - 400V DUTCHMACH Machines de métallurgie ENSCHEDE - PAYS-BAS (3 km de la frontière allemande)

TUGRA ALU-KALTKREISSAEGE TYPE AC-550 - Zaagblad 550 mm - Dubbel vertek - 2 pinces pneumatiques - Systeem Hydrocheck - Nevelsmeerssysteem - Roller baan a rencontré lengteaanslag - Blaaspistool - Beschermkap - Documentatie - 400V PRIX IS plus MWsT DUTCHMACH Machines de métallurgie ENSCHEDE - PAYS-BAS (3 km de la frontière allemande)

TUGRA ALU-KALTKREISSAEGE TYPE DK-400 - Zaagblad 400 mm - Dubbel vertek - 4 pinces pneumatiques - Materiaal tafel a rencontré lengteaanslag - Blaaspistool - Beschermkap - Documentatie - 400V PRIX IS plus MWsT DUTCHMACH Machines de métallurgie ENSCHEDE - PAYS-BAS (3 km de la frontière allemande)

Description: Pipe grinding machine with 10 grinding rollers: 16.5 - 18.5 - 22.5 - 29.5 - 35 - 39.5 - 45.5 - 9.5 - 57.5 - 73.5 mm Pipe clamping area 90mm Bandwidth 100 mm Band length 1250 mm Pipe diameter 20 - 76 mm Angle adjustable from - to 30 - 90 degrees Connection voltage 400 V Total power requirement 2.2 kW Machine weight approx. 0.18 t Space requirement approx. 1.2 x 0.6 x 1.3 m weight approx.: 180 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 600 x 1,300 mm

Description: Pipe grinding machine with 10 grinding rollers: 16.5 - 18.5 - 22.5 - 29.5 - 35 - 39.5 - 45.5 - 9.5 - 57.5 - 73.5 mm Pipe clamping area 90mm Documentation (English) Bandwidth 100 mm Belt length 2000 mm Tube diameter 16.5 - 76 mm Angle adjustable from - to 0 - 65 degrees Connection voltage 400 V Total power requirement 2.2 kW Machine weight approx. 0.17 t Space requirement approx. 1.3 x 0.7 x 1.1 m weight approx.: 170 kg, Approx. Onsite Dimension. (l x w x h): 1,300 x 700 x 1,100 mm

width of the strips: 100 mm band length: 1250 mm band speed: m/sec tube diameter: 16,5 - 90 mm angle adjustable from - to: 0 - 65 Grad connected load frequency: 400 V total power requirement: 2,2 kW weight of the machine ca.: 0,18 t dimensions of the machine ca.: 1,2 x 0,6 x 1,3 m ipe grinding machine with 10 grinding rollers: 16.5 - 18.5 - 22.5 - 29.5 - 35 - 39.5 - 45.5 - 9.5 - 57.5 - 73.5 mm Pipe clamping area 90mm Documentation (English) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 100 mm band length: 2000 mm band speed: m/sec tube diameter: 16,5 - 76 mm angle adjustable from - to: 0 - 65 Grad connected load frequency: 400 V total power requirement: 2,2 kW weight of the machine ca.: 0,17 t dimensions of the machine ca.: 1,3 x 0,7 x 1,1 m ipe grinding machine with 10 grinding rollers: 16.5 - 18.5 - 22.5 - 29.5 - 35 - 39.5 - 45.5 - 9.5 - 57.5 - 73.5 mm Pipe clamping area 90mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 30 / 900 mm : 30 / 900 mm L-beam: 35X35X5 / 600 mm T - beam - web outwards: 50x6 / 600 mm Axis diameter: 40 mm work speed: 4,5 m/min roll diameter: 148 mm total power requirement: 1,1 kW weight of the machine ca.: 0,3 t dimensions of the machine ca.: 0,75 x 0,6 x 1,4 m Electric profile roller - Either horizontal or vertical working - 1 set of hardened standard rollers - lower 2 rollers are driven - 1 set of plastic rollers for diameter 33.7mm / 1 - Operation manual - Foot switch left / right and EMERGENCY STOP The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 500 x 32 x 4 mm turning speeds: 3580 U/min : 230 x 180 mm : 135 x 135 mm Capacity 45° rectangular: 165 x 180 mm : 115 x115 mm operating pressure: 6 - 8 bar voltage: 380 V total power requirement: 3,0 / 4,0 kW weight of the machine ca.: 220 kg dimensions of the machine ca.: 980 x 1130 x 1430 mm Standard Accessories Two hand safety operation Mitres up to 45° Right & Left 45°-30°-22.5°-15°-0° location points Intermediate angles via lock handle Easy access blade change Movable back-fence for larger cutting capacity Protective hood with safety switch Hydro pneumatic blade feed for smooth cutting (fully adjustable) Pneumatic twin vertical clamps Air dust gun included Roller support table included (2m) High quality blade included Spray mist blade lubricator (optional) Horizontal clamps (optional) Optional Equipment Hydro-check for cutting ...

tube diameter: 16 - 76 mm grinding band dimension: 100 x 2000 mm Band Speed: 30 m/min. voltage: 400 V angle adjustable from - to: 30 - 90 Grad power capacity - grinding motor: 2,2 kW range L-W-H: 1250 x 700 x 12500 mm weight: 170 kg Standard Accessories For tubes and profiles made of metal Simplified opera on by twistable grinding fixture Adequate for tube diameter from 1/ 2” to 2 1/ 2” Quick adjustment for grinding angle 30° – 90° Powerful motor 2,2 kW / 380 V Abrasive roll easy and fast changeable Because of tape speeds of 30m/s perfect fi ng for steel and material Vibration reduced stand The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 550 x 32 x 4 mm turning speeds: 3580 U/min : 260 x 200 mm : 155 x 155 mm Capacity 45° rectangular: 180 x 200 mm : 130 x 130 mm operating pressure: 6 - 8 bar voltage: 380 V total power requirement: 3 / 4 kW weight of the machine ca.: 220 kg dimensions of the machine ca.: 980 x 1130 x 1430 mm Standard Accessories Two hand safety operation Mitres up to 45° Right & Left 45°-30°-22.5°-15°-0° location points Intermediate angles via lock handle Easy access blade change Movable back-fence for larger cutting capacity Protective hood with safety switch Hydro pneumatic blade feed for smooth cutting (fully adjustable) Pneumatic twin vertical clamps Air dust gun included Roller support table included (2m) High quality blade included Spray mist blade lubricator (optional) Horizontal clamps (optional) Optional Equipment Hydro-check for cutting al ...

saw blade diameter: 400 x 32 x 4 mm turning speeds: 3400 U/min : 160 x 130 mm Capacity 45° rectangular: 125 x 125 mm voltage: 380 V operating pressure: 6 - 8 bar total power requirement: 1,5 / 2,0 kW weight of the machine ca.: 100 kg dimensions of the machine ca.: 710 x 810 x 1400 mm Standard Accessories Mitre left & right up to 45°, 30°, 22.5°, 15°, 0° location points Intermediate angles via manual lock Twin horizontal pneumatic clamps Pressure regulator for clamps On/Off switch for clamps Machine stand Air gun included Precision angle cutting Ideal for commercial aluminium and general profile cutting Standard conveyor (2 mt. right) Durable cast hub Optional Equipment Measuring conveyor in the desired size (3-6 m right) Assistant conveyor in desired sizes (3-6 m left) 1500 mm long, double-sized caliper bracket Pneumatic and automatic working system  ...

saw blade diameter: 400 x 32 x 4 mm turning speeds: 3580 U/min : 150 x 100 mm : 120 x 120 mm Capacity 45° rectangular: 130 x 80 mm : 100 x 100 mm operating pressure: 6 - 8 bar voltage: 380 V total power requirement: 1,5 / 2,0 kW weight of the machine ca.: 132 kg dimensions of the machine ca.: 720 x 760 x 1330 mm Standard Accessories Two hand safety operation Mitres up to 45° Right & Left 45°-30°-22.5°-15°-0° location points Intermediate angles via lock handle Easy access blade change Movable back-fence for larger cutting capacity Protective hood with safety switch Hydro pneumatic blade feed for smooth cutting (fully adjustable) Pneumatic twin vertical clamps Air dust gun included Roller support table included (2m) High quality blade included Spray mist blade lubricator (optional) Horizontal clamps (optional) Optional Equipment Hydro-check for cutting  ...

saw blade diameter: 450 x 32 x 4 mm turning speeds: 3000 U/min : 210 x 170 mm : 130 x 130 mm Capacity 45° rectangular: 145 x 170 mm : 100 x 100 mm operating pressure: 6 - 8 bar voltage: 380 V total power requirement: 2,2 / 3,0 kW weight of the machine ca.: 180 kg dimensions of the machine ca.: 850 x 970 x 1370 mm Standard Accessories Two hand safety operation Mitres up to 45° Right & Left 45°-30°-22.5°-15°-0° location points Intermediate angles via lock handle Easy access blade change Movable back-fence for larger cutting capacity Protective hood with safety switch Hydro pneumatic blade feed for smooth cutting (fully adjustable) Pneumatic twin vertical clamps Air dust gun included Roller support table included (2m) High quality blade included Spray mist blade lubricator (optional) Horizontal clamps (optional) Optional Equipment Hydro-check for cutting ...