TRONZADORAS machine à vendre

Type de machine : Scie en aluminium Fabricant : Tronzadoras Modèle : TL500A Année de construction : 2000 Condition : utilisé L’offre ne sera envoyée que si une empreinte complète est fournie ! Prix 1.750 Euro TVA 19% incluse Emplacement Warstein , Allemagne Référence M-TRO-1123 DESCRIPTION Nous vous proposons une scie à aluminium d’occasion du fabricant Tronzadoras. - Aut. Nourrir - Réglage de l’angle - Lubrification minimale D’autres photos suivront Disponibilité : immédiate Notre offre s’adresse aux commerçants qui sont inscrits au sens de la loi sur la réglementation du commerce conformément à l’article 14 du Code civil. L’offre est susceptible d’être modifiée, sous réserve d’une vente préalable. Veuillez fournir vos coordonnées complètes pour recevoir un devis avec nos conditions générales et nos con ...

Key data: 600 mm, 230 mm

Numéro de stock : 3831 SCIE À RACCOURCIR EN ALUMINIUM Fabricant : TRONZADORAS MG, Type : TL 600-90 N° de machine : 220309, Année de fabrication : 2022 Spécifications: Grande capacité de sciage 230 mm Ø Grande capacité de sciage 210 x 210 mm 4 ct. Grand diamètre de lame 600 mm Vitesses de lame 3000 tr/min Accessoires: Alimentation automatique. Poussoir Autopos 6 Pinon 6000 mm max. 40kg/m Aspiration de copeaux MG 570 4Kw Longueur : 1300 mm + 6700 mm, hauteur : 1660 mm, largeur : 813 mm, poids : 450 kg

saw blade diameter: 650 x 50 mm turning speeds: 3000 U/min : 230 x 230 mm : 400 x 100 mm capacity 90 degrees: round: 250 mm : 190 x 190 mm Capacity 45° rectangular: 260 x 100 mm : 230 mm cutting speed: 55 m/sec. work height max.: 970 mm total power requirement: 4,0 kW weight of the machine ca.: 450 kg dimensions of the machine ca.: 1400 x 820 x 1660 mm Description: Industrial aluminium sawing machine. The machines pneumatic control enables it to saw automatically, with the addition of standard horizontal pneumatic clamps. The sawing machine has an oil nebuliser for better sawing results. The saw feed is adjustable and the machine is supplied with a 500 x 50 mm saw blade. Accessories: - saw blade movement from below - saw blade with corbide teeth - adjustable sawing speed - length stop - lubrication system - air gun - saw blade included The data for this ad was created with ModulMWS -  ...

saw blade diameter: 350x 32 mm turning speeds: 3000 U/min : 115 x 115 mm : 160 x 90 mm capacity 90 degrees: round: 125 mm : 110 x 110 mm Capacity 45° rectangular: 75 x 45 mm : 120 mm Cutting height: 125 mm total power requirement: 1,5 kW weight of the machine ca.: 68 kg dimensions of the machine ca.: 780 x 480 x 850 mm Description: The TL-302-SA is a manual table saw (pneumatic span) with easy safe operation! With this machine, double miter cuts on the right and left are possible up to 45 °. The miter adjustment is done here by turning the stop jaw. The TL-302-SA has a compact design with clear operation. The saw cut is done manually from below into the material to be processed. The material is stretched over two pneumatic clamping cylinders. Furthermore, this model is equipped with a minimal lubrication system and a fixed protection against the cutting area. The data for this ad was ...

saw blade diameter: 600 x 50 mm turning speeds: 3000 U/min : 175 x 175 mm : 300 x 90 mm capacity 90 degrees: round: 220 mm work height max.: 970 mm Cutting height: max. 220 mm total power requirement: 4,1 kW weight of the machine ca.: 650 kg dimensions of the machine ca.: 2020 x 1510 x 975 mm Description: The ALU FRONT-450 is a double bevel machine with a swivel range of 45 ° left and 22.5 ° right and an automatic miter adjustment via stop functions. The saw stroke runs automatically and the material is pneumatically tensioned. The saw blade (450 x 30 mm) runs horizontally! Features: automatic mode Double miter right / left Saw stroke from bottom to top Carbide saw blade Saw speed adjustable length stop air pistol Minimal quantity cooling lubrication including sepia leaf The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 600 x 50 mm turning speeds: 3000 U/min : 175 x 175 mm : 300 x 90 mm capacity 90 degrees: round: 220 mm work height max.: 970 mm Cutting height: max. 200 mm cutting speed: 55 m/sec. Control: total power requirement: 4,1 kW weight of the machine ca.: 650 kg dimensions of the machine ca.: 2020 x 1510 x 975 mm Description: The ALU FRONT-450 is a double bevel machine with a swivel range of 45 ° left and 22.5 ° right and an automatic miter adjustment via stop functions. The saw stroke runs automatically and the material is pneumatically tensioned. The saw blade (450 x 30 mm) runs horizontally! Features: automatic mode Double miter right / left Saw stroke from bottom to top Carbide saw blade Saw speed adjustable length stop air pistol Minimal quantity cooling lubrication including sepia leaf The data for this ad was created with ModulMWS - the software solution of Logo ...

saw blade diameter: 800 x 50 mm turning speeds: 3000 U/min : 245 x 245 mm : 380 x 100 mm capacity 90 degrees: round: 280 mm : 210 x 210 mm Capacity 45° rectangular: 265 x 100 mm : 245 mm cutting speed: 55 m/sec. work height max.: 970 mm Cutting height: max 310 mm total power requirement: 4,0 kW weight of the machine ca.: 590 kg dimensions of the machine ca.: 1500 x 820 x 1700 mm Description: Industrial aluminium sawing machine. The machines pneumatic control enables it to saw automatically, with the addition of standard horizontal pneumatic clamps. The sawing machine has an oil nebuliser for better sawing results. The saw feed is adjustable and the machine is supplied with a 500 x 50 mm saw blade. Accessories: - saw blade movement from below - saw blade with corbide teeth - adjustable sawing speed - length stop - lubrication system - air gun - saw blade included The data for this ad w ...

saw blade diameter: 650 x 50 mm turning speeds: 3000 U/min : 230 x 230 mm : 400 x 100 mm capacity 90 degrees: round: 250 mm cutting speed: 55 m/sec. work height max.: 970 mm Cutting height: 250 mm : 80 db (A) total power requirement: 5,5 kW weight of the machine ca.: 450 kg dimensions of the machine ca.: 820 1300 x 1660 mm Description: Industrial aluminium sawing machine. The machines pneumatic control enables it to saw automatically, with the addition of standard horizontal pneumatic clamps. The sawing machine has an oil nebuliser for better sawing results. The saw feed is adjustable and the machine is supplied with a 500 x 50 mm saw blade. Accessories: - saw blade movement from below - saw blade with corbide teeth - adjustable sawing speed - length stop - lubrication system - air gun - saw blade included The data for this ad was created with ModulMWS - the software solution of LogoTe ...

saw blade diameter: 350 x 32 mm turning speeds: 3000 U/min : 100 x 100 mm : 170 x 60 mm capacity 90 degrees: round: 100 mm work height max.: 970 mm Cutting height: max. 100 mm Control: total power requirement: 1,9 kW weight of the machine ca.: 320 kg dimensions of the machine ca.: 1400 x 850x 970 mm Description: The ALU FRONT-450 is a double bevel machine with a swivel range of 45 ° left and 22.5 ° right and an automatic miter adjustment via stop functions. The saw stroke runs automatically and the material is pneumatically tensioned. The saw blade (450 x 30 mm) runs horizontally! Features: automatic mode Double miter right / left Saw stroke from bottom to top Carbide saw blade Saw speed adjustable length stop air pistol Minimal quantity cooling lubrication including sepia leaf The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 650 x 50 mm turning speeds: 3000 U/min : 230 x 230 mm : 400 x 100 mm capacity 90 degrees: round: 250 mm work height max.: 970 mm Cutting height: max. 250 mm cutting speed: 55 m/sec. total power requirement: 5,6 kW weight of the machine ca.: 720 kg dimensions of the machine ca.: 2020 x 1610 x 975 mm Description: The ALU FRONT-450 is a double bevel machine with a swivel range of 45 ° left and 22.5 ° right and an automatic miter adjustment via stop functions. The saw stroke runs automatically and the material is pneumatically tensioned. The saw blade (450 x 30 mm) runs horizontally! Features: automatic mode Double miter right / left Saw stroke from bottom to top Carbide saw blade Saw speed adjustable length stop air pistol Minimal quantity cooling lubrication including sepia leaf The data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ...

work piece width: 200 mm workpiece height: 100 mm bore diameter: 10 / 20 mm saw blade diameter: 350 x 32 mm turning speeds: 3000 U/min : 100 x 100 mm Capacity 90° rectangular: 170 x 60 mm capacity 90 degrees: round: 100 mm work height max.: 970 mm Cutting height: max. 100 mm total power requirement: 1,9 kW weight of the machine ca.: 260 t dimensions of the machine ca.: 1400 x 850x 970 m Description: The ALU FRONT-450 is a double bevel machine with a swivel range of 45 ° left and 22.5 ° right and an automatic miter adjustment via stop functions. The saw stroke runs automatically and the material is pneumatically tensioned. The saw blade (450 x 30 mm) runs horizontally! Features: automatic mode Double miter right / left Saw stroke from bottom to top Carbide saw blade Saw speed adjustable length stop air pistol Minimal quantity cooling lubrication including sepia leaf The data for thi ...

saw blade diameter: 650 x 50 mm turning speeds: 3000 U/min : 230 x 230 mm : 400 x 100 mm capacity 90 degrees: round: 250 mm work height max.: 970 mm Cutting height: max. 250 mm cutting speed: 55 m/sec. total power requirement: 5,6 kW weight of the machine ca.: 720 kg dimensions of the machine ca.: 2020 x 1610 x 975 mm Description: The ALU FRONT-450 is a double bevel machine with a swivel range of 45 ° left and 22.5 ° right and an automatic miter adjustment via stop functions. The saw stroke runs automatically and the material is pneumatically tensioned. The saw blade (450 x 30 mm) runs horizontally! Features: automatic mode Double miter right / left Saw stroke from bottom to top Carbide saw blade Saw speed adjustable length stop air pistol Minimal quantity cooling lubrication including sepia leaf The data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ...

saw blade diameter: 500 x 50 mm turning speeds: 3000 U/min : 150 x 150 mm : 250 x 75 mm capacity 90 degrees: round: 150 mm work height max.: 970 mm Cutting height: max. 150 mm feed: 700 mm Control: total power requirement: 3,0 kW weight of the machine ca.: 500 kg dimensions of the machine ca.: 2050 x 1150 x 990 mm Description: The ALU FRONT-450 is a double bevel machine with a swivel range of 45 ° left and 22.5 ° right and an automatic miter adjustment via stop functions. The saw stroke runs automatically and the material is pneumatically tensioned. The saw blade (450 x 30 mm) runs horizontally! Features: automatic mode Double miter right / left Saw stroke from bottom to top Carbide saw blade Saw speed adjustable length stop air pistol Minimal quantity cooling lubrication including sepia leaf The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 600 x 50 mm turning speeds: 3000 U/min : 210 x 210 mm : 350 x 110 mm capacity 90 degrees: round: 230 mm cutting speed: 55 m/sec. work height max.: 970 mm total power requirement: 4,0 kW weight of the machine ca.: 450 kg dimensions of the machine ca.: 820 x 1300 x 1660 mm Description: Industrial aluminium sawing machine. The machines pneumatic control enables it to saw automatically, with the addition of standard horizontal pneumatic clamps. The sawing machine has an oil nebuliser for better sawing results. The saw feed is adjustable and the machine is supplied with a 500 x 50 mm saw blade. Accessories: - saw blade movement from below - saw blade with corbide teeth - adjustable sawing speed - length stop - lubrication system - air gun - saw blade included The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 450 x 30 mm turning speeds: 2800 U/min : 130 x 130 mm : 200 x 100 mm capacity 90 degrees: round: 140 mm : 120 x 120 mm Capacity 45° rectangular: 150 x 100 mm : 140 mm cutting speed: 55 m/sec. work height max.: 970 mm Cutting height: max. 148 mm total power requirement: 2,2 kW weight of the machine ca.: 450 kg dimensions of the machine ca.: 1400 x 1000 x 1800 mm Description: The ALU FRONT-450 is a double bevel machine with a swivel range of 45 ° left and 22.5 ° right and an automatic miter adjustment via stop functions. The saw stroke runs automatically and the material is pneumatically tensioned. The saw blade (450 x 30 mm) runs horizontally! Features: automatic mode Double miter right / left Saw stroke from bottom to top Carbide saw blade Saw speed adjustable length stop air pistol Minimal quantity cooling lubrication including sepia leaf The data for this ad w ...

saw blade diameter: 350 x 32 mm turning speeds: 3000 U/min : 100 x 100 mm : 170 x 60 mm capacity 90 degrees: round: 100 mm work height max.: 970 mm Cutting height: max. 100 mm total power requirement: 1,9 kW weight of the machine ca.: 260 kg dimensions of the machine ca.: 1400 x 850x 970 mm Description: The ALU FRONT-450 is a double bevel machine with a swivel range of 45 ° left and 22.5 ° right and an automatic miter adjustment via stop functions. The saw stroke runs automatically and the material is pneumatically tensioned. The saw blade (450 x 30 mm) runs horizontally! Features: automatic mode Double miter right / left Saw stroke from bottom to top Carbide saw blade Saw speed adjustable length stop air pistol Minimal quantity cooling lubrication including sepia leaf The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 500 x 50 mm turning speeds: 3000 U/min : 150 x 150 mm : 250 x 75 mm capacity 90 degrees: round: 150 mm work height max.: 970 mm Cutting height: max. 150 mm total power requirement: 3,0 kW weight of the machine ca.: 450 kg dimensions of the machine ca.: 1950 x 1050 x 970 mm Description: The ALU FRONT-450 is a double bevel machine with a swivel range of 45 ° left and 22.5 ° right and an automatic miter adjustment via stop functions. The saw stroke runs automatically and the material is pneumatically tensioned. The saw blade (450 x 30 mm) runs horizontally! Features: automatic mode Double miter right / left Saw stroke from bottom to top Carbide saw blade Saw speed adjustable length stop air pistol Minimal quantity cooling lubrication including sepia leaf The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 350 x 32 mm turning speeds: 3000 U/min : 110 / mass. 95 mm : 175 x 75 mm capacity 90 degrees: round: 125 mm : 85 / mass. 80 mm Capacity 45° rectangular: 100 x 80 mm : 105 / mass 90 mm total power requirement: 1,5 kW weight of the machine ca.: 180 kg dimensions of the machine ca.: 1200 x 1100 x 1500 mm Industrial aluminium sawing machine. The machines pneumatic control enables it to saw automatically. Work pieces are clamped pneumatically. The sawing machine has an oil nebuliser for better sawing results. With adjustable sawing feed. Accessories: saw blade comes up from below hard metal saw blade sawing speed adjustable length stop air gun lubrication system including saw blade 13.15.1015 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 600 x 50 mm turning speeds: 3000 U/min : 200 x 200 mm : 500 x 50 mm capacity 90 degrees: round: 230 mm : 160 x 160 mm Capacity 45° rectangular: 250 x 100 mm : 230 mm total power requirement: 4,1 kW weight of the machine ca.: 500 kg dimensions of the machine ca.: 1300 x 1220 x 1635 mm Description: Industrial aluminium sawing machine. The machines pneumatic control enables it to saw automatically, with the addition of standard horizontal pneumatic clamps. The sawing machine has an oil nebuliser for better sawing results. The saw feed is adjustable and the machine is supplied with a 500 x 50 mm saw blade. Accessories: - saw blade movement from below - saw blade with corbide teeth - adjustable sawing speed - length stop - lubrication system - air gun - saw blade included The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 500 x 50 mm turning speeds: 3000 U/min : 150 x 150 mass. 95 mm : 300 x 125 mm capacity 90 degrees: round: 180 mass. 95 mm : 120 x 120 / mass. 85 mm Capacity 45° rectangular: 145 x 120 mm : 150 / mass 100 mm total power requirement: 3,0 kW weight of the machine ca.: 430 kg dimensions of the machine ca.: 1200 x 1100 x 1500 mm Description: Industrial aluminium sawing machine. The machines pneumatic control enables it to saw automatically, with the addition of standard horizontal pneumatic clamps. The sawing machine has an oil nebuliser for better sawing results. The saw feed is adjustable and the machine is supplied with a 500 x 50 mm saw blade. Accessories: - saw blade movement from below - saw blade with corbide teeth - adjustable sawing speed - length stop - lubrication system - air gun - saw blade included The data for this ad was created with ModulMWS - the softw ...

saw blade diameter: 350 x 32 mm turning speeds: 3000 U/min : 115 x 115 mm : 160 x 90 mm capacity 90 degrees: round: 125 mm : 110 x 110 mm Capacity 45° rectangular: 175 x 45 mm : 125 mm total power requirement: 1,5 kW weight of the machine ca.: 68 kg dimensions of the machine ca.: 780 x 480 x 850 mm Description: The TL-350-M is a manual circular saw with easy safe operation! With this machine double miter cuts on the right and left up to 45 ° are possible. The miter adjustment is done here by turning the stop jaw. The TL-350-M has a compact design with clear operation. The saw cut is done manually from below into the material to be processed. The material is tensioned manually. Fixed protection from the cutting area. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 300 x 32 mm turning speeds: 3000 U/min : 85 x 85 mm : 120 x 50 mm capacity 90 degrees: round: 100 mass, 75 mm : 60 x 60 mm Capacity 45° rectangular: 75 x 75 mm : 80 mass. 85 mm Cutting height: 100 mm total power requirement: 1,5 kW weight of the machine ca.: 60 kg dimensions of the machine ca.: 700 x 500 x 900 mm Description: The TL-302-SA is a manual table saw (pneumatic span) with easy safe operation! With this machine, double miter cuts on the right and left are possible up to 45 °. The miter adjustment is done here by turning the stop jaw. The TL-302-SA has a compact design with clear operation. The saw cut is done manually from below into the material to be processed. The material is stretched over two pneumatic clamping cylinders. Furthermore, this model is equipped with a minimal lubrication system and a fixed protection against the cutting area. The data f ...

saw blade diameter: 300 x 32 mm turning speeds: 3000 U/min : 85 x 85 mm : 120 x 50 mm capacity 90 degrees: round: 100 mm : 60 x 60 mm Capacity 45° rectangular: 75 x 75 mm : 80 mm total power requirement: 1,5 kW weight of the machine ca.: 60 kg dimensions of the machine ca.: 700 x 500 x 900 mm Description: The TL-350-M is a manual circular saw with easy safe operation! With this machine double miter cuts on the right and left up to 45 ° are possible. The miter adjustment is done here by turning the stop jaw. The TL-350-M has a compact design with clear operation. The saw cut is done manually from below into the material to be processed. The material is tensioned manually. Fixed protection from the cutting area. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 700 x 50 mm turning speeds: 3000 U/min : 250 x 250 mm : 400 x 140 mm capacity 90 degrees: round: 275 mm cutting speed: 55 m/sec. work height max.: 970 mm total power requirement: 5,5 kW weight of the machine ca.: 550 kg dimensions of the machine ca.: 820 x 1400 x 1660 mm Description: Industrial aluminium sawing machine. The machines pneumatic control enables it to saw automatically, with the addition of standard horizontal pneumatic clamps. The sawing machine has an oil nebuliser for better sawing results. The saw feed is adjustable and the machine is supplied with a 500 x 50 mm saw blade. Accessories: - saw blade movement from below - saw blade with corbide teeth - adjustable sawing speed - length stop - lubrication system - air gun - saw blade included The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 400 x 50 mm turning speeds: 3000 U/min : 100 x 110 mm : 250 x 85 mm capacity 90 degrees: round: 130 mm : 110 x 110 mm Capacity 45° rectangular: 160 x 70 mm : 115 / mass. 90 mm work height max.: 970 mm total power requirement: 1,5 kW weight of the machine ca.: 380 kg dimensions of the machine ca.: 900 x 1000 x 1480 mm Basic equipment: ? Double miter 30 ° - 90 ° - 0 °, large support plate, powerful drive motor ? Two-button control to trigger the saw cut (optionally also available as a one-button control) ? Clear control panel ? Two vertical and two horizontal pneumatic clamping cylinders ? Fixed material feed jaw can be moved backwards to increase the cutting performance ? Large protective hood, covers the entire work area ? Minimal lubrication system ? Sheet or cut feed adjustable ? Saw blade ø 400 mm ? Air gun to clean the machine The data for this ad w ...