Модель
(Виробник: TRAUB)
Article: Programme-controlled automatic lathe Manufacturer: Traub Type: TF60 / 140 Yob: 1978 Bar automat Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
turning diameter:275 mm turning length:900 mm spindle passage:65 mm power capacity at 100 % load:25/20 kW spindle turning speed range:1 - 5000 U/min spindle diameter in front bearing:110 mm c-axis:1 - 500 U/min. number of workpiece supports:4 tool turret:1 x-axis:290 mm y-axis:165 mm z-axis:360 mm b-axis:360 ° rapid speed:18/30 m/min number of tools:2x2 + 2x2 number of driven tools:2x2 + 2x2 mm toolpiece turning speed range:8000 / 2000 U/min power capacity:25% ED 5,8 kW tool taper:TRAUB 60 tool turret:2/3/4 x-axis:170 mm z-axis:600/950 mm y-axis:+/- 60 mm rapid speed:18/15/30 m/min number of driven tools:10 mm toolpiece turning speed range:1 - 6000 U/min power capacity:25% ED 5,8 kW tool taper:DIN 69880 40 x 63 total power requirement:95 kW weight of the machine ca.:16 t dimensions of the machine ca.:10,0 x 3,5 x 3,0 m with CNC TRAUB TX 8i, Barloader TRAUB Stamag DNH61 / 3000, Main and ...
turning diameter:500 mm turning length:1000 mm weight of the machine ca.:7,3 t dimensions of the machine ca.:6,5 x 4,45 x 2,21 m
turning diameter:480 mm turning length:800 mm total power requirement:30 kW turning diameter over bed slide:240 spindle bore:65 mm disc turret:12 fach rapid travel range:20 / 10 m/min weight of the machine ca.:4,5 t dimensions of the machine ca.:4 x 2,2 x 2,1 m with CNC TRAUB TX 8 H C-axis driven tooling, 6 positions 3,5 kW / 4000 rpm power chuck coolant attachment, chip conveyor diverse toolholders
spindle passage: 65 mm Max. Turning length: 450 mm Spindle diameter in forward position: 110 mm control: System TX8 I number of spindle speeds: 4.000 U/min CNC lathe | TNC 42/65 - 2007 equipped with bar loader. The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: TNC65 | TNC-65 |TNC 42-65 | TNC 42/65 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 65 mm turning length: 650 mm control: TX8i-s Main Spindle:: spindle passage: 65 mm spindle turning speed - stepless: 5000 U/min drive capacity - spindle motor: 24 / 17 kW spindle bearing diameter: 110 mm Torque: 192 Nm x-travel: 175 mm z-travel: 650 mm y-travel: 80 (+/- 40) mm 2nd Spindle:: spindle passage: 65 mm spindle turning speed - stepless: 5000 U/min drive capacity - spindle motor: 24 / 17 kW spindle bearing diameter: 110 mm Torque: 192 Nm total power requirement: 85 kW weight of the machine ca.: 10 t dimensions of the machine ca.: 3.420 x 3300 x 2.258 m Main spindle: fully reconditioned in 2026 - TRAUB TX8i-s CNC control - Main and counter spindles -- 2 x Hainbuch Kombi Axfix 65 -- C-axis 0.001° - 3 tool turrets (10-position, VDI 30) -- Turret: 10-position with driven tools, 6,000 rpm, 5.5/3.7 kW - Coolant mist extraction and separation system - In-machine op ...
turning diameter: 275 mm turning length: 900 mm control: TRAUB TX8i-s spindle passage: 65 mm spindle turning speed - stepless: 1 - 5.000 U/min spindle diameter in front bearing: 110 mm C-axis: 1 - 500 U/min x-axis: 175 mm z-axis: 650/975 mm y-axis: +/- 40 mm rapid traverse X/Y/Z: 20 / 40 / 20 m/min feed capacity X/Y/Z: 5,5 / 5,5 / 10 kN tool turret - number of stations: 10 number of driven tools: 10 mm toolpiece turning speed range: 1 - 6.000 U/min power capacity at 25 % load: 5,50 kW max. torque at 25% load: 17,50 Nm tool taper DIN 69880: Ø30x55 spindle diameter in front bearing: 110 mm total power requirement: 95,00 kW weight of the machine ca.: 16,00 t dimensions of the machine ca.: 10,00 x 3,50 x H3,00 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: mm turning length: mm control: 0 total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bar material dia.: max. 85 mm bar length: 3000 / 3500 mm No. 0703 1 used bar feeder TRAUB 3D / E85 / 3000 Z Bar diameter : max. 85 mm Bar length: max. 3000 mm UNPROOFED / As Spare Part The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 480 mm turning length: 800 mm control: System TX8F turning diameter over slide: 240 mm spindle passage: 65 mm chuck diameter: 200 mm turning speeds: 4000 U/min power capacity: 30 kW total power requirement: kW weight of the machine ca.: 4,3 t dimensions of the machine ca.: m powered tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 12,7 mm turning length: 50 mm control: Traub System TX 8i turning speeds: 12000 U/min c-axis: 0,001° gripping station: 12,7 mm c-axis: 0,001 ° speeds: 12000 U/min rapid traverse: 15 m/min turret (x-stations): 6 worktool system: 5+3 worktool system: 3 Werkzeugsysteme total power requirement: 2,5/4 kW weight of the machine ca.: 2 t dimensions of the machine ca.: 2,4 x 1,1 x 1,7 m driven tools: 6+4+4 Rev+S7+S8 CNC turning machine Traub TNL 12K with barloader LNS Tryton 112 Motor drive S8 (rear working with driven tools possible) Motor drive S7 (front working with driven tools possible) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 250 mm turning length: 450 mm control: TX8D bore: 80 mm spindle speed:: 3150 U/min. CNC Lathe with Bar Feed and 3 Turrets Very large spindle bore, with bar loading device Please ask for further details. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Manufacturer: Traub Year of Manufacture: 2002, factory overhaul completed 2018 Model: TNK 36 Type of Machine: CNC automatic lathe Operating Hours: approximately 147,007 hours, as of June 2026 CONTROL SYSTEM - Control: TX8i (64 bit), 14 inch flat screen - Additional V24 RS232 interface in the control cabinet - MDE interface in control cabinet, machine running and piece counter - Thread cutting without compensating chuck - Polyform function for C-axis - Tool monitoring MAIN SPINDLE - Spindle bore: 36 mm - Maximum speed: 6,300 rpm - Drive power: AC 6.7 / 10.7 kW - C-axis - Change parts: Hainbuch - Mounting aid base body - Manual Hainbuch change device COUNTER SPINDLE - Counter spindle as motor spindle - Spindle bore: 32 mm - Maximum speed: 6,300 rpm - Travel Z4: 250 mm - Rapid traverse Z4: 30 m/min - C-axis - Device for counter clamping pressure - Workpiece ejector device - Increa ...
Manufacturer: Traub Model: TNK 36 Year of Manufacture: 2003 Operating Hours: approx. 124,705 h (as of May 2026) Total Connected Power: 33 kW Voltage: 400 V / 50 Hz Condition: No known defects. Available for live demonstration. CNC Control - Control: TX8i (64-bit) - Screen: 10.4 inch flat panel display - Interface: V24 RS232 in control cabinet - MDE Interface: Machine running / piece counter - Tool monitoring included - Thread cutting without compensation chuck - Programming: At machine control or via WinFlex IPS software on PC Main Spindle - Spindle Bar Capacity: 36 mm - Max. Speed: 6,300 rpm - Drive Power: AC 6.7 / 10.7 kW - C-axis included - Hainbuch collet chuck system (manual change device included) Counter Spindle - Motor spindle with C-axis - Counter-clamping pressure device - Workpiece ejector - Hainbuch Axfix collet chuck - Upper tool carrier with driven tools and ele ...
Шпиндельний прохід: максимум 80 мм. діаметр повороту: 395 ммМакс. Довжина повороту: 750 мм, керування: System TX 8H максимум. Швидкість шпинделя: 3,150 U/хв. Токарний верстат з ЧПУ | TRAUB - TNA 400Машина перебуває в хорошому стані. - - - - - - #Tags:TNA400 | TNA-400Дані для цієї реклами були створені за допомогою ModulMWS — програмного рішення LogoTech oHG.
spindle passage: 80 mm max. turning diameter: 460 mm Max. Turning length: 1.000 mm control: System TX 8F max. Spindle speed: 2.800 U/min. CNC lathe | TRAUB - TNA 500 The machine is in a well-maintained condition. The machine videos from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags:TNA500 | TNA-500 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 275 mm turning length: 900 mm control: TRAUB TX8i Main- opposite spindle: spindle passage: 65 mm power capacity at 100 % load: 25,20 kW power capacity at 40 % load: 30,20 KW max. torque at 40% / 100% load: 180 / 135 Nm spindle turning speed - stepless: 1 - 5.000 U/min spindle diameter in front bearing: 110 mm C-axis: 1 - 500 U/min worktool support: No. 1 x-axis: 290 mm y-axis: 165 mm z-axis: 600/950 mm B - axis: 360 ° rapid traverse X/Y/Z: 18 / 18 / 30 m/min feed capacity X/Y/Z: 10 / 10 / 7 kN number of tools: 2x2 + 2x2 number of driven tools: 2x2 + 2x2 mm toolpiece turning speed range: 8.000 / 2.000 U/min power capacity at 25 % load: 5,80 kW max. torque at 25% load: 4x18,6 / 4x74 Nm tool taper: TRAUB Ø60 worktool support: No.2 / No.3 / No.4 x-axis: 170 mm z-axis: 600/950 mm y-axis: +/- 60 mm rapid traverse X/Y/Z: 18 / 15 / 30 m/min feed capacity X/Y/Z: 10 / 10 / 7 k ...
Продаж токарного верстата Traub TNL 12 K Рік побудови 2005 Вивезення та навантаження на автотранспорт за рахунок покупця Доставка з заводу без страхування транспорту Дізнайтеся більше тут - / Зв'яжіться з нами за адресою -
Траулерна система керування ЧПУ TX 8D Інструменти осі C/ Керовані Годівниця для смужок Stamag DN42 Колектор готових деталей Чіп-конвеєр Внутрішнє рідина охолодження Дуже хороший стан Максимальний діаметр планки 42 мм Довжина повороту 220 мм Гідравлічний патрон Чак- макс. поворот діаметром 140 мм Максимальний діаметр повороту 140 мм Максимальний діаметр повороту над ліжком 390 мм Шпиндель нудний 42 мм Кількість голівок башти - 3 -1 башта 12 інструментів -2 башта 12 інструментів -3 башта 4 інструме ...
TRAUB TNL 18P ist eine CNC Langdrehautomat, gebaut für Präzision, hohe Genauigkeit und Zuverlässigkeit. Kapazitäten: Drehlänge 180 mm, Stangendurchmesser max. 20 mm; FMB minimag 20 Lademagazin für 2–23 mm bis 4200 mm. Hauptdaten: 7 Achsen, 2 Spindeln; Längsweg Z 205 mm (Z-Achse 250 mm), X 120 mm, Y -20/+40 mm; Hauptspindel bis 8000 min-1, Gegenspindel bis 6400 min-1; Spindelleistungen 2.2/3.7 kW und 1.5/2.5 kW; Gesamtbedarf 24 kVA; Gewicht ~4000 kg; Abmessungen 2500×1460×2250 mm. Zubehör: Hochdruck-Kühlmittel 30 bar, Wasserkühler, Papierfiltration, Reduzierhülsen, Führungsbuchse, Fräsapparat, Werkzeugvoreinstellung, Lampe, Löschsystem. Ermöglicht enge Toleranzen; geeignet für Automotive, Uhrenindustrie, Werkzeugbau, Luftfahrt und Medizintechnik. Technische Daten ohne Gewähr
TRAUB A 15 ist ein Drehautomat, ausgelegt für Präzision, hohe Genauigkeit und Zuverlässigkeit in Serienfertigung. Arbeitsvermögen: Werkstück-Ø max 15 mm, Drehlänge 70 mm, Spindelbohrung 15 mm, größter Gewindedurchmesser 8 M, Kapazität 28–2100 p/h. Technische Daten: 12 Drehzahlen von 900–6500 t/min; Anschluss 50 Hz 3x380 V; Leistung 1,5 CV; Gewicht ca. 650 kg; Maße L1200×B800×H1500 mm. Zubehör: Stangenlademagazin TRAUB B3000 (max 3200 mm), Transportapparat, Greifereinrichtung, Senkrechtsupport, Schlitzapparat, Bohrreitstock, Werkstückzähler, Schutzhaube. Erreicht enge Toleranzen; geeignet für Automotive, Uhrentechnik, Werkzeugmaschinenbau, Luftfahrt und Medizintechnik Technische Daten ohne Gewähr
Виробник: TRAUB Модель: TNX 65/42 Рік: 2008 Стан: Використаний Номер складу: 9485 Система керування: Traub TX 8i-s Максимальна довжина ходу по осі X: 175 мм Максимальна довжина ходу по осі Y: 40 мм Максимальна подача по осі Z: 650 мм Кількість шпинделів: 2 частини Максимальна потужність головного шпинделя: 24 кВт Максимальна швидкість шпинделя: 5000 1/хв Максимальний діаметр стрижня: 65 мм Діаметр патрона токарного верстата: 175 мм Довжина: 5500 мм Ширина: 2700 мм Висота: 2300 мм Вага: 10000 кг Головне шпиндель було відре ...
Інв. Номер: 8535 Тип: TNL 18P Виробник: TRAUB Рік створення: 2013 Параметри: Система управління: TRAUB SYSTEM TX 8i-p діаметр стрижня: 20 мм Максимальна довжина обточування: 180 мм Кількість шпинделів: 2 штуки Максимальна частота обертання шпинделя: 8000 1/хв Довжина: 2500 мм Ширина: 1460 мм Висота: 2250 мм Вага: 4000 кг Обладнання: Барний живильник
Control voltage: 24V DC, rated current: 85A, connected load: 39kVA, rated power: 49kW, control-on operating hours: 32,779h, automatic operation 1: 5,040h, automatic operation 2 operating hours: 1,844h, production time: 33,731h, length: 3231mm, width: 2076mm, height: 1917mm, weight: 4.8t, with documentation, chip conveyor and FMB turbo 8-80 bar feeder. An on-site inspection is possible.
Rated current: 60A, control voltage: 24V, connected load: 33kW, length: 2290mm, width: 1350mm, height: 1630mm, weight: 4.65t, operating hours: 78,439h, with documentation, chip conveyor and bar feeder. An on-site inspection is possible.
Traub TNX 65Year of manuf. : 2011 Control : Mitsubishi TX8i-s ____________Description:Mainspindle:Technology:MotorspindleSpeed:5.000 rpmPower:22,6 kWTorque:180 NmBarcapacity:65 mmWorkpiececlamping:Collet chuck, Hainbuch Spanntop Kombi Axfix Gr. 65Subspindle:Technology:MotorspindleSpeed:5.000 rpmPower:22,6 kWTorque:180 NmWorkpiececlamping:Collet chuck, Hainbuch Spanntop Kombi Axfix Gr. 65Ejector:Hydraulic with flushToolcarrier I (X/Y/Z):Technology:Turret with 10 stationsTaper:VDI30Tooldrive:6.000 rpm, 5,5 kW, 17,5 NmMovement in X/Y/Z:175/80/650 mmRapid travers in X/Y/Z:20/20/40 m/minToolcarrier II (X/Y/Z):Technology:Turret with 10 stationsTaper:VDI30Tooldrive:6.000 rpm, 5,5 kW, 17,5 NmMovement in X/Y/Z:175/80/650 mmRapid travers in X/Y/Z:20/20/40 m/minToolcarrier III (X/Y/Z):Technology:Turret with 10 stationsTaper:VDI30Tooldrive:6.000 rpm, 5,5 kW, 17,5 NmMovement in X/Y/Z:175/80/650 ...
Key data: 110 mm, 450 mm, 5600 1/min
Рік виробництва 1996 Керування: TX8 F включаючи Simag 42.1 bar feeder Рік будівництва 2003 Підводник для бару має максимум приблизно 3,2 м для 3 м барів. з великою кількістю аксесуарів Машина досі працює під приводом і доступна у короткий термін
This 10-axis TRAUB TNK 36 horizontal turning machine was manufactured in 2002. It features a main spindle speed of 6,300 rpm and a counter spindle speed of 6,300 rpm. The machine includes a maximum workpiece diameter of 32 mm and a coolant tank capacity of approximately 360 liters. If you are looking to get high-quality turning capabilities, consider the TRAUB TNK 36 machine we have for sale. Contact us for further details.
An unused Traub CNC twin-spindle turning and milling center with peripheral equipment is available. Spindle types 1/2: D76/D76, max. turning length: 900mm, max. workpiece diameter: 76mm, number of tool carriers: 3, control system: Traub TX8i-s V8. Main spindle bore: 76mm, taper size: 6, hollow clamping cylinder: D76/20, indexing: 2.5°, clamping pressure range: 8bar-75bar. Counter spindle bore: 76mm, taper size: 6, hollow clamping cylinder: D76/20, indexing: 2.5°, clamping pressure range: 8bar-75bar. Upper tool carrier: axes: X/Y/Z, stations: 12. Lower left tool carrier: axes: X/Y/Z, stations: 12. Lower right tool carrier: axes: X/Y/Z, stations: 12. Including Isi Elbaron RON4DHEC mist extraction and filtration system, custom-built circulation conveyor, Bürener hinged belt chip conveyor, Bürener Eco-Fluid coolant system (600l), cooling unit, coolant chiller, Traub WH workpiece handling ...
A factory-reconditioned CNC counter-spindle lathe from Traub, overhauled in 2018, including a bar feeder, is available. Main spindle bore: 36mm, speed: 6300rpm, counter spindle bore: 32mm, speed: 6300rpm, Z4 travel: 250mm, rapid traverse Z4: 30m/min, max. workpiece length: 200mm, max. workpiece diameter: 32mm, control system: Traub/Index TX8i, operating hours: approx. 147000h. Upper tool carrier: X2 travel: 50mm, Y2 travel: +/-20mm, Z2 travel: 100mm, rapid traverse X2/Y2/Z2: 15m/min, tool stations: 12, speed: 6000rpm. Front tool carrier: tool stations: 5, X3 travel: 370mm, Z3 travel: 250mm, rapid traverse X3/Z3: 30m/min, max. tool diameter: 40mm, speed: 6000rpm. Rear tool carrier: X4 travel: 73mm, Y4 travel: +/-150mm, tool stations: 5, rapid traverse X4/Y4: 15m/min, tool diameter: 40mm, speed: 6000rpm. Including Resy compact belt filter, Knoll 240S-1/100 hinge-belt conveyor, travelling w ...
