性能范围：20mm-60mm，最大弯曲角度：180+10，最大弯曲 径：150mm，有效长度：3048mm，弯曲高度：1050mm，最大 截面模量：12.1cm³，弯曲公差：+/-0.1，工作压力：200ba r，连接负载：4kW，机器尺寸 X/Y/Z：约 2000mm/900mm/1200mm，重量：约 500kg。可用的文档。可以进行现场检查
- 工作区域管钢 ∅ 最大 30 mm x 2 mm - 管道工作区域不锈钢 最大 30 mm x 1.5 mm - 管道延伸长度 2,000 mm - 弯曲角度高达 180 + 10 过度弯曲 - 自动弯曲顺序（弯曲、扭曲、纵向） - CNC 控制器 - 带 Transpro V2 + Tanspro V2 软件包的输入 PC（注明前任所有者） - 通过手动开关触发功能 - 顺时针弯曲方向 - 最大半径范围 125 mm mm -自动。心轴润滑 - 用于安全区域的激光扫描仪 - 包括现有使用的不锈钢管 1 mm ∅ 15、18、22、28 mm 工具 弯曲半径 1.5 D（各种皱纹平滑器、心轴
- 圆管钢 DM 6 – 42 x 5 mm - 圆管不锈钢 DM 6 – 42 x 3 mm - 管道推入长度最大 6,000 mm - 可编程逻辑控制器，多达 20 个角度 - 纵向位移的数字显示 - 扭转的数字显示 - 可编程、预期芯轴回缩 - 手动泵芯轴润滑系统 - 皱纹更光滑的插座 - 最大弯曲速度 13/sec - 弯曲角度高达 180 + 10 次挠度 - 手动进纸 - 手动加捻 - 向右弯曲方向 - 半径从 1.5 D - 包括折弯工具： - DM 12 mm - 半径 36 mm ） / DM 15 mm - 半径 37.5 mm - DM 18 mm - 半径 36 mm - DM 22 mm，半径 44 mm，带芯轴 - DM 42 mm，半径 44 mm，带芯
Manufacturer: Transfluid Model: AB6-50 VE Type of Machine : Bending machine Can bend pipes up to DN50 by 90° Find more here - .ucymachines/ Contact us at - sales@ucymachines
tube diameter:40-90 mm wall strength:20 mm weight of the machine ca.:11 t dimensions of the machine ca.:4 x 1,6 x 1,35 m bending radius max.:270 mm This machine is a mandrel bending machine that was designed exclusively for the production of pipe bends with pipes of 40 mm ? 90 mm outer diameter with a maximum wall thickness of 20 mm or for processing solid materials up to 70 mm outer diameter (max. section modulus 64.7 cm³) and is therefore intended only for this purpose. Scope of delivery, machine equipment, basic equipment ? Pipe length/usable length for mandrel bending: 3000 mm ? Radius range max. 270 mm ? Bending height 1050 mm ? Electro-hydraulic drive ? Clockwise bending direction ? With hollow shaft to achieve small radii ? Counter bearing rotates ? Rotates up to 180 degrees with a maximum tool radius of 270 mm ? Forward movement controlled via hydraulic cylinder with pressure va ...
tube: 6000 mm tube diameter: 42 x 3,0 mm wall strength: 3,0 mm bending radius min.: 150 mm total power requirement: 5,5 kW weight of the machine ca.: 1,2 t dimensions of the machine ca.: 7500 x 1.400 x 1.300 m Round steel tube: up to Ø 42 × 3.0 mm Round stainless steel tube: up to Ø 42 × 2.0 mm Square tube: 25 × 2.5 mm Max. section modulus: 4.1 cm³ Bending angle: up to 180° + 10° overbending Bending time at 90°: 2.7 sec. (forward stroke) Longitudinal feed speed: 450 mm / 1.5 sec. Rotary positioning speed at 90°: 1.0 sec. Repeatability of bending axis: ± 0.2° Controlled length tolerance: ± 0.3 mm Controlled rotation tolerance: ± 0.2° Tube loading length / usable length for mandrel bending: 4,100 mm Max. radius range: 150 mm Bending height: 850 mm Free-standing bending head: 850 mm long Bending axis drive: electro-hydraulic Rotation and length positioning: automatic via gear ...
tube diameter: 60 mm wall strength: 6 mm bending radius min.: 180 mm total power requirement: 5,5 kW weight of the machine ca.: 1300 t dimensions of the machine ca.: 3500 x 1250 x 1300 m Description: Round tube steel (S235): 60.0 x 6.0 mm Round tube stainless steel (S 355): 60.0 x 4.0 mm Square tube steel: 50 x 50 x 4.0 mm Rectangular tube steel: 60 x 40 x 2.0 mm max. usable length: 3048 mm Bending speed: 10°/sec including tools (see photos) Mandrel is no longer available, can be retrofitted The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
tube diameter: 4-28 mm wall strength: / mm bending radius min.: 1,5 x D - 2,0 x D mm control: Siemens LOGO delivery rate: 4,5 l/min bending angle max. +/-: 190 ° nominal pressure: 250 bar operating pressure: 3095 bar delivery rate: 4,5 l/min total power requirement: 1,5 kW Tube diameter: 4 – 28 mm Wall thickness: on request Minimum bending radius: 1.5 × D – 2.0 × D Control system: Siemens LOGO! Hydraulic flow rate: 4.5 l/min Max. bending angle: ±190° Rated pressure: 250 bar Operating pressure: 3,095 bar Total power requirement: 1.5 kW Additional Information Hydraulic cylinder drive with roller chain transmission. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
二手
tube diameter: 40-168 x10,0 mm wall strength: . mm bending radius min.: ohne Rohr 190 mm voltage: 380 V operating pressure: 200 bar total power requirement: . kW weight of the machine ca.: 22 t dimensions of the machine ca.: 7,50x2,8x1,6 ( 30 m²) m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoT ...
二手
tube diameter: . mm wall strength: 15 St52 und Edelstahl mm bending radius min.: 6-120 mm bending angle max.: 150 ° weight of the machine ca.: 1,7 Kg dimensions of the machine ca.: 2000x2000x1300 m The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
