TOS VARNSDORF machine à vendre

Key data: 130 , 3500 , 2000

CNC SIEMENS 840D Axe X (longitudinal) 3500 mm Axe Y (transversal) 2000 mm Axe Z (vertical) 1250 mm Longueur de la table 1800 mm Largeur de la table 1800 mm Poids maximum de la pièce 12000 kg Diamètre de la broche 130 mm Vitesse maximale de la broche 800 tr/min Magazzino utensili 52 posti Moteur de broche 37 kW Année de révision 2005 ------------------- Longueur x largeur x hauteur 7200 × 7800 × 4900mm Poids 32000 kg

Contrôle Heidenhain TNC 407 Année 1996 Poids de la pièce 2200 kg X = 1250mm Y = 1125mm Z = 950mm La machine peut être vérifiée sous tension

X=3500mm Y=2000mm Z=1250mm W=800mm H=360° broche 130 mm, ISO 50, max. 1600 tr/min table 1600 x 1800 mm avec une charge de 12000 kg avec Siemens électrique et CNC Heidenhain TNC 415B Refroidi à l’huile : Schimpke. Démantelé. La machine a été très peu utilisée = en très bon état technique.

Unité de forage de table W 100 A Fabricant: TOS Varnsdorf BJ: 2019 (G) Diamètre de fuseau ... 100mm 100mm Axe X ... 1600mm 1600mm Axe Y ... 1120mm Vitesse de fuseau ... 7-1120 tr/min. Axe W ... 900mm 900mm Axe Z ... 1250mm ISO 50 Charge de table maximale ... 3000kg L x W x H ... 6710 x 3450 x 3000mm Poids de la machine ... 14000 kg Puissance du moteur principal... 11kW Demande totale d’électricité ... 17kVA Zone de table de serrage ... 1250 x 1250mm Diamètre de disque plat... 600mm 600mm Diamètre de circulation maximale ... 900mm 900mm La machine est possible de tester sous la puissance, avec une garantie d’un an.

There are one TOS WH10 TNC and one TOS WH10 CNC available, x-travel: 1250mm, y-travel: 1100mm, z-travel: 1000mm, W-travel: 600mm, table dimensions: 1100x1000mm, with accessories, various tools, holders, spindles, cutter heads, boring heads, tool cabinets and clamping screws.

The machine is in good technical condition. Working spindle diameter: 90mm Transverse table adjustment: 1120mm accessories for the machine include a column crane A tour is possible by prior arrangement.

Machine in good technical condition, possibility of testing after agreement. Weight: 12000 kg Control: TNC 360. X axis (longitudinal) 1250 mm Y-axis (pricna) 1000 mm Z axis (vertical) 900 mm Table length 1000 mm Table width 1120 mm Workpiece weight 3000 kg Spindle diameter 90 mm Max. shaft speed 1120 rpm Shaft motor power 20 kW

The machine is in good technical condition. Spindle bore: 80 mm Taper: Morse 5 Equipment: Own crane Digital measurement 1000 x 500 console It was used once a year for light drilling or milling. By prior arrangement, the possibility of a tour in progress.

Machine weight: 13400 kg Total power of the machine:: 20 kW Diameter of the working spindle: 100 mm Spindle taper: ISO 50 Spindle speed: 4 - 1400 rpm Table clamping surface: 1000 x 1120 mm

The machine is in good technical condition. Working spindle diameter: 100m Clamping surface of the table: 1000x1120 By prior arrangement, the possibility of a tour in progress.

in good technical condition. Working spindle diameter: 100m Clamping surface of the table: 1000x1120 A tour is possible by prior arrangement.

Machine weight: 17500 kg Total power of the machine:: 10 kW Diameter of the working spindle: 100 mm Spindle taper: ISO 50 Spindle speed: 7.1 - 1200 rpm Table clamping surface: 1250 x 1250 mm

The WHN 13.8B CNC boring machine is in good technical condition, HEIDENHAIN control system. The year of GO 2001 Total machine input:: 37 kW Working spindle diameter: 130 mm Spindle taper: ISO 50 Spindle speed: 2500 rpm Clamping surface of the table: 1800x2200 mm Transverse movement of the table - x-axis: 3500 mm Longitudinal movement of the table - z axis: 1200 mm Vertical table movement - y axis: 2500 mm

Year of Manufacture/SO/GO: 1987/-/2001 Description: The machine is in very good technical condition, dismantled, stored in storage. 5 persons X (table lift) 5000 mm Y (vertical lift of headstock) 2000 mm Z (longitudinal displacement of the column) 1250 mm W (spindle travel) 800 mm Engine power: 37 kW Spindle speed range: 1.25-900 rpm Rapid feed: 4000 mm/min Spindle diameter: 130 mm Table: 1800 x 1800 mm Machine weight: 12000 kg Spindle taper: ISO 50. control system HEIDENHAIN

Year of manufacture/SO/GO: -/-/2005 The machine is in good technical condition, it is possible to test it by agreement. Modernization in 2005, digitally controlled horizon. Machine weight 13400 kg. Diameter of the working spindle 100mm. ISO 50 spindle taper. Maximum workpiece weight 3000kg.

The machine is in good technical condition. Working spindle diameter: 100mm Transverse table adjustment: 1250mm

The machine is in good technical condition, it is possible to test it by agreement. Work table 1800 x 1800mm. Machine dimensions: 7150 x 6280mm, height 5164mm. Main engine 80kW.

Working spindle diameter: 75mm Table clamping surface: 950x950mm Digital measuring X-axis travel 1,250 mm Y-axis travel 900 mm Z-axis travel 1,060 mm Spindle speed 18 - 1800 /min. Spindle extension (W) 560 mm Power of the main electric motor 11 kW Max. table load 3,000 kg Dimensions LxWxH 4500 x 3400 x2800 mm Machine weight 10t Inspection possible upon agreement. Accessories: support column

The machine is in good technical condition. Table working area: 950 x 950 mm Maximum table load: 3000 kg Maximum tool speed: 1800 rpm X-axis travel: 1250 mm Y-axis travel: 900 mm Z-axis travel: 1000 mm Spindle extension W: 560 mm Po by prior arrangement, the possibility of a tour in progress.

The machine is in good technical condition, control system HEIDENHAIN 310. With circular interpolation. A tour is possible upon agreement. Basic parameters 100 mm; 1000 x 1120 mm Machine weight: 13400 kg Total power of the machine:: 20 kW Diameter of the working spindle: 100 mm Spindle taper: ISO 50 Spindle speed: 4 - 1400 rpm Table clamping surface: 1000 x 1120 mm

Drilling capacity: 30 mm Throat: 30 mm Spindle taper: 30   CNC Brand: Heidenhain CNC Model: HeidenHain TNC 430 5 Axis CNC Horizontal borer Spindle Hours 18.300 Optional HU 50 Universal milling head ( rotation 1 direction C-Axis) Hydraulic tool clamping External coolant system X - Travel:              1250mm Y - Travel:              900mm Z - Travel:              630mm W - Travel:              1000mm Table Length:            1120mm Table Width:             1000mm Table load:              3000 Speeds / ranges:         2500Rpm Power:                   30kW Spind ...

Spindle diameter: 120 mm Cross X: 3500 mm Vertical Y: 2500 mm Table length: 2200 mm Table width: 1800 mm Positions ATC: 60   Number of pallets: 1   CNC Brand: Heidenhain X - Travel:               3500mm Y - Travel:               2500mm Z - Travel:               1250mm W - Travel:               800mm Table Length:             2200mm Table Width:              1800mm Table load:               12000 Speeds / ranges:          3000Rpm Power:                    37kW Spindle Taper:            50ISO/Bt/Mk Feed rate  ...

spindle diameter: 130 mm x-travel: 2000 mm y-travel: 2000 mm z-travel: 1250 mm w-axis: 800 mm Control: Heidenhain type: TNC 135 table surface area: 1800x1800 mm Table load: 12000 kg power capacity: 30 kW 09-08 machine number The techn. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About usMore than 400 of our own machines in the warehouseMore than 12,000 m² of storage space, crane capacity 70 tMore than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company,then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Spindle diameter: 50 mm Cross X: 1600 mm Vertical Y: 1120 mm Table length: 1250 mm Table width: 1250 mm Positions ATC: 1   Number of pallets: 1   Table type boring millTOS VARNSDORF - W100A X - Travel:    1600mm Y - Travel:    1120mm Z - Travel:    1250mm Table Length:  1250mm Table Width:   1250mm Table load:    3000 Speeds / ranges:1120Rpm Power:         11kW Spindle Taper: 50ISO/Bt/Mk Length:        6000mm Width:         3700mm Height:        3200mm Weight:        13600kg

Drilling capacity: 130 mm Throat: 90 mm Spindle taper: 90   CNC Brand: Heidenhain CNC Model: HeidenHain TNC 355 X - Travel:              3500mm Y - Travel:              2500mm Z - Travel:              800mm W - Travel:              1250mm Table Length:            1800mm Table Width:             1600mm Table load:              12000 Speeds / ranges:         1200Rpm Power:                   37kW Spindle Taper:           50ISO/Bt/Mk Feed rate X-Axis:        6000mm/min. Feed rate Y-Axis:        6000mm ...

Diamètre de la broche: 100 mmCross X: 1120 mmNical Y: 1250 mmDurée de la table: 1250 mmLargeur de la table: 1250 mmPositions ATC: 0 Nombre de palettes: 0 MAKE   TOS Varnsdorf TYPE     H 100 A année Spécifications Controll   Conventionel Foreur de sol ou de      table X - Débattement   1120 mm Y - Débattement    1250 mm Z - Débattement    1250 mm W - Débattement    900 mm Diamètre de   la broche 100 mm Conique de   broche MK 6 Vitesses de broche / plages   900 tr/ min Table Longueur x Largeur    1250 x 1250 mm Charge de table en kG    3000 Kg taille Longueur    6000 mm Largeur     3700 mm Hauteur    3000 mm TOS Varnsdorf H100A Foreuse horizontale