Cream separator (Skimmer). Self cleaning. Machine comes with the bowl (serial number 4081033), motor, OWM C water valve (original Tetra Pak) and all inlet / outlet pipes with pumps., Additional features:, Excluding:, - Motor cover., - Baseplate with feet., - Water panel., - Control panel., - Service tools for maintenance., Type of Machine: Cream Separator / Skimmer, Capacity: 35.000 liter per hour, Bowl speed: 4.150 rpm, Motor: 37 kW - 400 V - 50 Hz - 1.479 rpm - 68,0 Amp - 3 Ph, Year of refurbishing: 2026, Weight: 2.275 kg, Dimensions: 195 x 135 x 185 cm
Tetra Pak Tetra Therm Aseptic Visco Line for pasteurisation / sterilization of concentrated beverage bases by a Tubular Heat Exchanger (THE) system. Capacity 2.600 up to 8.150 liter per hour. At the current plant the line is used for products up to 100 °C. The indirect heating temperature is up to a maximum of 135 °C. Holding time set at 0 / 5 / 10 seconds. CIP Cleanable., In the Tetra Therm Aseptic Visco system, heating and cooling will take place in Tetra Spiraflo MTC tubular heat exchangers. Modules with a narrow ring section are used for heating and cooling to ensure optimal heat transfer. The product is pre-heated in stages within the Spiraflo tubular heat exchangers. The Spiraflo tubular heat exchanger is equipped with a sliding O-ring system. This means that the product and the outer tubes are not welded together. This prevents stress corrosion cracking and minimizes maintenance ...
Tetra Pak Aseptic Dosing unit F is a unique and innovative new technique where functional ingredients are injected with high precision into the base product after the final heat treatment, just before filling. Used for UHT applications, providesautomatic aseptic in-line dosing of ingredients. Ingredients that are suitable for aseptic dosing by the Tetra Pak Aseptic Dosing Unit F: dose sensitive ingredients like enzymes e.g. lactase, vitamins, minerals, Omega 3, probiotics, flavours, colours in everything from plain milk to formulated products. The system ensures the survival and stability of heat sensitive function that the charachteristics of the ingredients are not changed. It fits with any filling machine with a capacity between 1.000 - 20.000 l/hr with a continuous flow. The Tetra Pak Aseptic Dosing unit F is fully automated and installed between aseptic processing and the aseptic fi ...
Tetra Pak Tetra Spiraflo Tubular Heat Exchanger (THE) previously used in a dairy for whey protein as pre-heater with indirect hotwater preparation (15 - 70 °C), holding section (1 - 3 minutes) and cooling section (65 - 10 °C)., Unit exist out of:, - 7x tubes for pre-heating (Tetra Pak MT-38/1x20s-6, total surface area: 2,25 m2, product connection DN25, hotwater connection DN20 with indirect hot water system with plate heat exchangers, pumps (CH18-10 A-W-G-BQQV - 7,5 m3/h - 0,72 kW), steam valves (Samson), expansion vats, manual valves and interconnecting piping., - 9x tubes for cooling (Tetra Pak MT-70/4x16s-6s-1, jacket: 20 bar - 110°C - 16 liter, inside: 50 bar - 110 °C - 3,6 liter, total surface area: 10,17 m2, product connection DN38, (ice)water connection DN50)., - Flowmeter (Endress+Hauser - Promag 300)., - Holding tube, DN 40 (6x 6 meter), complete with bracket and swivel bend ...
Dispositif d’admission inutilisé, raccord de pince pour séparateurs Tetra Pak 618 - 718 - 818., Réf 22 - Pièce n° 548412 01 - Logement d’admission, Réf 23 - Pièce n° 538247 04 - Accouplement à pince, Réf 24 - Pièce n° 538248 03 - Joint, Réf 25 - Pièce n° 541709 80 - Tuyau coudé, Type de machine : Dispositif d’admission, accouplement à pince
Unused Outlet Pipe + Sleeves + Impellors of a Tetra Pak HMRPX 618 Separator., Ref 1 - Part No 540493 02 - Outlet pipe, Ref 3 - Part No 581978 01 - Guide sleeve, Ref 16 - Part No 540527 02 - Impellor bottom part Ø 140 mm, Ref 20 - Part No 540519 02 - Impellor top part Ø 140 mm, Ref 26 - Part No 540551 01 - Spacing sleeve, Ref 38 - Part No 540528 02 - Impellor bottom part Ø 120 mm, Ref 40 - Part No 540520 02 - Impellor top part Ø 120 mm, Type of Machine: Outlet set
Tetra Pak automatic direct standardisation unit which is designed to handle skimming of whole milk and standardisation of cream or standardisation of both cream and milk. Skid mounted unit including PD340 Magnetic flow transmitter for standardised milk, PD340 Magnetic flow transmitter for cream remixing, PD340 Magnetic flow transmitter for standardised cream, density transmitters, valves, some interconnecting piping and a control panel with recorder of fat content, display for flowtransmitter and Alfa Laval Alfast Operator Panel. Previously used in combination with an Alfa Laval HMRPX 714 HGV-74C milk skimmer separator (20.000 liter per hour)., Additional features:, Some clamps for connection / piping are missing., Type of Machine: Standardisation unit for milk, Capacity: 20.000 ltr/h, Weight: ± 500 kg, Dimensions: ± 120 x 120 x 220 cm
Maniomètre Tetra Pak non utilisé, 0 - 10 bar / 0 - 1,0 MPa., Modèle : 233.50.100 LBM 990.22 1 1/2 Tri-clamp 10 bar/MPa., Numéro de pièce : 90522-0172., Type de machine : manomètre
Tetra Pak desserts pilot UHT plant with an pasteurisation, indirect and/or direct (VTIS) heating module @ 225 ltr/h and only a pasteurisation step @ 125 ltr/h, previously used in a R&D centre for desserts., Indirect unit, skid mounted, including:, - Open level tank, serial number: DFB-5259-BT01, year 2008, 50 ltr with propellor agitator (Lightnin ECL-M59-25)., - Feed pump (mono / screw pump, Netzsch, NM031BH02S12H, serial number 387231, year 2007, 120 - 300 ltr/h, speed 20 - 80 rpm, discharge pressure 2 bar, product temperature 5 - 20 °C)., - Lobe pump, Alfa Laval, SRU1/005/LD, serial number 431441, year 2008, motor: 0,37 kW, 400 V, 50 Hz, n1: 1.360 rpm, i: 15,57 n2: 89 rpm., - Heating module A, centrifugal pump: Alfa Laval FM-0/95, serial number: 31457-17997., - Heating module B, centrifugal pump: Alfa Laval FM-0/95, serial number: 31457-17999., - Heating module C, centrifugal pump: Al ...
Tuyau de remplissage inférieur, précédemment utilisé sur un Tetra Pak A3 Flex 250 ml Slim 100V., Type de machine : Machine de remplissage aseptique à cartons, Dimensions : 84 x 9 x 9 cm, Poids : 2 kg
Tetra Top Cleaning unit (TTCU) previously used on Tetra Pak TT/3 2000 carton filler for Tetra Top 250 Mini Eifel C38 cartons. The external Tetra Top® Cleaning Unit offers excellent cleaning and disinfection of your hygiene chamber. You can clean and disinfect both sides simultaneously or choose to clean and disinfect one side at a time. One unit is able to clean up to two Tetra Pak® TT/3 filling machines. 3x separate vats for P3-oxonia active S, Mip CA and P3-horolith V. Integrated centrifugal pump (11 kW). Control panel with PowerFlex40 frequency converter and ABB RVG200 operator panel. 6x valves with pneumatic actuator (Air Torque AL-79)., Type of Machine: Cleaning unit, Development step: -0200, Production hours: 1.166 hours, Drawing Spec.: 2866825-0200, Dimensions: 145 X 125 X 295 cm, Weight: 850 kg
Tetra Pak Capper 60 Cap applicator, previously used for Tetra Top 200 and 250 ml Mini cartons with a A5 38 screwcap. This cap applicator was running in combination with a Tetra Pak TT/3 2000 carton filler. The applicator has a small footprint. Number of productions hours: 5.268 h. Applying caps quickly and accurately. The Tetra Pak Capper 60 uses a feeding screw and six torque- and speed-adjustable rotary capping heads to apply caps on stationary packages. Change package heights within the same bottom format in only five minutes. Control panel with Allen-Bradley CompactLogix L36ERM PLC and separate operation panel with Tetra Pak touch screen panel. The production capacity goes up to 4.500 packs per hour. Including collecting vat and elevator (Bonino, Auxiliary Feeder, code nr 56849, date 2018). Including all available manuals and all programs (language in program English and Swedish). Ca ...
Tetra Top Sprue Remover Unit (SRU) for removal of the small plastic particle on top of the Tetra Top packaging after filling/closing, previously positioned after a Tetra Pak TT/3 2000 carton filler for Tetra Top 200 and 250 ml Mini cartons with a A5 38 screwcap. Including stainless steel control panel and separate operation panel., Type of Machine: Sprue Remover Unit, Capacity: 4.500 pieces per hour, Type of carton: Tetra Top 200 and 250 ml Mini cartons, Development step: - 0100, Drawing Spec.: 3434618-0100, Weight: ± 325 kg
The Tetra Pak Tetra Straw Applicator (TSA 46) has a compact design and is very reliable. Trouble-free operation in a carton filling lines is guaranteed even with long periods of use. It is installed between the filling machine and the packaging machine and has servo motors and inverters. The regulated and controlled application of the straw is thus made possible without any problems. The constant and trouble-free speed of up to 8.000 units/h is ideal for use in conjunction with the Tetra Pak TBA 19 filling machines. Previously used for 200 ml Slim cartons with U-Straw 4. Production hours: 92.204 hours. Including Nordson ProBlue 4 hotmelt unit. MM + SPC + EM Manuals available., Type of Machine: Straw applicator, Capacity: 8.000 pieces per hour, Type of carton: 200 ml Slim, Development step: 10V, Drawing spec.: 678547-0101, Production hours: 92.204 hours, Dimensions: ± 230 x 100 x 210 cm, ...
The Tetra Pak Tetra Cardboard Packer 70 (TCP 70) is an automatic secondary packaging machine designed for grouping and packing filled Tetra Pak carton packages into wrap-around cardboard or corrugated board cases. It is widely used in dairy and beverage packaging lines operating in ambient conditions. It is flexible and has a number of possibilities when it comes to package sizes, packing patterns and cardboard units. This machine is previously used for 1 Liter Slim / Base cartons, 4x2, in a tray (not wraparound). Output: up to 7.000 cartons/hour (depending on format and configuration). Feeding side: Left hand. Infeed type: Multi. Infeed: U-form. Conveyor speed in: 35 m/min. Conveyor width: B79/B65. Hotmelt unit (Robatech KPC12, serialnr 134590, year 2005)., Type of Machine: Cardboard Packer, Capacity: up to 7.000 cartons per hour, Type of carton: 1.000 ml Slim / Base, Development step: ...
Tetra Top Granulate Supply Unit (GSU) previously used on Tetra Pak TT/3 2000 carton filler for Tetra Top 200 and 250 ml Mini cartons with a A5 38 screwcap. Including side channel blower and vacuumpump from Gardner Denver, G-BH1 2BH1510-7HH57, 4 kW - 345 / 415 V - 50 Hz - 2.920 rpm, pressure: 390 - 440 mbar and control panel with Allen-Bradly PLC., Type of Machine: Granulate Supply Unit, Capacity: 9.000 pieces per hour, Type of carton: Tetra Top 200 and 250 ml Mini cartons, Development step: - 0500, Drawing spec.: C-1025041-0500, Weight: ± 250 kg
Tetra Top Sprue Remover Unit (SRU) for removal of the small plastic particle on top of the Tetra Top packaging after filling/closing, previously positioned after a Tetra Pak TT/3 2000 carton filler for Tetra Top 200 and 250 ml Mini cartons with a A5 38 screwcap. Including stainless steel control panel and separate operation panel., Type of Machine: Sprue Remover Unit, Capacity: 4.500 pieces per hour, Type of carton: Tetra Top 200 and 250 ml Mini cartons, Development step: - 0100, Drawing spec.: 3434618-0100, Weight: ± 325 kg
Unused Servo Control for a Tetra Pak Cap 30 Flex. Tetra Pak article number: 90605-9390. Official Tetra Pak description: Servo-Antrieb, K5500 EtherNet/IP 528VAC., Type of Machine: Servo drive, CAT NO: 2198-H025-ERS, Instructions: 2198-IN001x-xx-x, MAC Address: 40:41:01:E0:74:10, Main input: 195-264/324-528 Vac 8.3 Arms 3 Ph 50/60 Hz, Control input: 24 Vdc 2.8A, Motor output: 0-460 Vrms 3 Ph 0-590 Hz 8 Arms Continuous, 20 Arms Peak
Tetra Pak Capper 60 Cap applicator, previously used for Tetra Top 200 and 250 ml Mini cartons with a A5 38 screwcap. This cap applicator was running in combination with a Tetra Pak TT/3 2000 carton filler. The applicator has a small footprint. Number of productions hours: 5.015 h. Applying caps quickly and accurately. The Tetra Pak Capper 60 uses a feeding screw and six torque- and speed-adjustable rotary capping heads to apply caps on stationary packages. Change package heights within the same bottom format in only five minutes. Control panel with Allen-Bradley CompactLogix L36ERM PLC and separate operation panel with Tetra Pak touch screen panel. The production capacity goes up to 4.500 packs per hour. Including collecting vat and elevator ( Bonino, Auxiliary Feeder, code nr 57822, date 2019 ). Including all available manuals and all programs (language in program English and Swedish). ...
Triclamp complet de sortie non utilisé incluant tuyau de sortie + manchons + Imppelleurs Bactofuge Tetra Pak BM618 / BM714, Numéro d’unité de machine ou description du sous-ensemble : 562012-03 selon le plan du dispositif de sortie, Type de machine : Sortie complète
J’ai utilisé une machine à remplir des cartons pour le lait, le yaourt, la crème, etc. Fabriquez TETRA PAK, Type : TR7 Année de fabrication : 2004 Sortie 6000 E/h, Volume de remplissage 250 ml, 500 l et 1000 ml Y compris le capper. - Désinfection du matériau d’emballage : H2O2 et lampe UV Très bon état
Machine à emballer le film – TFW67 Fabricant : Tetra Pak Modèle : TFW67 Année de fabrication : 2004 État : Utilisé Type de machine : Enveloppe de film / Machine d’emballage secondaire Machine Description Disponible à la vente : Machine d’emballage de film Tetra Pak TFW67 d’occasion, conçue pour l’emballage secondaire à grande vitesse des cartons. Cette machine d’enroulement de film entièrement automatique est conçue pour un fonctionnement industriel continu et des performances fiables dans des environnements de production exigeants. Le TFW67 est une plateforme Tetra Pak éprouvée, largement utilisée dans les gammes d’emballage laitier et de boissons, offrant une formation stable des emballages, une application précise du film et une intégration fluide des lignes. Spécifications techniques Formats d’emballage : 4 × 1 4 × 2 Capa ...
Système de microfiltration – Élimination des bactéries (applications laitières) Fabricant : Tetra Pak Modèle : Tetra Alcross M Année : 2005 Automatisation : Entièrement automatique Application : Extraction de bactéries / microfiltration pour produits laitiers Description Le Tetra Alcross M est un système de microfiltration de qualité industrielle conçu pour une réduction efficace des bactéries et des spores dans la transformation laitière, avec un accent principal sur le lait écrémé. Conçu pour un fonctionnement continu, le système est doté de membranes en céramique à double couche haute performance, ce qui le rend idéal pour la production de lait ESL et d’autres applications laitières de haute hygiène. Sa construction robuste et sa fiabilité éprouvée des procédés garantissent une qualité constante des produits et une efficacité opération ...
Type d’emballage Tétra-prisma aseptique Forme de l’emballage Square Line Volume d’emballage 1000,00 ml Tension 3N 400/230 V Fréquence 50 Hz
D’occasion, en très bon état Type d’emballage : Tetra Prisma Aseptic Volume du paquet : 1000,00 ml Forme de l’emballage : Squareline
Tetra Pak TBA19 Ligne de remplissage et d’emballage aseptique mince de 200 ml Configuration complète - Excellente opportunité pour la production de boissons aseptiques à haut volume Nous sommes heureux de proposer une ligne complète d’emballage aseptique Tetra Pak, conçue pour un format de carton mince de 200 ml. Cette ligne comprend la remplisseuse TBA19, l’applicateur de paille 21, l’emballeuse multirétractable Tetra Pak (TFW 72) et l’emballeuse de carton 70. Une solution clé en main parfaite pour les producteurs des secteurs des produits laitiers, des jus ou des boissons à la recherche d’une technologie éprouvée et d’une capacité de production solide. Équipement et spécifications inclus 1. Tetra Pak TBA19 200 S Spécification : 648160-0101 Année de fabrication : 1998 Heures de fonctionnement : 16,727 h Volume de remplissage : 200ml ...
utilisé
Un ensemble complet de pièces de rechange de Tetra Pak est disponible. Machines : systèmes d’emballage Tetra Pak et équipements associés. Pièces de rechange : Manchon pour raccords de tuyaux, cône ID6xD6mm aluminium, bague coupante 6mm, entretoises, ressort 1.00x12.00x50.0mm 1. 4310, vis M5x12, bague d’étanchéité 8x14mm, joint torique 15x2mm, bague de retenue DIN 471, ressort de soupape, roulement 6001-2RS, douille lisse 10x12x15mm, connecteur de tuyau 6mm, joint EPDM, mamelon de raccordement R1/8, douille de guidage 20mm, capuchon d’étanchéité en plastique, rondelle isolante 22x3mm, élément de serrage et autres. Documentation disponible.
À vendre : Tetra Pak® A3 Compact Flex – 125 ml Slim (2013) Vous êtes à la recherche d’une remplisseuse aseptique performante et peu encombrante ? Le Tetra Pak A3 Compact Flex (2013) est la solution idéale pour les producteurs de boissons et de produits laitiers à la recherche d’une production rentable, fiable et flexible. Avec une capacité de 9 000 paquets par heure, cette machine assure un fonctionnement efficace tout en maintenant les normes les plus élevées en matière de sécurité alimentaire. Caractéristiques et avantages clés : ✅ Production à grande vitesse et efficace 9 000 paquets/heure Production rapide et fiable ✅ Conception compacte et peu encombrante Ne nécessite que 20 m² d’espace au sol ce qui le rend idéal pour les environnements de production avec un espace limité. Hauteur : 4,3 mètres, permettant une intégration facile dans l ...
Nous avons l’emballeuse de carton Tetra Pak 32 CBP en très bon état dans notre entrepôt. Pour plus d’informations, n’hésitez pas à nous contacter.
