honing diameter:51 mm stroke:300 mm spindle speeds::600 - 3000 U/min feed range:1500 - 5000 mm/min spindle drive:1,1 kW weight of the machine ca.:0,8 t total power requirement:4 kW dimensions of the machine ca.:1,1 x 1,9 x 1,5 m
workpiece diameter: 660 mm workpiece length: 8000 mm honing/re-bore length: 7600 mm internal diameter: 50,8 - 609,6 mm stroke length max.: 7600 mm spindle motor: 29,8 kW spindle turning speed range: 0 - 300 U/min Lifting capacity: 13,5 kW stroke speed: 0 - 30,5 m/min workpiece weight: 8000 kg control: Siemens Simatic total power requirement: - kW weight of the machine ca.: 12,5 t dimensions of the machine ca.: 18,7 x 1,5 x 1,5 m Universal horizontal. Honing Machine / Long Stroke Cross Grinding Machine with servo drive and electrical feed system - Siemens Simatic (Touch) - Coolant system with paper band filter - steady rest The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
CONTROLS electronic controls WORKING RANGE -HONING- stroke max.: 170 mm stroke min.: 6 mm stroke rate (max.): 500 /min stroke rate (min.): 60 /min WORKING RANGE -INTERNAL HONING- Spindle speed from: 200 /min .. to: 3000 /min ELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 Hz DIMENSIONS / WEIGHTS space requirements -left/right-: 1200 mm space requirements -front/back-: 1600 mm total height: 1900 mm total weight approx.: 750 kg including partial equipment
インビッド番号 : 8364 タイプ:MBB-1660 プロデューサー:スネン 作成年月: 2022 パラメーター： 長さ範囲:最大400 mm 直径範囲:1.5-165 mm 機械の高さ:1600 mm 機械の長さ:1524 mm 機械の幅:762 mm
A vertical cross grinding machine Sunnen is available. Bore diameter range: 3mm-65mm, max. workpiece length: 250mm, working area dimensions X/Y/Z: 150mm/150mm/150mm, slide speed range: 0.001mm-0.8mm/s, stroke rate range: 30-400, spindle speed: 4000rpm, feed force: 3800N, grinding oil tank volume: 280l. Machine dimensions X/Y/Z: approx. 2150mm/2200mm/2900mm, weight: approx. 2200kg, operating hours: approx. 5000h. Including indexing table and grinding oil tank with magnetic separator and filter. Documentation available. An on-site inspection is possible.
honing diameter: 165 mm stroke: 120 mm centre height: 100 mm total power requirement: 1,5 kW weight of the machine ca.: 1 t dimensions of the machine ca.: m We are pleased to offer you ex our stock, subject to prior sale, and error in technical data : SUNNEN (USA) Horizontal Automatic Honing Machine model MBC 1804 G year Serial no 1K1-190075 _____________________________________________________________ Honing range – Ø with gauge control 1,5 – 51 mm with automatic stroke 1,5 – 95 mm with manual stroke 1,5 – 165 mm Workpiece honing length max. approx. 400 mm Workpiece honing lengthe with gauge control 254 mm 12 spindle speeds 200 – 2.500 rpm 5 stroke rates 80 – 310 stroke/min Length range of automatic stroke 6 – 120 mm Power of spindle 0,75 kW - 380 V - 50 Hz Total drive appro. 1,5 kW - 380 V - 50 Hz Accessories / Special Feature ...
SUNNEN ML2000, Honing Diameter Range:, - Manual Stroking: 1.5 mm to 165 mm, - Power Stroking: 1.5 mm to 102 mm, Spindle Speed:, - Infinitely variable from 200 to 3,000 RPM, Stroke Rate:, - 60 to 350 strokes per minute, Automatic Sizing Range:, - 3 mm to 51 mm, Oil Tank Capacity:, - 106 liters, Pneumatic Requirements:, - 5.5 bar, Machine Dimensions:, - Length: 1,600 mm, - Width: 1,220 mm, - Height: 1,900 mm, Weight:, - Approximately 725 kg
Sunnen 1804ホーニングマシン、手動式電源下 機械はGussago BSの倉庫で稼働しているのを見ることができます。 運転可能 Mimu工作機械、ホーニング直径(最小-最大):1.5-120、ホ ニング長さ(最大):250
ホーニングマシン、SUNNEN ML3500(ml5000 ml2000 ec3500 ml 5000 ml 2000のように)、このマシンは現在、完全な電子レト フィット(シーメンス)、タッチスクリーン下にあり す。ローダーインターフェースが可
回路基板、Sunnen ML3500 - ML5000 - ML2000、モデルPED 2202、動作状態で、 情報についてはお問い合わせくださ
Single pass - progressive honing machine, SUNNEN MHS 840 (like VSS 84), overhaul and electronic retrofit (see video and photos), 4 heads, 8-station rotary table This machine can be inspected under power in our warehouse Test run possible M i m u Machine Tools Gussago BS Italy, Single-pass honing is a type of honing process used for finishing internal cylindrical surfaces, where a tool with a fixed set of abrasive stones passes through the bore only once to achieve the desired surface finish and dimensional accuracy. In this process, the tool is typically designed with a specific shape and size, allowing for precise material removal in a single stroke
ホーニングマシン、SUNNEN EC3500、(ml3500 ml5000 ml2000など)、このマシンは現在、完全な電子改造(Sieme ns / Telemecanique)、タッチスクリーンの下にあります。ロ ダーインターフェースが可
Hoehnマシン - クロス研削盤 スネン ML 3500 (ML5000 と同様) ペーパーフィルターと磁気分離器を備えた外部タン を完備 機械はグッサゴBSの倉庫にあり、通電されています 試運転可能 ミム工作機械イタリ
 (1).jpg)
