We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
utilisé
Key data: 500 kN
Sumitomo Demag IntElekt 50/370-80 / Machine électrique Année de construction : 2009 Unité d’injection : Diamètre de la vis : 25 mm Poids d’injection : 39 g Pression de pulvérisation : 1580 bar Volume de dosage : 44 ccm Unité de serrage : Force de serrage : 50 t Espacement des barres d’accouplement : 370x370 mm Taille des plaques de serrage : 520x570 mm Éjecteur : électrique Unité de serrage : levier à bascule Contrôle : NC5 - Écran tactile Équipement supplémentaire : Machine électrique : haute vitesse, économie d’énergie et très silencieuse Euromap 67 Robot Interface Soupape d’air x 4 Contrôle à l’aide de canaux chauds Unité d’injection trempée - Bilame Lubrification centralisée Il est possible de modifier le diamètre de la vis Métrique: Poids : 4750 kg Longueur/Largeur/Hauteur : 4.20x1.26x1.84 m Condui ...
utilisé
FORCE DE SERRAGE : 250TON DIMENSIONS DU PLATEAU : 930 X 930 MM D.B.T.B : 630 X 630 MM HAUTEUR MINIMALE DU MOULE : 330 MM COURSE D’OUVERTURE DU MOULE : 670 MM LUMIÈRE DU JOUR MAXIMALE : 1380 MM COURSE DE L’ÉJECTEUR : 200 MM DIAMÈTRE DE LA VIS : 50 MM PRESSION D’INJECTION : 3032BAR VOLUME DE COURSE : 530CM3 POIDS DE LA GRENAILLE (P/S) : 482GR COMMANDES : NC5 ENTRAÎNEMENT PAR VIS : ÉLECTRIQUE CIRCUIT D’AIR : 4
utilisé
Sumitomo Demag Systec SP 280/630-840 année de fabrication 2014 280 tonnes Pince 2800kn Barre de cravate Dist 630 Unité d’injection 840 Fabriqué à Schwaig, Allemagne 400v 50hz Exworks Amérique du Sud
utilisé
Machine de moulage par injection Sumitomo Demag Systec multi 210/580-430h/200r 2021 Wittmann Robot W822 Z:2500/Y:1400/X:550 2021
utilisé
Sumitomo Demag moulage par injection Systec Wittmann Robot Machine de moulage par injection Sumitomo Demag Systec multi 210/580-430h/200r 2021 Wittmann Robot W822 Z:2500/Y:1400/X:550 2021
utilisé
Machine: DEMAG 50 T INTELEC Year: 2007 Control type: NC4 Number of hours: 25000H Closing Closing force: 50 T Between columns: 330 x 330 mm Tray dimensions: 490 x 500 mm Mini / maxi mold: 150/350 mm Max distance between plates: 410 mm Injection: Screw diameter: 30 mm cm3: 74 Bars: 1400 General: Motor power: 20 kw Heating power: 5 kw Injection weight: 3.3 tonnes Dimensions length: 4.00 m Dimensions width: 1.20 m Dimensions height: 1.80 m Options: Cores: NO Bi metal: YES
utilisé
Machine: DEMAG 650T System 650/1000 YEAR 2008 Year: 2008 Control type: NC4 Number of hours: 38,000 H Closing Closing force: 650T Opening stroke: 930 mm Between columns: 1000 x 9000mm Tray dimensions: 1450 x 1350 mm Mini / maxi mold: 450/950 mm Max distance between plates: 1880 mm Injection: Screw diameter: 95 mm Screw length: 20D cm3: 3367 Bars: 1895 General: Engine power: 74 kw Heating power: 43 kw Closing weight: 25t Injection weight: 80tonnes Dimensions length: 10.10m Dimensions width: 2.50m Dimensions height: 2.60 m Options: Cores: 4 Robot interface: yes Bi metal: yes Others: 8 sequential, 24 zone hot runners, magnetic plate,
utilisé
For sale are 3 Sumitomo Demag IntElect 150/520-410 injection molding machines in good technical condition, complete with hydraulic stations, Witmann Battenfeld W-721 robots (3 axes) and robot work area fences. Stored in a heated room. Unfortunately, there is no way to see the operating time, because... The injection molding machines are not connected to the power supply. Clamping unit 1500. Closing force 1500 kN, holding force 1650 kN, opening stroke max. 495 mm, built-in mold height min/max 275/585 mm, max. the distance between the plates for clamping the mold is 1080 mm, the plates for clamping the molds are 770x770 mm, the clearance between the columns is 520x520 mm, the weight of the mold is max. 1700 kg, which makes the weight of the mold on the movable clamping plate 1150 kg. Ejector. ejector stroke - 125 mm, ejection force 35 kN, ejector return force - 35 kN Injection unit 41 ...
utilisé
SUMITOMO-DEMAG IntElect 210/580 Clamping force : 210 Tons Screw diameter : 35.0 mm Tie bar spacing (H) : 580.0 mm Tie bar spacing (V) : 580.0 mm Shot volume : 178.0 cm³ Shot weight : 158.0 g Pressure on material : 2800 bar Platen length : 880.0 mm Platen width : 850.0 mm Opening of the press : 1265.0 mm Mould size : 690 Length x width x height : 6260.0 mm à 1555.0 mm à 2071.0 mm Weight : 9800.0 kg Worked hours : 26615 hours Hours under power : 32244 hours State excellent At local norms : yes Status : under power max inj stroke -185 mm Operating hours â CPU-32143 ,Drives -26215 ,Heating -26500 Total cycle -16686388 Clamping Force 2100 KN Injection unit 500 Screw diameter 35 mm 400 V / 50 HZ Manufacture year âOctober 2010 Net Weight-9800 kg Injection and Clamp Drives renewed in 2015 The machine is in excellent condit ...