Rotary table, rotary indexing table, dividing head, dividing head -Clamping surface: Ø 250 mm -Groove: 20 mm -Height: 108 mm -Dimensions: 580/350/H120 mm -Weight: 36 kg
Dividing head, spiral milling device, dividing head, tool holder for grinding, drill grinding machine, milling cutter grinding machine, drill grinding holder -Manufacturer: Stankoimport, holder for tool grinding machine -Type: 36642.M7 -swivelling: up to 105° -Mounting: Ø 35 mm / M16 see photos -Dimensions: 150/140/H85 mm -Weight: 3.9 kg
Dividing head, spiral milling device, dividing head, tool holder for grinding, drill grinding machine, milling cutter grinding machine, drill grinding holder -Manufacturer: Stankoimport, holder for tool grinding machine -Type: 36642.M26 -Recording: Dimensions see photos -Dimensions: 110/65/H110 mm -Weight: 2.0 kg
Dividing head, spiral milling device, dividing head, tool holder for grinding, drill grinding machine, milling cutter grinding machine, drill grinding holder -Manufacturer: Stankoimport, holder for tool grinding machine -Type: 36642.M62 -Recording: Dimensions see photos -Dimensions: 195/95/H135 mm -Weight: 2.0 kg
Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Table surface: 500 x 200 mm -4x T slots: 14 mm -Clamping angle: rotatable, swiveling, tiltable -Foot recording: mm -Dimensions: 500/300/H210 mm -Weight: 50.5 kg
Dividing head, spiral milling device, dividing attachment, tool holder for grinding, drill grinding machine, milling cutter grinding machine, drill grinding holder, milling cutter holder -Accessories: for tool grinding machine -Take: SK40 -Tip height: 110 mm -Part head: swivel/rotatable/tiltable -Dimensions: 420/350/H240 mm -Weight: 38 kg
Hydraulic unit, hydraulic pump, hydraulic pump -Max. pressure: 80 bar -Liter flow rate: 18 l/min -Motor: 2.2 kW 950 rpm -Hydraulic tank: 800/650/H280 mm -Dimensions: 1000/650/H1150 mm -Weight: 400 kg
Universal milling head, milling adapter, milling extension, angle milling head -Spare part: from a Stankoimport milling machine -Milling head: with quill -Recording: Exit -Recording: Entrance -completely swiveling -impact head -Equipment -Pitch circle -Dimensions: 1200/800/H300 mm -Weight: 200 kg -Sale only in full
Electric motor, three-phase motor -Power: 0.55 kW -Speed: 1370 rpm -Shaft: Ø 19 mm -Construction: B3 -Protection class: IP 44 -Dimensions: 290/150/H190 mm -Weight: 10.3 kg
Face plate, face plate chuck, four-jaw chuck -Chuck size: Ø 400 mm -Taper holder short taper: 6 -Weight: 66.5 kg
Central lubrication, oil circulation system, single-line pump, central lubrication unit, grease lubrication pump -Grease lubrication pump: hand-operated, made from Stankoimport 3218 guillotine shears -Dimensions: 725/200 / H310 mm -Weight: 11 kg
Bezel, steady rest, lynette -max passage. Ø: 320mm (410mm) -Center height: 500 mm -Drawing: with the photos -Dimensions: 1000/270/H900 mm -Weight: 216 kg
Machine vice, sturdy vice, drill press vice -Machine vice: with MK5 / M20 holder -Type: 36642.M11 -Clamping jaws 80 x 22 mm -Clamping depth: 40 mm -Dimensions: 215/175/H80 mm -Weight: 3.7 kg
Dividing head, dividing head, tool holder for grinding, drill grinding machine, milling cutter grinding machine, drill grinding holder, milling cutter grinding holder Accessories: for tool grinding machine -Recording: MK5 -Peak height: mm -swivel/rotatable/cross table -Dimensions: 400/350/H260 mm -Weight: 36 kg
Hydraulic unit, hydraulic pump, hydraulic pump -Max. pressure: 63 bar -Liter flow rate: 6 l/min -Hydraulic tank: 40 liters -Dimensions: 690/400/H700 mm -Weight: 100 kg
Universal milling head, milling adapter, milling extension, angle milling head -Manufacturer: Stankoimport, universal milling head from milling machine 6P / 2 -Recording output: SK50 -Recording: input gear -Milling head: completely swiveling -Stroke: 72 mm -Electric motor: see photo nameplate -Transport dimensions: 940/560 / H500 mm -Weight: 304 kg
Bezel, steady rest, lynette -Bezel: max. aperture Ø 75 mm -Type: 36642.M44 -Centre height: approx. 125 mm see photos -Dimensions total: 135/310/260 mm -Weight: 7.3 kg
Tailstock, counter bearing for dividing head, dividing head, tailstock for tool grinding machine, cylindrical grinding machine -Tailstock: center height 125 mm -Type: 36642.M3 -Recording: MK2 -Dimensions: see photos -Dimensions: 270/230/H180 mm -Weight: 8.5 kg
Tailstock, counter bearing for dividing head, dividing head, tailstock for tool grinding machine, cylindrical grinding machine -Tailstock: center height 125 mm -Type: 36642.M2 -Recording: MK2 -Dimensions: see photos -Dimensions: 255/200/H170 mm -Weight: 7.1 kg
Dividing head, spiral milling device, dividing head, tool holder for grinding, drill grinding machine, milling cutter grinding machine, drill grinding holder -Manufacturer: Stankoimport, dividing head/tool holder for tool grinding machine -Type: 36642.M1 -Parting head: rotatable/tiltable -Mounting/Dimensions: MK5 see photos -Dimensions: 300/270/H180 mm -Weight: 21.6 kg
Tailstock, counter bearing for dividing head, dividing head, tailstock for tool grinding machine, cylindrical grinding machine -Tailstock: Center height 83-175 mm adjustable/swivelling -Type: 36642.M31 -Dimensions: see photos -Dimensions: 280/220/H270 mm -Weight: 12.1 kg
Dividing head, spiral milling device, dividing head, tool holder for grinding, drill grinding machine, milling cutter grinding machine, drill grinding holder, V-belt drive -Manufacturer: Stankoimport, V-belt drive for tool grinding machine -Type: 36642.M17 -Belt width: 10 mm -Dimensions/recording: see photos -Dimensions: 188/135/H160 mm -Weight: 5.6 kg
Stankoimport 机械压力机/偏心压力机，型号：2225 （СТАНКОИМПОРТ Модель 2225）。材料容量：板材厚度/宽度18/190mm，最大抗拉强 度500MPa。可以预约安排检查
钻孔能力（钢）：50mm，主轴转速：1700rpm，工作范围 45mm-1500mm，工件高度范围：470mm-1500mm，套筒行程：680m m，套筒行程：350mm，主轴锥度：MK5，最大刀具重量： 30kg。机器尺寸X/Y/Z：约2600mm/1100mm/3500mm，重量：约400 0kg。可以进行现场检查
电子元件镗铣床斯坦科进口斯坦科进口 2A622/1600 来自镗铣床斯坦科进口的电子元件 如何 博世3脉冲晶闸管放大器 西门子西科斯塔特 博世 PC200 ZE 与博世爱普罗姆 博世 PC200 E24V 输入 博世 PC200 AR/2A 输出 博世 PC200 NT5V 格夫夫斯 穆尔电子 NLS 100-220/24 上行 110/220 UPC 24V= Mat.Nr 031447-102401 Mat.Nr 031447-102303 特
斯坦科因波特5822M螺纹磨床在苏联制造。该机器用于 削螺纹的过程，以使其具有正确的尺寸和粗糙度。在 此过程中，使用直径为400 mm的砂轮从工件上去除少量余量，在其上形成螺纹形 。 磨床加工最大直径为200 mm，长度为500 mm，重量不超过30 kg的螺纹。根据所选的圆盘，工件的直径可以是3至150 mm（用单线圈盘磨削）或10至120 mm（用多线圈盘磨削）。研磨机的总重量约为5吨。 斯坦科新港5822M螺纹磨床技术数据 - 最大工件直径：200 mm - 用单线圈盘磨削的工件直径：3-150 mm - 多涡旋盘磨削工件直径：10-120 mm - 最大工件长度：500 mm - 最大工件重量：30公斤 - 主轴转速：0.3 - 55 rpm - 砂轮直径：400毫米 - 功率：10.5千瓦 - 机器尺寸：270 厘米 x 230 厘米 - 供应柜尺寸：80 厘米 ...
