SANDRETTO series 9 860/2200 Clamping force: 220 T - 2200 KN Distance between tie rods: 510 X 510 mm Tray dimension: 770 X 770 mm Min / max mold thickness: 210 - 630 mm Opening stroke: 550 mm Injectable volume: 475 cm3 Material pressure: 1815 bars Screw diameter: 50 mm New screw / sheath injection assembly Total machine power: 43.1 KW L/D ratio: 20 Euromap 12 robot interface (Dal maschio Ginko from 2004 possible option) 2 aux cores (PM and PF) Top dosage Weight: 8100 kg Dimensions: 6.13 x 2.08 x 1.59 m
SANDRETTO serie 9 1300/3000 Clamping force : 300 T - 3000 KN Distance between tie bar : 570 X 570 mm Platen dimension : 860 X 860 mm Mould thickness min / max : 210 - 730 mm Opening strocke : 630 mm Injectable volume : 658 cm3 Pressure on material : 1985 bars Screw diameter : 55 mm Total power of the machine : 53,7 KW Rapport L/D : 20 Weight : 11 000 kg Dimensions : 7,04 x 2,22 x 1,82 m
SANDRETTO serie 9 1780/3950 Clamping force : 395 T - 3950 KN Distance between tie bar : 650 x 650 mm Platen dimension : 980 x 980 mm Mould thickness min / max : 200 - 730 mm Opening strocke : 710 mm Injectable volume : 960 cm3 Pressure on material : 1852 bars Screw diameter : 63 mm Total power of the machine : 66,8 KW Rapport L/D : 20 Weight : 15 000 kg Dimensions : 7,80 x 2,31 x 1,93 m Additional option on this machine : Sequential injection
SANDRETTO 9 series 2650/4850 Clamping force: 485 T - 4850 KN Distance between columns: 740 x 740 mm Platform dimensions: 1120 x 1120 mm Min / max mold thickness: 250 - 850 mm Opening stroke: 830 mm Injection volume: 1768 cm3 Material pressure: 1500 bars Screw diameter: 80 mm - 4 hydraulic cores - 1 blow gun - 2 8-way water boxes - Socket panel (4 three-phase, 1 neutral, 1 earth at the rear + 1 three-phase, 1 neutral and 1 earth at the front) Total power of the machine: 85 KW L/D ratio: 20 Weight: 21,500 kg Dimensions: 8.71 x 2.65 x 2.14m
SANDRETTO Serie Nove S sef 2000 220T E860 injection molding machine Series new S sef 2000 220T E860 Screw D50 / 475 cm3 / 1815 bar Between columns: 510 x 510 Opening: 550 Mold thickness: min 210 / max 630 Dim trays: 770 x 770 Total installed power: 44.2 kW Dimensions: Weight: 8100 kg Euromap 12 robot interface Auxiliary cores Top dosage socket table 4-way water box
Manufacturer : Sandretto Model: 300T 860 NOVE S Year of manufacture: 2004 Screw diameter: 50 mm Calculated injection volume: 475 cm³ Length/diameter ratio: 20 L/D Maximum injection rate: 193.2 cm³/s Pressure on the material: 1815 bars Plasticising capacity PS: 32.7 Kg/h Screw Speed: 295 RPM Hydraulic motor torque: 1128 Nm Temperature zones: 3 + 1 N Closing force: 3000 kN Opening stroke: 630 mm Mini /Max Mold Thickness: 210-730 mm Max distance between tray: 30 mm Passage between columns: 570 x 570 mm Dimensions of the trays: 860 x 860 mm Heating power: 30 kW Total installed power: 44.20 kW Oil quantity: 350 l.
SANDRETTO Serie nove T injection molding machine 300T E1300 Screw D63 / 863 cm3 / 1523 bar Between columns: 665 x 665 Aperture: 660 Mold thickness: min 230 / max 730 Dim trays: 980 x 980 Installed power: 55.5 kW Dimensions: 7055 x 2547 x 2160 Weight: 12900 kg Euromap 12 robot interface Auxiliary cores (PF and PM) Top dosage 2 socket boards 10-way stainless steel water box APEX robot
Sandretto injection press series 7 135 tons sandretto series 7 135 ton Injection molding machine
This machine complies with CE standards but is not in working order (hydraulic problem / pump or angular translator / other). Sale in condition The offer includes dismantling, preparation for shipment and loading on truck on 26/09/2022. The machine is equipped with an injection unit, hydraulic core (without robot / manipulator). Type of material used: ABS/PC Closing force: 165 T Opening stroke: 525 mm Distance between columns: 525 x 525 mm Platen size: 760 x 760 mm Min/max mould height: 180/560 mm Injection moulding: Screw diameter: 43 mm Screw length: 20 D Injection volume: 319 cm3 Pressure: 2028 bar General: Motor power: 22 kW Total installed power: 31.9 kW Weight: 7.8 tonnes
