SAFAN machine à vendre

N° Inv. : 4970 Modèle : VS 310-6 Producteur : Safan Création : 1981 Paramètres: Longueur de coupe maximale : 3100 mm Epaisseur maximale de la tôle lors de la découpe : 6 mm Angle de coupe maximum : 2 h Capacité du réservoir d’huile : 150 l Puissance totale requise : 11 kW Butée arrière : 1000 mm Poids de la machine : 6200 kg

Key data: 50 t, 2550 mm, 2050 mm

- Pression : 50 t - Longueur de travail : 2550 mm - Largeur du support : 2050 mm - Capacité de flexion : à 1 m - jusqu’à 10 mm - Encombrement (L x P x H) : 2,9 x 1,6 x 2,3 m - Poids de la machine : 4200 kg - Puissance totale : 4,5 kW - État : très bon Détails peu de course, très bon état, cylindres tous serrés, commande de presse type PSSAS Accessoires Outils de pliage divers, documentation, supports pour outils

Capacité de pliage 80 t Longueur de pliage 2550 mm Gorge 650 mm Course verticale 300 mm

Inv. Numéro : 3861 Type: L-K 120-3100 TSI Producteur: SAFAN Création : 2002 Paramètres: Système de contrôle: SAFAN Force de pressage: 1200 KN Longueur de pliage : 3100 mm course: 180 mm Taille: 4200 x 1650 x 2775 mm Poids de la machine: 8700 kg

Pression: 150 t Largeur de travail: 4300 mm largeur de support de lumière : 3600 mm Extension du stand: 300 mm hauteur maximale d’installation : environ 500/700 mm Vitesse de travail : haut/bas 41 - 65/10 mm/sec Arrêt arrière: 1000 mm Electr. Connexion: 400 V, environ 15 kVA kW Poids: 14 t Exigence d’espace: 4600 x 1950 x 3100 mm

Capacity 2550 x 80 tons X, R, Z1, Z2 and Xdelta CNC controlled Wila New Standard clamping Hydraulic top clamping Machine is expected at the beginning of May (more information on request)

This Safan CNCL-K 170-3100 TS1 bending machine was manufactured in 2002. It boasts a capacity of 170 tons and can handle lengths up to 3100mm. The machine is equipped with a hydraulic tool holder and an advanced 3D collision system to ensure precision and safety during operation. Despite its extensive operating time of 18,923 hours, it remains a reliable asset for intricate bending tasks. Reach out for further details regarding this Safan bending machine.

Capacity 3100 x 6mm Elevated table at the rear Walk-in protection Return to sender Scrap bin option at the front Machine has just arrived, more photos and information on request

Capacity 3100 x 8 mm Equipped with newer touch controls Adjustable backgauge, cutting angle and cutting clearance Elevated table at the rear

Capacity 3100 x 110 tons TS2 CNC control from Safan Y1, Y2, X and R axis CNC controlled CNC Bombing Wila Babs upper clamp Wila 13mm under clamping Includes 1 set of tools

Capacity: 2050 x 40 tons TS1 Touch Screen CNC Control CNC Rear Swing Wila New Standard top clamp 1 set of tools incl.

TS1 CNC control Y1, Y2, X, R, Z1 and Z2 CNC controlled CNC crowning Hydraulic felling table WILA NS Hydraulic top clamping 1 set of tools

Capacity 4300 x 225 tons TS1 CNC Control Y1, Y2, X, R, Z1 and Z1 CNC controlled CNC Bombing Hydraulic Wila NS top clamp

Capacity 2050 x 50 tons Safan TS1 CNC control Manual Wila New Standard clamping X and R axis CNC controlled Includes set of tools

Safan Holland servo-electric press brake type SMK-L-50-2550 -TS1, rb. 1997. Touch screen -LCD Windows, color , graphics, menu in Polish. Bending length: 2550 mm; Stroke: 215 mm; Between columns: 2650 mm; Load: 50 t CNC TS1 control -simulation of 2 D, Polish language - controlled axes Y1; Y2; X; R(pneuma) -10-point table deflection arrow compensation. In the machine a pneumatic die for felting-flattening sheet metal. Tools: Amada. Drive; 9 kW; dimensions: 3500x1800x 2450 mm, weight 5100 kg. Full DTR documentation, also in Polish, a workstation instruction BiHP in Polish.

Hydraulic press brake by SAFAN Lochem Holland, type SK 25-1650. Manually controlled machine. Very easy to use, fast and undemanding machine for a locksmith workshop, it can work in unheated rooms. Angle, pressure, transition from fast mode to bending mode and jump height are set electronically from the desktop. CNC controlled bumper, departure, cycles, programs. Pressure 25 t x working length 1650. Between sides 1250 mm. Machine weight 3.6 tons. Drives 2.5 kW. Amada system tool mounting, punch + multi-grooved matrix tool set - segmented. Full DTR documentation. Occupational health and safety user manual in Polish.

In very good technical condition, the SAFAN Lochem Holland hydraulic press brake rb. 1990/2012, type DNCS 110-3100. Press rebuilt by the manufacturer in 2012. CNC-controlled synchronous machine DNCS ARA- controlled axes- Y1; Y2; R; Crow - Wila table deflection compensation controlled by CNC. In addition, a hydraulic matrix for sheet metal folding-flattening, type DT005, controlled by CNC. The machine is equipped with an automatic sheet support system during bending and flattening at 2 heights. Hydraulic punch clamping. 4 bumper fingers with precision. Pressure 110 t x working length 3100. Between the sides 2600 mm. Machine weight 8.3 t. Drives 7.5 kW. Protection of the working area with infrared. A set of Amada / Trumpf system tools for the entire length of the machine, die V = 8 mm / angle 28 degrees and punch 28 degrees / h = 105 mm. This enables the 6 mm long window sill to b ...

Hydraulic guillotine for cutting sheet metal by Safan the Netherlands, type VS 310-3, 3100 mm x 3 mm (ST40). The machine has a quickly changing knife gap with thickness reading, and a hydraulically variable knife angle of 0.5 -2 degrees. 5.5 kW motor. The weight of the machine is 4.2 tons. The machine is fast and the number of cuts is equal to that of mechanical ones. CNC electric bumpers with a position transmitter with readout, bumper travel 1050 mm. Electrically adjustable cutting length in the range of 75-3100 mm. A system for magnetically supporting large sheets of metal while cutting at the rear of the machine. Support 2000 mm angle bracket, to support sheet metal at the front of the machine. Light line enabling line cutting. Original DTR documentation.

Press brake with servo-electric drive Safan Holland type SMK-P-50-2550 -TS1, rb. 1999. Touch screen - LCD Windows, color, graphics, menu in Polish. Bending length: 2550 mm; Stroke: 215 mm; Between columns: 2650 mm; Pressure: 50 t CNC TS1 control - 2D simulation, language Polish - Y1 controlled axes; Y2; X; R; Z1; Z2 -10 point compensation of the table deflection arrow. Infrared barriers are installed in the machine to protect the working area. Tools: Trumpf-Wila - set. Drive; 9 kW; dimensions: 3500x1800x 2450 mm, weight 5500 kg. Full O&M documentation, also in Polish, BiHP workstation manual in Polish.

Hydraulic press brake from SAFAN Lochem Holland rb in very good technical condition. 1997/ CNC control new 2023, type CNCL 110-4300 TS1. CNC-controlled synchronous machine TS1-Windows 2023, color, bending simulation, touch screen, controlled axes - Y1; Y2; X; R. New control replaced in 2023. Additionally, a hydraulic die for folding and flattening sheet metal, type DT005, CNC-controlled. Hydraulic punch mounting. 4 bumper fingers with precision controls. Pressure 110 t x working length 4300. Stroke: 180 mm. Between sides 3700 mm. Machine weight 11.7 tons. Drives 7.5 kW. A set of Amada/Trumpf system tools for the entire length of the machine, matrix V = 8 mm / angle 28 degrees and punch 28 degrees / h = 105 mm. This allows you to bend and flatten a 6 mm long window sill. Full DTR documentation. Occupational health and safety user manual in Polish.

Hydraulic guillotine for cutting sheet metal by Safan the Netherlands, type VS 16-310, 3100 mm x 16 mm (ST40) The machine has a quickly changing gap between the knives with thickness reading, and a hydraulically variable knife angle of 0.5 -3 degrees. 21 pieces of sheet metal holders. 18.5 kW engine. Weight 12.5 t. CNC bumpers with reading and setting device, bumper travel up to 1200 mm. 2 supports to hold sheets of metal at the front of the machine, and a ruler for cutting at a 90-degree angle. Light line on the material, lighting, central lubrication. electronic cutting length adjustment 10-3100 mm. Single or continuous cutting with adjustable intervals between strokes. Very fast guillotine. Knives 90% new, cutting material from 0.5 to 16 mm. Original OHS documentation and occupational health and safety manual in Polish.

Touch screen - Windows, color, graphics, menu in Polish. Bending length: 1250 mm; Stroke: 115 mm; Between columns: 1250 mm; Pressure: 25 t CNC TS1 control - 2D simulation, language Polish - Y1 controlled axes; Y2; X; R(pneumatic) -10 point compensation of the table deflection arrow. Tools: Amada-Set of tools. Drive; 6 kW; dimensions: 1900x1800x 2050 mm, weight 2250 kg. Full O&M documentation, also in Polish, BiHP workstation manual in Polish.

Hydraulic sheet metal cutting guillotine from Safan Netherlands type VS306, 3100 mm x 6 mm (ST40). The machine has a variable inter-knife gap, and a hydraulically variable knife angle of 0,5 -2 deg. 11 kW motor. The weight of the machine is 6,3 t. The machine is fast. Departure of the bumper 1050 mm. Electrically adjustable cutting length in the range of 10-3100 mm. 2 supports for supporting sheet metal at the front of the machine, gauge of 2500 mm, for cutting at an angle of 90 degrees. Light dash for cutting along the line. Original DTR documentation and safety instructions in Polish.

Hydraulic sheet metal cutting guillotine from Safan Netherlands type HVR 6-310, 3100 mm x 6 mm (ST40), rb. 1999. The machine is fully CNC controlled by Safan. The machine has a variable inter-knife gap, and a hydraulically variable knife angle of 0,5 -2 st, set after entering the thickness and hardness of the material. 11 kW motor. The weight of the machine is 6.3 t. The machine is b. fast, the number of cuts is equal to mechanical. Electric bumpers with reading, bumper departure 1050 mm. Electrically adjustable cutting length in the range of 10-3100 mm. 3 supports to support sheets at the front of the machine, plus a gauge of 2500 mm, for cutting at 90 degrees. Light dash for cutting along a line. Original DTR documentation and safety instructions in Polish. Riding table at the rear of the machine. Protection of the working space with infrared. The machine structurally adapted ...

Hydraulic press brake by SAFAN Lochem Holland rb.1992 type UCK 80-3150. NC controlled machine with controlled axes - Y1; Y2 Control from the desktop: pressure, bending angle, return and switch to working mode Pressure 80 t x working length 3150 mm. Between sides 2650 mm. Machine weight 6 tons. Drives 7.5 kW. Machine without tools Full DTR documentation. Occupational health and safety user manual in Polish. The machine meets the requirements of the Tools Directive.

Hydraulic guillotine for cutting sheet metal by Safan the Netherlands, type VS 255-10, 2550 mm x 10 mm (ST40). The machine has a quickly changing knife gap with thickness reading, and a hydraulically variable knife angle of 0.5 -2 degrees. 11 kW motor. Machine weight 8.2 tons. NC electric bumper with position transmitter with readout, bumper travel 1050 mm. Electrically adjustable cutting length in the range of 30-2550 mm. 2 x supports for holding sheets of metal at the front of the machine, plus a 1500 mm ruler for cutting at an angle of 90 degrees. Light line enabling line cutting. The knives are sharp, the machine cuts copier paper. Original DTR documentation

Sale guillotine shears (guillotine) Safan B-Shear 310-6 2013 release in excellent condition, there are all documents on diagnostics and maintenance work performed. Running hours 12 674

3 axes: Y1 / Y2 / X touchscreen control Willa upper tooling Capacity: 40 ton x 2050 mm Backgauge: CNC Control: TS Passage between uprights: 2050 mm Max stroke: 115 mm Max distance between table -- ram: 515 mm Locking speed: 90 mm/sec Working speed: 20 mm/sec Returning speed: 90 mm/sec Electric motor (power): 13,5 kW Length: 2900 mm Depth: 1850 mm Height: 2620 mm Weight: 3150 kg

Hydraulic pump, hydraulic unit, hydraulic container, hydraulic tank -Manufacturer: Safan, hydraulic container from press brake type UC 110-3100 -Level indicator: sight glass -Total dimensions: 1950/540/H485 mm -Weight: 69 kg

Hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, hydraulic cylinder press brake -Manufacturer: Safan, 2 hydraulic cylinders from press brake type UC 110-3100 -Piston rod: Ø 150 mm -Stroke: 180mm -Piston: with return spring -Add-on parts/directional valves: see photos -Price/tax: complete -Dimensions: 640/225/220 mm/piece -Weight: 270kg/piece