A mass finishing system with dosing equipment is offered. Operator panel on the control cabinet. Equipped with dosing unit, control cabinet, safety enclosure, stairs and conveyor chute. Inspection possible by prior arrangement.
一台仅运行5000小时的罗斯勒离心机被出售。 价格是净价加上增值税和VHB 可用的装卸设施 物品位置 巴伐利亚菲尔
配备Rösler圆形振动精加工机。工作碗容积：620升，碗 外径：1650毫米，工作通道宽度：430毫米，转速：1485 /分钟，重量：约2500公斤。文档可查。现场检查是可 的
出售的是一台Rösler离心机，例如用于平滑研磨。 技术数据在图中。 机器已使用且功能齐全 系统可以且应当现场检查，不包括保修或保证。 文章位置纽伦堡 增值税是可扣除的 所有信息均无保
总容积：120升，最大旋转元件：2560毫米，工作容器直 径：640毫米，排水高度筛网机：880毫米，连接负载：1 1千瓦，驱动功率旋转台4千瓦，长度：2620毫米，宽度 2620毫米，高度：2320毫米。现场检查是可能的
Abrasive bodies, ceramic abrasive bodies, polishing bodies for rotary vibrators, vibratory finishing systems, vibratory finishing rotary vibrators, trowal systems, continuous vibrators -Manufacturer: Rösler, ceramic grinding wheel type RS 40/40 2 bags -Content: 25 kg/bag -Price/delivery: complete -Transport dimension.: 400/380/H400 mm -Total weight: 50 kg
Abrasive bodies, ceramic abrasive bodies, polishing bodies for rotary vibrators, vibratory finishing systems, vibratory finishing rotary vibrators, trowal systems, continuous vibrators -Condition: used -Manufacturer: Rösler, ceramic grinders 40/45/45 mm 1 box -Content: 71 kg -Price/delivery: complete -Transport dimension.: 600/400/H220 mm -Total weight: 72 kg
Rösler 提供完整的振动精加工系统，由多个组件组成。1） 槽式系统 Rösler R 550/4600 DA，连接负载：15kW，重量：约 6000kg。2） 水处理离心机 Rösler Z 600 ASS-1-Turbo。3） 输送带 Rösler R 360/4100 FB/S，输送带长度：8220mm，宽度：379mm，重量：约 400kg。4）输送带Rösler R 360/2800 FB/T，输送带长度：5650mm，宽度：379mm，重量：230kg。5 卸料带 Rösler R 600/2000 FB/T，皮带长度：4050mm，宽度：620mm，重量：约 310kg。提供文档。可以进行现场检查
A complete Rösler mass finishing machine is available. 1) Central mass finishing machine (centrifugal system) Rösler RotoMatic R 280/24 SE, year of construction: 2008, connected load: 18kW, weight: approx. 7500kg. 2) Rotary dryer Rösler RT 550 EURO-So., year of construction: 2008, connected load: 8.9kW, weight: approx. 1050kg. 3) Rösler R 290/4500 FB/T conveyor belt, year of manufacture: 2008, belt width: 290mm, belt length: 4900mm, connected load: 0.55kW, weight: approx. 430kg. 4) Buffer chute Rösler R 16/6/4 PR, year of construction: 2008, connected load: 4kW, weight: approx. 570kg. 5) Feeding unit Rösler BE 200 K-So., year of manufacture: 2008, connected load: 1.1kW, weight: approx. 200kg. Documentation available. On-site inspection is possible.
Belt washing system Rösler C20.30/0.6/B/SOP/P/SOP,, Year of manufacture: 2016, Serial No.: 72441,, Stainless steel, for container dimensions 400 x 600 mm, consists of the following work zones:, washing 1, blow off 1, washing 2, blow-off 2, Cooling with ambient air, The workpieces pass through the washing zones of the system continuously on a chain conveyor system., The drive is via a gear motor with speed control., The surface of the workpieces is first sprayed and cleaned on all sides using nozzles., The workpiece carriers then pass through the blow-off zone, where the workpieces are blown off with filtered ambient air via special nozzles., Analogously, the workpieces pass through another washing and blow-off zone (washing 2 + blow-off 2), To ensure the cleanliness of the workpieces and the washing liquid, each washing zone is equipped with a filter system., To improve washing and dryi ...
存储旋转台，使用旋转存储工作台 制造商： 罗斯勒上下游技术有限公司 型号： R 1540 ST 工作台直径约 1500 mm 建设年份： 2003 总尺寸： 约 2600 x 2100 x 1000 mm 存储旋转工作台用于旋转对称部件的存储、缓冲、分 和单次进料。 它们通常用于振动研磨系统。 技术数据，信息和价格以及保留的先前销售中的更改 错误
二手
槽带连续抛丸机 制造商： Rösler 滚筒直径：400mm 最大工件长度：700/1000mm 单件重量最大 kg： 12 kg 载重量：100kg 爆破轮： 4 pieces á 7.5 kW 装机功率 ： 45kW 保修：由 DECK Sarl 调试时提供 6 个月的功能和保修保证。 未来 10 年的备件供应 德勒维布 可选：运送到您的工厂 主管组装/调试/培训
charge load: 620 Liter : 1.700 mm tank diameter / tank height: 1.550 / 600 mm : 450 mm motor capacity: 4,5 / 7,5 kW motor speeds:: 900 / 1.485 U/min voltage: 400 V total power requirement: 8,5 kW weight of the machine ca.: 1,6 t dimensions of the machine ca.: 2,00 x 1,70 x 1,50 m Soundproofing cover bracket: 3,30 x 0,60 x 0,40 m Finishing machine - Serial-No.: 36225 / 05 - Machine ON: 6.469 h - Pneumatic separating flap - Timer - Pneumatic soundproof cover The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
charge load: 620 liter Outer dia. of work tank: 1695 mm tank length (expanded): 3800 mm width of working tank: 430 mm speeds: 900 - 1485 U/min voltage: 400 V total connected load: 7,5 kW weight of the machine ca.: 1600 kg dimensions of the machine ca.: 1,80 x 1,70 x 1,30 m - Serial No.: 18585/98-03 - with continously variable motor speed - with pneumatic separation flap The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
