подкатегории
(уровень третий категории)
Производитель:
(Категория: 109)
Machine vise, sturdy vise, drill vise-Jaw width: 210 x 65 mm-Clamping depth: 410 mm-Dimensions: 800/345/H170 mm-Weight: 87 kg
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws-Top jaws: Jaw set for three-jaw lathe chucks, soft-Jaw width: 24 mm-Dimensions: see photo technical. drawing-Total dimensions: 95/73/H68 mm-Total weight: 2,4 kg
Three-jaw chuck, three-jaw lathe chuck-Chuck size: Ø 250 mm-Throughout: Ø 80 mm-Short taper: 6-Weight: 28 kg
Counter holder, counter bearing, bearing block, pillow block, bearing for milling machine -Dovetail: 125 by 160 mm 25 mm high -Drawing with the photos -Dimensions: 300/110/H205 mm -Weight: 14 kg
Collet holder, tool holder, tool holder, milling holder, milling tool, short-shaft system-Manufacturer: DEPO, milling mount SK50-Type: 100 5 77-Milling tool holder: conical, Ø 34/24 mm M16-Dimension total Ø97x385mm-Weight: 5.9 kg
Rubber mat, rubber sheet, rubber stop, stop plate, rubber cover, rubber pad, rubber mat -Rubber cover: Rubber pad -Thickness: 9 mm -Length: 1000 mm -Width: 200 mm -Weight: 2.4 kg
Straightedge, straightening rail, steel ruler, assembly ruler, assembly straightedge, straightedge-Assembly ruler: made of profile steel-Type: DIN 874 Normal-Dimensions: 503/41/H80 mm-Weight: 9.4 kg
Clamping plate, marking-spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate, marking plate, straightening table -Clamping plate: on solid base frame -Clamping surface: 2100 x 1200 mm -Table height: 740 mm -Plate thickness: 130 mm -Transport dimensions: 2100/1200/H740 mm -Weight: 2400 kg
Three-jaw chuck, three-jaw lathe chuck -without: interchangeable jaws -Mouth size: Ø 250 mm -Recess diameter: 205 mm -Bolt circle: 226 mm -Weight: 22 kg
Drying oven, drying cabinet, electrode oven, chamber dryer oven, preheating oven, electrode re-drying, electrode cabinet, electrode dryer, welding powder dryer, welding electrode stabilizing oven -Manufacturer: Gullco, Drying oven electrode dryer welding powder dryer type 125-220 -Nominal temperature: up to 38° - 288°C -Usable space: WDH 250/480/200 mm -Voltage: 220 V -Power: 1000 W -Dimensions: 385/365/H695 mm -Weight: 24.4 kg
Wedge bar chuck, three-jaw chuck, three-jaw lathe chuck, power chuck, hydraulic chuck -Mouth size: Ø 250 mm -Cone: Ø 94 mm -Thread: M20 -Gradient: 2.5 mm -Weight: 33.3 kg
Three-jaw chuck, three-jaw lathe chuck -Mouth size: Ø 250 mm -Passage: Ø 80 mm -Weight: 19 kg
Clamping plate, plate field, welding table, welding table, plate boring mill, straightening plate, tool holder-with: holes-Width: 400 mm-Length: 500 mm-Height: 30 mm-Weight: 45 kg
Chuck flange, flange mount, lathe chuck flange, driver flange -Chuck flange: for three-jaw chuck, four-jaw chuck, face plate -External: O 270 x 110 mm -Inside: O 240 x 81 mm -Mount: Camlock short taper 8 (139 mm) -Bolt circle: O 171 mm -Number: 1x disks available -Price per piece -Weight: 16.6 kg
Thread cutter, thread cutting machine, thread drilling machine -Integrated reversing gearbox: with rapid return -Nominal input: 230 watts -Max. cutting capacity: M6 -Connection: 230 volts -Weight: 2.5 kg
Thread cutting machine, pipe thread cutter-Manufacturer: Ridgid, thread cutting machine type 535-Pipe size: 1/8 to 2 inches-Spindle bore: Ø 64 mm-Operating voltage: 230 volts-Dimensions: 1080/700/H1140 mm-Weight: 128 kg
Tailstock, counter bearing for dividing head, dividing head -Peak height: 255 mm -Recording: MK4 -Dimensions: see drawing in the images -Dimensions: 600/220/H410 mm -Weight: 84 kg
Broaching tool, broaching needle, special tool, grooving tool, keyway machine, keyway machine, keyway tool, keyway broaching needle -Manufacturer: SWZ, broaching needle -Type: SW 22 F8x28,35 RL 20-50 mm -Article No.: 24 3039 174 208 020 TKO -Width: square 22 mm / see photos -Quantity: 2 pieces available -Price per piece -Dimensions total: 920/22/22 mm -Weight: 2.5 kg/piece
Tool holder, milling holder, milling tool-8x recordings: SK40-Adapter-Take: SK40-Tool holder: MK3-Bore chucks, flat chucks, reducing sleeves, cutter heads, shell end mills, spindle tools-Total length: mm-Sale: only complete-Weight: 9 kg
rubber mat, rubber plate, stop rubber, stop plate, rubber cover, rubber pad, rubber mat-Rubber cover: rubber pad-Thickness: 9 mm-Length: 1985 mm-Width: 200 mm-Weight: 5.1 kg
Pipe sealing bag, leak sealing bag, sealing plate, pipe sealing-Pipe sealing cushions-Outer/inner diameter: 200/125 mm-Height: 58 mm-Number: 9x pillows available-Price: per piece-Weight: 2.9 kg/piece
Pipe sealing cushions, leak sealing cushions, sealing plates, pipe seals, breakthrough seals-Pipe sealing cushions-Outside/Inside: Ø 300/215 mm-Height: 20 mm-Hole circle: Ø 253/10 mm-Delivery of: steel/stainless steel cover plates possible-Number: 71x pillows available-Price: per piece-Minimum purchase: 3 pieces-Weight: 0.8 kg/piece
Tool holder, tool holder, milling holder, milling tool, chuck, milling cutter holder-Manufacturer: Eroglu, cutter holder with coolant channel in original packaging-Type: HSK 63-12-80-K-Art.No.: A63.04.12.K-Transport dimensions. 470/100/H95mm-Weight: 1.2 kg
Three-jaw chuck, 3-jaw chuck-Chuck size: Ø 200 mm-Passage: Ø 55 mm-Weight: 14 kg
Machine vise, sturdy vise, drill vise-Vise: rotatable-Jaw width: 200 x 60 mm-Clamping depth: 250 mm-Dimensions: 520/280/H195 mm-Weight: 73 kg
Machine vice, stable vice, drill press vice -Vice: rotatable -Jaw width: 200 x 55 mm -Clamping depth: max. 170 mm -Dimensions: 600/270/H210mm -Weight: 81 kg
marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube, prism block-Marking prism: for marking plate, clamping plate, straightening bench ...-Dimensions: 150/50/H130 mm-Weight: 4.5 kg
Tailstock, counter bearing for dividing head, dividing head -Height: adjustable -Recording: Top -Dimensions: 245/280/H200 mm -Weight: 28 kg
Tapping chuck, thread chuck, tapping chuck, thread cutting attachment-Manufacturer: Fahrion, thread cutting attachment GA 30-Shaft: MK3-Reversing gear: integrated quick return, slip clutch-Clamping diameter: max 23 mm-Dimensions: 230/125/H80 mm-Weight: 6.3 kg
Steel products, flat steel, round steel, bar steel, tubes, profile tubes, square tubes, rectangular tubes, sheets, shaped steel, wide flange beams, narrow flange beams, plates, structural steel, rolled steel, drawn steel, I-beams-For our customers in the area, we offer material cut-to-size and contract manufacturing and a large selection of materials in stock-Sheets, pipes, profiles, bars and sections made of steel, stainless steel and non-ferrous metals such as aluminum, brass and gunmetal
