подкатегории
(уровень третий категории)
Производитель:
(Категория: 109)
Gauge block box, gauge blocks, parallel gauge blocks, test pin set, test pins, plug gauge-Manufacturer: Cary, plug gauge test pin set: 3.01 - 3.49 mm-Content / nominal dimensions: see photos-Dimension box: 135/85 / H60 mm-Weight: 0.3 kg
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set-Top jaws: jaw set for three-jaw lathe chucks, hard-Jaw width: 20 mm-Dimensions: 70/60 / H50 mm-Total weight: 1.0 kg
Bezel, stick, lynette-Bottom parts: different sizes-Price: on request-Number: 4x bezel lower parts available-Price: per piece-Dimensions:-Weight: kg
Key bar chuck, power chuck, three-jaw chuck, three-jaw lathe chuck -Manufacturer: Röhm, three-jaw chuck type DURO-S chuck size Ø 160 mm -Passage: Ø 42 mm -Bolt circle: Ø 83 mm -Mounting: Short taper 4 / cone 56 - 62 mm short taper flange with Camlock fastening -Dimensions: Ø160 x 115 mm -Total weight: 9.6 kg
tool holder, milling holder, milling tool, long milling arbor, arbor holder, cutter head holder, cutter head holder-Milling holder: cutter head holder SK50-Mounting: Ø 22 mm / M10-Dimensions: see photos-Dimensions: Ø 98 x 554 mm-Weight: 19.3 kg
Tool holder, milling holder, milling tool, long milling arbor, attachment holder-Milling holder: SK40 holder-Cutter holder. Ø 10 mm-Number: 2x recording available-Price: per piece-Dimensions: Ø 64 x 170 mm-Weight: 1.3 kg/piece
Counter holder, counter bearing, bearing block, pillow block, bearing for milling machine-Swallowtail: 74 by 88 mm 14 mm high-Bore: 56 mm-Drawing with the photos-Dimensions: 100/140/H165 mm-Weight: 5.3 kg
Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet, revolving drawer cabinet -Tool cabinet: Vidmar rotating drawer cabinet, sturdy design -Drawers: 5 rotating drawers, division/height see photos / height adjustable in hole pattern -lockable: without bowl -Dimensions: W 725/480/H 1000 mm -Weight: 98 kg
Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck-Chuck size: Ø 190 mm-Through hole: Ø 57 mm-Weight: 19 kg
Pipe sealing cushions, leak sealing cushions, sealing plates, pipe seals, breakthrough seals-Pipe sealing cushions-Outside/Inside: Ø 123/80 mm-Height: 20 mm-Hole circle: Ø 100/7 mm-Delivery of: steel/stainless steel cover plates possible-Number: 120x pillows available-Price: per piece-Minimum order quantity: 5 pcs-Weight: 0.2 kg/piece
revolving center, revolving center point, revolving Morse taper, revolving center point, revolving lathe center, center center-Manufacturer: Röhm, rotating centering tip type 110 H-Barrel tip: shaft-mounted-Recording: MK5-Quantity: 1x centering tip available-Price per piece-Dimensions: Ø 90/257 mm-Weight: 4.4 kg
Thread cutting chuck, thread chuck, tapping chuck, milling tool, thread cutting attachment, thread cutting quick-change chuck-Tapping chuck: Tapping quick-change chuck-Type: M12 Ø9X 7-Total dimensions: Ø50 x 71 mm-Weight: 0.5 kg
Chuck flange, flange mount, lathe chuck flange, drive flange -Muck flange for: three-jaw chucks, four-jaw chucks, faceplates -Outer diameter: 270 -Cone: Ø 139.7 mm -Camlock recording -Weight: 13 kg
collet chuck, tool holder, tool holder, milling chuck, milling tool-Collet holder: SK50-Clamping sleeve: Ø31 mm-Dimensions: Ø 88 x 200 mm-Weight: 3.0 kg
Chuck flange, flange mount, lathe chuck flange, driving flange-Chuck flange for: drive heart, three-jaw chuck, four-jaw chuck, face plate-Outer: Ø 210 mm-Short taper: 5 (82.5 mm)-Number: 2x discs available-Price: per piece-Weight: 5 kg
Radius cutter, milling cutter -Finish cutter -Various: Diameter -Various: Manufacturers -Type: HSS and SS Quantity: 16 pieces -Sale: only complete set -Weight: 9 kg
: neu : ca. 4 Wochen ab Auftragse : Italien : 3620 €: 38 mm: 245 mm: 300 mm: 320 mm: 23 kg: 19 cm³: 38 x 1,5 mm: 38 x 1,5 mm: 35 x 3 mm: 30 x 2 mm: 35 x 1,5 mm: 42 x 1,5 mm: 42 x 1,5 mm: 50 x 2 mm: 50 x 2 mm: 50 x 4 mm: 20 mm: 10 x 25 mm: 25 x 20 (stehend), 25 x 1 mm: 180 mm: 36 mm: 10 mm: 2,8 U/min: 0.9 kWdigital adjustment of the bending angle from 0 - 180 °single phase motor 220V / 900Welectric engine brakeindicator light for indicating overloadbasement made of cast iron, suitable for mounting a tripod (tripod not included)90° bend in 6 secondsfoot pedalwithout toolsOPTIONAL EQUIPMENT:tripod € 330,-The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Pipe sealing cushions, leak sealing cushions, sealing plate, pipe sealing, breakthrough sealing-Pipe sealing cushions-Outer diameter: 248 mm-Height: 20 mm-Hole circle: Ø 200/7 mm-Delivery of: steel/stainless steel cover plates possible-Number: 10x pillows available-Price: per piece-Weight: 1.1 kg/piece
End mill, indexable insert milling cutter, hedgehog cutter, tool holder, milling holder, milling tool -Diameter: 80 mm -Milling height: 75 mm -Recording: SK50 -Manufacturer: Hoffmann -Type: KRE80-321 -Order No.: 229.810.00 -Weight: 7.8 kg
Clamping plate with T-slots, plate field, welding table, welding table, plate boring machine, T-slot plate -Welding table: clamping plate with T-slots on a solid base frame with vice -Bottom: with cooling fins -Table surface: 2010 x 650 mm -Groove width: 19 mm -Groove spacing: 130 mm -Overall dimensions: 3170/860/H1060 mm -Weight: 880 kg
Roll jaws, floating central jaws, pull-down jaws, machine vice jaws, clamping jaws-1 piece: pull-down jaw-Interior dimensions: 140/160 mm-Groove width: 8 mm-Dimensions: 200/30/H100 mm-Weight: 3.2 kg
Underfloor circular saw, crosscut saw, pull saw, chop saw, sliding table saw, table saw, circular saw, precision circular saw-Manufacturer: Rapid, table saw saw unit: 45° pivotable-Type: Pk 100-Motor power: 2.5 kW / 2850 rpm-Saw blade: Ø 175 mm, (max. Ø 300 mm)-Cutting height 37 mm with saw blade Ø 175 mm (max. ca. 100 mm)-Cutting width: 350 mm-Miter cut: up to 45°-Dimensions 940/860/H1390 mm-Weight: 162 kg
Three-jaw chuck, three-jaw lathe chuck-Chuck size: Ø 200 mm-Weight: 18 kg
Quick-change chuck, quick-change holder, quick-change head, quick-change drill holder, milling holder, quick-change insert, collet chuck, reducing sleeves, clip-on holder-Quick-change chuck: Recording: MK3 / 28 mm-Dimensions: see photos-Quantity: 1x quick-change chuck available-Dimensions: Ø 58 x 190 mm-Weight: 1.1 kg
Bezel, steady rest, lynette -max. passage: Ø 210 mm -Centre height: 390 mm -technical drawing: in the photos -Dimensions: 600/125/H625 mm -Weight: 53.5 kg
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws-Top jaws: Jaw set for three-jaw lathe chuck, hard-Jaw width: 20 mm-Dimensions: see photo technical drawing-Total dimensions: 90/60/H62 mm-Total weight: 1,6 kg
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws -Manufacturer: Fabryka Przyrzadow, 3-piece soft top jaw set -Type: PUTm-M 200 -Width: 25 mm -Number: 5x jaw sets available -Price per piece -Dimensions carton: 80/90 / H75 mm -Total weight: 2.3 kg / set
Clamping plate, welding table, welding table, straightening plate -Width: 1760 mm -Length: 2400 mm -Height: 840 mm -partly with threaded holes -Plate thickness: 50 mm -with supporting ribs -Transport dimensions: 1760/2400/H840 mm -Weight: 2000 kg
Quick-change tool post, tool post head, quick-change tool post, quick-change drill bit post, quick-change boring bar post, quick-change turning tool post, tool post-Quick-change tool holder: quick-change turning tool holder-Recording dimensions: see photos-Cutting tool holder: Ø 31 mm MK4-Dimensions: 135/55/H125 mm-Weight: 2.7 kg
Tool holder, milling holder, milling tool, cutter head -Take: SK40 3 pieces -Sizes: see pictures -Price: complete -Dimension box: 320/110/H150 mm -Weight: 3.5 kg
