подкатегории
(уровень третий категории)
Производитель:
(Категория: 109)
Tialn coated/ various lengths/ shaft 10 mm
Shaft 12 mm/ coated/ 3 x D and 5 x D/ various diameters 10.2 to 12 mm/
Unused Rated Input Voltage: 1P AC380V ±15% 50/60Hz Rated input current: 29A Rated Input Power: 19KVA Open circuit voltage: 280V Output current setting: 30-120A Rated output voltage: 128V Cyclic continuous factor: 60% Efficiency: 80% Insulation class: F Protection class: IP21 Non-contact arc ignition Weight: 38KG Dimensions: 690 x 335 x 575
Possible to efficiently cut steel up to 25 mm thick, even with heavy materials. A sharp and precise cut, without deformation or damage to the material. Supply voltage: 380 V Rated power: 19 kVA Rated current: 29 A Open circuit voltage: 280 V Output Current Setting: 30-120 A Rated output voltage: 128 V Maximum cutting thickness: 45 mm unused and in the original packaging
2 pieces MSSE32L90-3225N/ 8 pieces MSSE32L00-3325N/ unused and in original packaging
Crane rails for overhead cranes in industrial halls - 6 Pieces - Total length dimensions 29.6 meters - With guides and stops on it - Can be loaded by seller with forklift
- Punching capacity: Ø 27 mm × 13 mm. - Throat depth: 500 – 750 mm. - Punch section: 1110 mm² Including various accessories.
EBU 80 – Single-column eccentric press – Year of construction 1971 • Manufacturer: EBU Pressen • Machine type: Single-column eccentric press • Type: EBU 80 • Year of construction: 1971 • Machine number: 293 • Press force: 80 t (at 30° before subtitles) • Adjustable stroke: 12–60 mm • Plunger adjustment: 80 mm • Plunger stroke rate: 37–147 strokes/min • Weight: approx. 5,200 kg Dimensions (approx.) • Height: 2,500 mm • Width: 1,500 mm • Depth: 1,800 mm Equipment & Design • Mechanical eccentric press in heavy casting design • Large work table with T-slots • Adjustable stroke • Pneumatic unit with pressure regulator and pressure gauge • Side-mounted control cabinet with controls • Flywheel with protective cover • Tool holder on the ram Condition • Used machine • Signs of wear and tear due to age and use • Paint chipping and dirt ...
Rated Input Voltage: 1P AC220V ±15% 50/60Hz Rated input current: 25A Rated input power: 5.5 KVA Open circuit voltage: 243V Output Current Setting: 20-40A Rated output voltage: 96V Cyclic Duration Factor: 60% Efficiency: 70% Insulation class: F Protection class: IP21 Arc discharge by contact
Rated Input Voltage: 3P AC380V ±15% 50/60Hz Rated duty cycle: 40% Efficiency: 85% Insulation class: F Protection class: IP21 Weight: 43 kg Insulation value: F Protection value: IP21 MIG TIG MMA - Input power (KVA) 13.8 10.5 11.8 - Input current (A) 21 16 18 - No-load voltage (V) 80V 80V 80V - Output current (A) 40-350 10-350 30-300 - Output voltage (V) 31.5 24 32
Shrinkfit/ 12 to 20 mm/ unused and in original packaging
10 pcs quick-clamping bolts for 28mm systemClamping range from 5 to 50mmNumber 10 pcs. Clamping range 15 - 50 mmHole diameter 28 mmWeight 10 kgDimensions L x W x H 0.3 x 0.3 x 0.2 m Condition: never used / new (5)
Galvanized steel; 40mm x 40mm; length approx. 4500mm
Clamping plate1400 x 1200mmHeight 200mmGroove 38 x 38mmsee pictures
Pallet size 630 x 630 mm; 60 tool magazine; Please note! Tools in the warehouse are not included in this lot!
Welding turntable with- quick-release chuck 65mm- foot switch- tilting/swivelling by hand- speed infinitely adjustableTable diameter 180 mmTable load horizontal 10 KgTable load vertical 5 KgChuck diameter 65 mmSpeed 2 - 10 rpmSwivel range 90 degreesTilt adjustment: manualConnection voltage 230 VMachine weight approx. 15 KgSpace requirement approx. 400 x 400 x 400 mm Condition: never used / new (5)
190 € 
