Прессы для гибки (65)

Технические данные: 4 изгиба роликов максимальная дальность изгиба: 3000 мм внешняя панель коммутатора и управления, а также счетчик

pressure: 28 tstroke: 180 mmtable-size: 300 x 550 mmdiameter of piston: 130 mmwork speed: min. 2 m/secwork speed: max. 9,8 m/secreturn speed: 20 mm/secMax. pressure: 200 barweight of the machine ca.: 0,65 ttotal power requirement: 4 kWdimensions of the machine ca.: 1,15 x 0,75 x 1,1 m• The horizontal bending and straightening press from Profi Press is a universal one Hydraulic press specially designed for performing bending, profiling and Straightening work is designed. The applications of the machine are different and depend on the accessories that are on the work table, theTool holder and are installed in the holes and pin holes.• The HB-28 model is used for light bending measurements on the work tableequipped with an angle scale, and the press can also be equipped with toolsare supplied (for example block punching) that are placed on the tool holderCan be assembled, as well as to ...

engine: 2,8 KWweight of the machine ca.: 320 kgdimensions of the machine ca.: 86 x 90 x 85 cmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Wochen ab Auftragse : Italien : 15330 €: 294.34 €: 22 to: 200 mm: 150 x 10 mm: 1100 x 630 mm: 120 mm: 55 mm: 4,6 - 8 mm/s: 70 mm/s: 45 l: 1.5 kW: 925 mm: 1200 mm: 900 mm: 1050 mm: 630 kg2 holder pins, height 110 mm (higher ones on request)Manual stop 500 mm with millimeter scaleAdjustable speed2 handwheels for adjusting the stroke and retraction pointPrecise hydraulic stroke adjustment, even under pressureTwo-hand operationHuge range of tools, prices on requestALTERNATIVE:Version with CNC controlThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 400 kNstroke length max.: 285 mmworking feed: 9 mm/secreturn speed: 20 mm/sec: 660x1250 mmwork height max.: 930 mmtoolpiece height max.: 250 mmtotal power requirement: 4 kW: 200x26 mmbending capacity max. - round: 60x5,0 mmDomestic equipments:- semi-automatic NC control (99 programs with 16 steps each)- incl. bending bolt (without punch)- Incl. tool holder for dies- incl. foot pedalThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2025 : 090089 : prompt, Zwischenverkauf v : Türkei : 8900 €: 171.77 €: 1 : 20 to: 185 mm: 200 x 12 mm: 480 x 1060 mm: 200 mm: 80 mm: 10 mm/s: 10 mm/s: 2.2 kW: 930 mm: 1150 mm: 480 mm: 1200 mm: 530 kgProgrammable stroke and retraction pointAdjustable speed and pressureManual jog operation and automatic operating modeHolding pins and tools hardened and ground3 holder pinsBending toolManual stop 400 mmFoot pedalOPTIONS:Cutting-, punching- or pipe bending tools on requestThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 8 Wochen ab Auftragse : Türkei : 12900 €: 247.68 €: 40 to: 285 mm: 200x24 mm: 660x1250 mm: 250 mm: 80 mm: 10 mm/s: 10 mm/s: 4 kW: 930 mm: 1250 mm: 650 mm: 1250 mm: 1100 kgStroke adjustment with digital displayManual and automatic operation modeTool holder pins and tools hardened and groundBending toolFoot pedalOPTIONS:Cutting-, punching- or pipe bending tools on requestThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 8 Wochen ab Auftragse : Türkei : 7300 €: 140.89 €: 10 to: 185 mm: 150x8 mm: 450x900 mm: 150 mm: 60 mm: 10 mm/s: 10 mm/s: 1.1 kW: 915 mm: 900 mm: 450 mm: 1130 mm: 250 kgStroke adjustment with digital displayManual and automatic operation modeTool holder pins and tools hardened and groundBending toolFoot pedalOPTIONS:Cutting-, punching- or pipe bending tools on requestThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

consisting of three rollersWorking length: approx. 1500 mmReference: STS - Lot 6 Auction-ID: A7-49056-247

Ширина листа: 4200 мм Толщина пластины: 14 мм Предварительное изгибание: диаметр 10 мм. Верхний вал: диаметр рулота 340 мм. нижний вал: 310 мм Скорость: - м/мин Управление: Davi CNC Общая мощность: - КВт веса машины ок.: 11 тразмеров машины ок.: 6,5 x 1,75 x 1,65 м- DAVI CNC Control - предварительный сгиб - гидравлический 4-роликовый привод - диаметр бокового крена: 230 мм. Данные для этой рекламы были созданы с помощью ModulMWS — программного решения LogoTech oHG.

: макс. 16 ммквадратная кромка сталь: 16 ммкруглый стержень сталь: 16 ммвес: 45 кг: 180 размеры: 0,4 x 0,4 x 1,1 �

: 100 x 5 ммквадратная кромка сталь: 16 x 16 ммкруглый стержень сталь: 18 ммL-образная балка: 100 x 8 ммразмеры: 400 x 290 x 280 ммвес: 35 к�

: 30 x 8 ммквадратная кромка сталь: 12 ммкруглый стержень сталь: 15 ммвес: 0,025 т: 51 x 31 x 22 смразмеры: 135 �

Standard configuration? Stable machine frame as a welded, all-steel construction? Ram (press beam), highly resistant to torsional forces? Electrohydraulic downstroke drive via proportional valves? Modern block hydraulics? CNC backgauge with rack-and-pinion drive, for X and R axis, safe adjustment of stop fingers from the front? Modufix upper tool clamping system, manual? Lower tool holder for single-V dies, manual clamping, programmable shifting? Control system: 2D/3D graphic control, Delem DA 69 with 12 color screen (LCD)? Safety equipmentAdditional equipmentCrowning options ? CNC crowningBackgauge system options? 4-axis backgauge system ? 2 additional clip-on stop fingers Tool clamping and angle messuring system? Upper tool claming, hydraulic ? Lower tool clamping, hydraulic? ACB PreparationMaterial handling options? 2 front support brackets

sheet width: 2500 mmplate thickness: 30 mmpre-bending: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mStocknumber 2210015Type of machine Hydr. 3-roll bending machineMake HAUSLERType RMA 2500/30Build in 1962Type of control conventional Additional informationmax. widht 2500 mmMax. plate thickness 30 mm3 rollsdiameter upper oll 450 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.