Производитель:
(Категория: 105)
saw blade diameter: 250 mmcapacity 90 degrees: round: 85 mmcapacity 90 degrees: square: 75 mmcapacity 90 degrees: flat: 100x65 mmcapacity 45 degrees: round: 80 mmcapacity 45 degrees: square: 75 mmcapacity 60 degrees: flat: 90x60 mmtotal power requirement: 0,8 kWweight of the machine ca.: 0,04 tSPECIAL PRICE!The assembly saw with extensive standard equipment and a large cutting area· For miter cuts left up to 45°· For sawing steel, stainless steel and, to a limited extent, aluminum profiles· Automatic cooling directly on the saw blade· 24 V safety switch in the handle with restart lock· 38 kg total weight = easy to transport· Length stop, assembly toolOptions:Saw blade 57 EURMachine base type 20505 192,-EURThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
length: 380 mm max.band length: 430 mmweight of the machine ca.: 0,5 t: : : Please note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 330 mmcapacity 90 degrees: flat: 510 x 320 mmcapacity 90 degrees: square: 320 x 320 mmturning speed range:: 40 / 80 m/mindimensions of saw-band: 3440 x 27 x 0,9 mmengine output: 1,5 / 1,8 kWweight: 670 kgSemi-automatic, electro-hydraulic band saw machine for cutting60° left to 60° right.Versatile machine with a tape of 4640 x 34 x 1.1 mm for theCutting pipes, profiles and beams up to a maximum cutting rangefrom 510x320 mm to 0°.The control console on a swiveling arm allows for comfortable andsafe operation from any position.Electronic inverter for continuous belt speed regulationfrom 15 to 100 m/min.Large turntable with a diameter of 280 mm and engravedexact fine scaling, easily adjustable and stored.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
saw blade diameter: 315 mmcapacity 90 degrees: round: 108 mmcapacity 90 degrees: square: 93 mm: 150 x 90 mmWorking height: 920 mmsaw blade turning speeds: 17+33 oder 33+66 U/mintotal power requirement: 1,5/1,8 kWweight of the machine ca.: 0,328 tdimensions of the machine ca.: 0,8x0,9x1,7 mACTION PRICE!High-performance vertical circular saw VKS 315 (Article 20150)• miter left 60° + right 45°• Vice with double clamping arm (fixed 4 times) for low-burr cuts and lateral quick shift• Saw table with large rotating plate and particularly stable vice for optimal material tension• Robust prism guide of the saw head (dovetail guide adjustable)• Automatic cooling• Machine base with chip drawer• Metal handle for high clamping forceATTENTION: Price is without saw blade! (saw blade price EUR 109)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
saw blade diameter: 370 mmcapacity 90 degrees: round: 120 mmcapacity 90 degrees: square: 100 mm: 180x100 mmWorking height: 925 mmsaw blade turning speeds: 15 - 70 U/mintotal power requirement: 1,8/2,2 kWweight of the machine ca.: 0,71 tdimensions of the machine ca.: 1,9 x 1,45 x 2,1 mACTION PRICE!High-performance vertical circular saw hydropneumatic fully automatic.(20192)· miter left 60° + right 45°· Hydro-pneumatic control of the saw unit· Electro-pneumatic material feed unit· Smooth-running, powerful worm drive with large Transmission ratio, integrated in a stable cast housing for Achieving optimal cutting results· Vice with double clamping arm for low-burr cuts Lateral quick shift when changing the miter· Precision prism guide of the gear head, laterally adjustable· Particularly stable base frame with built-in automatic cooling system· Large chip drawer· Chi ...
cutting diameter: 1060 mmsaw band length: 11.430 x 80 x 1,6 mmcutting width: 1,6 mmcutting range: 1060x1260 mmControl: CNC cutting speed: 12-90 m/minpower capacity: 11 kWtable load: 20 tCutting Length max.: 6100 mmtotal power requirement: 20 kWweight of the machine ca.: 21,1 tdimensions of the machine ca.: mAutomatic feed length 2,100 - 6,100 mmThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus ...
: 550 mm: 550 mm: 550 x 550 mmsaw band length: 5980 x 41 x 1,3 mmtable height: 800 mmband speed: 20 - 100 m/mintotal power requirement: 5,5 kWweight of the machine ca.: 3,8 tdimensions: 3,0 x 2,15 x 2,2 mPROMOTIONAL PRICE2-column high-performance automatic band saws from the SBS seriesThe SBS series impresses with its sophisticated technology, high quality and longevityand unrivaled, sophisticated standard equipment.• Modern SNC 20 control for CNC version• Frequency-controlled saw drive• Control buttons with pictograms• Work light• Powered chip brush• Hydraulic belt tension• Clamping pressure regulation• Double vice (before and after the belt)• Creep path for positioning• Bundle tension prepared electrically and hydraulically• Chip conveyorThe SNC 20 control allows you to enter up to 20 different sawing tasks (length and number of pieces) conveniently and easily. Wh ...
cutting diameter: 440 mmweight of the machine ca.: 780 kgmiter: feed: Please note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
диаметр резки: 260 ммсерийный номер: 109967 вольт: 380 Вчастота: 50 Гцвес станка ок.: 500
Диаметр распила: - ммдлина пильной ленты: - ммвысота стола: - ммобщая потребляемая мощность: - кВтвес станка ок.: - тгабариты станка ка.: -
capacity 90 degrees: round: 680 mmcapacity 90 degrees: square: 640 mm: 1250x600 saw band length: 8140x54x1,6 mmband speed: 15 - 90 m/mintable height: 855 mmtotal power requirement: 7,5 kWweight of the machine ca.: 4,96 tdimensions of the machine ca.: 5,7 x 4,0 x 2,75 m2-column band saw for quick cutting, K-tech 1200Hwith pusher system P 30. P 60 (option),Fast, quiet and ergonomic cuttingSpecial development for cutting profiles and beamsas well as solid material. The material is fixedvertically on and section sides. The machine is from K-tech 800 Hstandard with an additional horizontal viceequipped. The interaction of the hydraulicSaw frame lowering, material positioning and thePusher system is CNC controlled.The machines come standard with the environmentally friendlyB&S-Clean Cut cutting system” with minimal quantity lubricationequipped. This saves cleaning effort and is gentleResourc ...
Диаметр пильного диска: 380 ммПневматический зажим: JA Вес станка ок.: 1,3
capacity 90 degrees: round: 350 mmcapacity 90 degrees: square: 330 mm: 500 x 310 band speed: 15 - 100 m/mintable height: 844 mmdimensions of saw-band: 4250 x 34 x 1,1 mmtotal power requirement: 2,2 kWweight of the machine ca.: 1,2 tdimensions of the machine ca.: 1,4 x 2,4 x 1,935 mACTION PRICE!2-column double miter band saw K-tech DG 50/33 HA-I• 2-column miter saw• Solid, yet easy to use• Material height sensor (automatic cut start detection)• Smooth running thanks to bevel cut, feed controller + cutting pressure controller• Massive material infeed roller• Removable chip tray (disinfection)• Energy-saving and low-vibration thanks to bevel cut• Ergonomic, safe and free-standing control panel• Frequency-controlled saw drive 15 -100 m/min.• Hydraulic cutting pressure control valve• Hydraulic control of saw frame and vice• LEDs for monitoring all safety functions• L ...
cutting diameter: 320 mmsaw band length: 4670 mmcutting width: 580 mmtotal power requirement: 7,4 kWweight of the machine ca.: 3 tSawing range, circular, max. 100 - 320 mm vertical, max. 100/100 x 320/460 mmLength of cut, min./max. 0 - 580 mmDistance from column to saw band, max. 690 mmCutting speed, infinitely variable 16 - 160 m/minDimensions of saw band, length x Ø approx. 4,670 x 38 mmLength of remaining pieces, automatic/single cut 100/10 mmSaw blade drive, approx. 4.4 kWTotal electrical load, approx. 7.4 kW - 380 V - 50 HzWeight, approx. 3,000 kgAccessories / Special Features: Infinitely variable speeds of saw blade motor via servo motor and STOEBER drive. Display of cutting speed on control panel. Infinitely variable settings of sawing feed with display of the current cutting speed. Workpiece counter: Number of workpieces can be preset. Selection sw ...
roll diameter: 500 mmthroat: 485 mmworkpiece height: mmtotal power requirement: 2 kWweight of the machine ca.: 1 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Диаметр пильного полотна: 400 ммУгловой: : Kühlung вес станка ок.: 1 тчисло: 4 Stück
capacity 90 degrees: round: 172 mmcapacity 90 degrees: square: 170 mm: 170 x 170 dimensions of saw-band: 2035 x 20 x 0,9 mmdimensions: 430 x 960 x 520 mband speed: 30 - 80 m/mintotal power requirement: 1,5 kWweight of the machine ca.: 38 kgSPECIAL PRICEBerg & Schmid - Assembly band saw PBS 171 ESCPowerful and particularly robust metal band sawAluminum die-cast saw table and infinitely variable cutting speed forMiter cuts up to 60°Optional: machine base type 20508The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 240 mmdimensions of saw-band: 2730 x 27 x 0,9 mmtable height: 920 mmcutting speed: 35 + 70 m/min: 240 mmstroke back stop: 230 mmcross-slide: 270x230 : 210 Impact energy: 200 Air consume per blow: 200x210 : 130 mm: 130 mm: 130x160 mmtotal power requirement: 1,2 kWweight of the machine ca.: 0,26 tdimensions of the machine ca.: 0,9 x 1,6 x 1,74 m• miter left 60°• Quick-release vise with quick-release device a.• Quick release lever for easy handling• Frame and gear made from one piece, very quiet cut and very low vibration• Electrical monitoring of band tension and band breakage, saw band cover.• Carbide saw band guide• Large machine bed• Machine base (disassembled) with automatic coolingThe AutoCut system consists of:Hydraulic cylinder, feed control, spring assembly, limit switchAutomatic saw frame lowering via the hydraulicCylinder, continuously adjustabl ...
saw blade diameter: 315 mmcapacity 90 degrees: round: 108 mmcapacity 90 degrees: square: 93 mm: 150 x 90 mmWorking height: 920 mmsaw blade turning speeds: 17+33 oder 33+66 U/mintotal power requirement: 1,5/1,8 kWweight of the machine ca.: 0,36 tdimensions of the machine ca.: 0,8x0,9x1,95 mSPECIAL PRICE!High-performance vertical circular saw VKS 315 HA (20154/20155)• miter left 60° + right 45°• Vice with double clamping arm (fixed 4 times) for low-burr cuts and lateral quick shift• Saw table with large rotating plate and particularly stable vice for optimal material tension• Robust prism guide of the saw head (dovetail guide adjustable)• Automatic cooling• Machine base with chip drawer• Metal handle for high clamping force• Spring packageSemi-automatic function:1. Saw starts2. Clamp material3. Rapid lowering to the beginning of the material or cut the same for ser ...
capacity 90 degrees: round: 310 mmcapacity 90 degrees: square: 280 mm: 400x250 saw band length: 4020x34x1,1 mmband speed: 37 + 74 m/mintable height: 940 mmtotal power requirement: 1,8/2,2 kWweight of the machine ca.: 0,68 tdimensions of the machine ca.: 1,5 x 1,78 x 1,3 mACTION PRICE !Double miter band saw, hydraulic semi-automatic, GBS 310/400 HA-I Easy• miter left 60° + right 45°• Industrial hydraulics, powerful 18 bar• Best access to the material• Ammeter to check a.- Optimization of cutting force- Tape life- cutting course• Vise closes/opens hydraulically• Chip removal brush• Material turntable with ball bearings b.• Adjustable quick-release c.• Material height sensor (automatic cut start detection)Semi-automatic function:1. Clamp material2. Saw starts3. Rapid lowering to the start of the material or the same for series cutting cut4. Saw band off5. Raise the fr ...
saw blade diameter: 275 mmcapacity 90 degrees: round: 80 mmcapacity 90 degrees: square: 70 mmcapacity 90 degrees: flat: 100 x 60 mmcapacity 45 degrees: round: 70 mmcapacity 45 degrees: square: 60 mmcapacity 60 degrees: flat: 80 x 50 mmclamping range: 110 mmturning speeds: 45 / 90 U/mindimensions of saw-blade: mmtotal power requirement: 0,5 kWweight of the machine ca.: 0,07 tdimensions of the machine ca.: 900 x 700 x 1600 mManual cold circular saw with:- Machine base- Support rail 1500mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Диаметр пильного диска: 255 ммНаклоняемый пильный диск: 45 Высота реза: 75 ммРазмеры стола: 640 x 920 (ausgezogen) ммПильный диск: 30 ммМощность двигателя: 1,6 кВтЧастота подключенной нагрузки: 230 ВВес машины: 32 кгРазмеры (Д/Ш/В): 720 x 1080 x 920 м
cutting diameter: 185 mmsaw band length: 2.085 x 20 x 0,90 mmtable height: 915 mmband speed: 35/70 m/mincapacity 90 degrees: round: 185 mmcapacity 90 degrees: square: 150 mmcapacity 90 degrees: flat: 220 x 150 mmconnected load frequency: 400 Vtotal power requirement: 0,8 kWweight of the machine ca.: 195 kgdimensions of the machine ca.: 550 x 1.280 x 1.740 mm mmMetal band saw with stepless electronic speed control andautomatic lowering.• Selector switch for hydraulically controlled or manual band arm lowering• Saw arm can be swiveled up to 60 ° to the right• Quick-action vice• Belt guide with 8 ball bearings• Hydraulic saw band tension with tension pressure display and band break shutdown•Incl. Coolant system•Incl. Machine cabinetThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
saw blade diameter: 350 mmcapacity 90 degrees: round: 120 mmcapacity 90 degrees: square: 110 mmcapacity 90 degrees: flat: 200x88 mmcapacity 45 degrees: round: 115 mmcapacity 45 degrees: square: 110 mmcapacity 45 degrees: square: 150x80 mmtotal power requirement: 1,5/1,8 kWweight of the machine ca.: 0,27 tdimensions: 1,1 x 0,95 x 1,7 m- Hydropneumatic semi-automatic - Miter left/right 45° - head diagonal cuts up to 45° (shifter) - Ball bearing table - pneumatic. Double clamping device - Machine base with fog spray device - Chip extraction socket on the saw blade protective hoodThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 225 mmdimensions of saw-band: 2480 x 27 x 0,9 mmtable height: 935 mmcutting speed: 45 + 90 m/min: 225 mm: 145 mm: 90 mm: 150 x 245 mm: 190 x 150 mmcapacity 60 degrees: flat: 120 x 90 mmtotal power requirement: 1,1 kWweight of the machine ca.: 0,24 tDimensions (LxWxH): 1380 x 580 x 930 mm- With an output of 1100 watts, the device is ideal for processing hard types of metal.- Thanks to the emergency stop and automatic switch-off, you can work safely- The low-noise electric motor ensures a quiet working atmosphere- Comfortable buttons guarantee pleasant operation of the device.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
capacity 90 degrees: round: 305 mmcapacity 90 degrees: square: 260 mm: 350 x 200 saw band length: 3375 x 27 x 0,9 mmband speed: 37 + 74 m/mintable height: 940 mmtotal power requirement: 1,5/1,8 kWweight of the machine ca.: 0,61 tdimensions of the machine ca.: 1,5 x 1,75 x 1,9 mDouble miter metal band saw with AutoCut function - Miter cuts up to 60° left and 45° right - Ball bearing turntable - Vice can be moved sideways - Massive, large material support - Automatic coolingFigure is semi-automatic.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
saw blade diameter: 530 mmcapacity 90 degrees: round: 180 mmcapacity 90 degrees: square: 170 mmcapacity 90 degrees: flat: 380x70 mmcapacity 45 degrees: round: 180 mmcapacity 45 degrees: square: 150 mmcapacity 45 degrees: square: 290x70 mmtotal power requirement: 2,2 kWweight of the machine ca.: 350 tdimensions: 1,1 x 0,9 x 1,5 mUnderfloor aluminum circular saw, hydropneumatic semi-automatic.· Maintenance unit for pneumatic control· Turntable with ball bearings· Suction nozzle for chip extraction system· 2 pneumatic vertical clamps· Rotation range 180°· Movable rear material stop = enlargeable cutting area· Saw blade feed continuously adjustable· Two-hand safety controlHorizontal vices (option)· Mist spray device for cooling emulsion· Engine braking· Machine base· The use of our B & S Coolmatic Plus is mandatory for profile cuts necessary. Saw blade optionalThe data for ...
saw blade diameter: 350 mmcapacity 90 degrees: round: 120 mmcapacity 90 degrees: square: 110 mmcapacity 90 degrees: flat: 200x88 mmcapacity 45 degrees: round: 115 mmcapacity 45 degrees: square: 110 mmcapacity 45 degrees: square: 150x80 mmtotal power requirement: 1,5/1,8 kWweight of the machine ca.: 0,59 tdimensions: 1,9 x 1,4 x 1,8 mHydropneumatic fully automatic· Miter Left/Right· Bevel head cuts up to 45° (shifter) a. b.· Hydro-pneumatic control of the saw head· Pneumatic double clamping device· Pneumatic vertical clamping device· Electro-pneumatic material feed unit with material hold-down device· Vernier for length adjustment· Integrated coolant spray device· Swarf suction nozzle on the saw blade protective hood· Leftover piece length in automatic mode 210 mmMPS control:· Save cut start/end· Display of current consumption, number of pieces, cutting time...· Adjustable w ...
saw blade diameter: 275 mmcapacity 90 degrees: round: 90 mmcapacity 90 degrees: square: 80 mmcapacity 90 degrees: flat: 100x70 mmcapacity 45 degrees: round: 75 mmcapacity 45 degrees: square: 70 mmcapacity 60 degrees: flat: 80x60 mmtotal power requirement: 1,1/1,3 kWweight of the machine ca.: 0,12 tdimensions of the machine ca.: 0,5 x0,85 x0,95 mThe versatile professional metal circular saw. Convincing in performance and price.• For miter cuts left up to 45°• For sawing steel, stainless steel and, to a limited extent, aluminum profiles• Spindle vice with double clamping arm for low-burr cuts• Cone safety clutch made of hardened steel to protect the saw blades.• 2 speeds 33 + 66 rpm• Automatic cooling directly on the saw blade• Double bearing for saw head• 24 V safety switch in the handle with restart lock• Length stop, assembly tool• Closed cast, massive cast superstr ...
cutting diameter: 227 mmsaw band length: 2455 mmtable height: 840 mmcutting width: 260 mmturning speed range:: 36 / 72 m/mindimensions of saw-band: 2455 x 27 x 0,9 mmcapacity 90 degrees: round: 227 mmcapacity 90 degrees: square: 220 mmcapacity 90 degrees: flat: 260 x 220 mmcapacity 45 degrees: round: 150 mmcapacity 45 degrees: square: 145 mmcapacity 45 degrees: flat: 200 x 220 mmtotal power requirement: 1,5 kWweight of the machine ca.: 0,25 tdimensions of the machine ca.: 0,8 x 1,4 x 1,5 mMiter band saw- automatic cut- Base frame- Coolant pump- Chip brush for cleaning the saw band- Vise with quick adjustmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
