Отрезные токарные станки

turning diameter: 460 mmturning length: 795 mmcontrol: MORI SEIKI M730 BM Swing diameter face slide: 590/360 mmspindle passage: 80 mmTraverse X/Z:: 260/795 mmtotal power requirement: 40 kVAweight of the machine ca.: 6,4 tdimensions of the machine ca.: 3.994 x 3.056 x 2.187 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 330 mmturning length: 510 mmcontrol: FANUC 18i - T turning diameter over bed: 600 mmturning diameter over slide: 550 mmx-travel: 250 mmz - travel: 580 mmy-travel: 100 (±50) mmb-axis: 0.001 mmrapid travel x/y/z: 20/7,5/24/ m/minrapid taverse: B- Achse 20 m/minc-axis: 4.500/ 6.000 °spindle passage: 76/ 45 mmspindle nose: A2#6 spindle turning speed range: 4.500/ 6.00 U/minspindle drive: 15/ 7,5 kWTurret: 12- fach Stationen Chip coveyor: Inkl. chuck: Hauptspindel 210 mmchuck: Subspindel 160 mmtotal power requirement: 50,7 kVAweight of the machine ca.: 4,9 tdimensions of the machine ca.: 3.118 x 1.705 x 2.076 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 470 mmturning length: 720 mmcontrol: FAGOR 8055 TC/B centre height: 366 mmdist. between centers: 3000 mmc-axis: 0Drive tool: feed speeds: 8.000 mm/minmain spindle bore: 92 mmspindle nose: DIN-55027-11 spindle diameter in front bearing: 150 mmspindle rate: 0-1600 Spindle power: 17/20,5 max. torque on the spindle: 1590/1920 quill:: 100 mmtail stock: 200 mmtaper: Morse 6 : Sauter VCI50 Ø400 mm. bed width: 430 mmtotal power requirement: 28 kWweight of the machine ca.: 5.700 kgdimensions of the machine ca.: 6.800 x2.385 x1.765 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 660 mmturning length: 1.542 mmcontrol: MSX-701 III greates pass round over bed: 730 mmspindle passage: 80 mmdist. between centers: 1.862 mmX1: 750 Z1: 1.550+100 mmX2: 195 mmZ2: 1.525 mmy-axis: +-210 mmb-axis: +- 120 mmcoolant tank: 640 l: Number of spindles: 2 St.total power requirement: 90 kVAweight of the machine ca.: 25 tdimensions of the machine ca.: 6.800 x 3.200 x 2.900 mmRapid traverse rate (X1, Z1 Axis) 50 m./min.Rapid traverse rate (X2 Z2 Axis) 30 m./min.Rapid traverse rate (Y Axis) 30 m./min.Rapid traverse rate spindle 2 ZS 30 m./mm.Rapid traverse rate B axis 40 rpmRapid traverse rate C axis 250 rpmSpindle 1:Speed 4.000 rpmNumber of speed ranges 2Nose JIS A2-8C axis in spindle 1 IMin indexing increment spindle 1 0.0001ºPower 26/22 kWMax torque 724 Nm3-jaw automatic chuck KITAKAWA B-212 A8 Chuck size 304 mm.Chuck h ...

x-travel: 155 mmy-travel: 170 mmz-travel: +- 25 mmchucking diameter: 135 mmDrive: 3,7 kWspindle speed:: 8.000 Turret: 2 a 10 c-axis: 0,0001 0y-axis: +- 25 mmNumber of working hours: 10.000 htotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Внешний диаметр поворота: 4.300 Длина поворота: 3.600 мм Диаметр поворота над суппортом: 3.040 мм Проход прутка: 140 мм Диапазон скоростей поворота: 0,18-92 U/мин Цифровая индикация: HEIDENHAIN Общая потребляемая мощность: 56 кВт Весмашины ок.: 55 тРазмеры машины ок.: 9.450 x 4.700 x 4.400 мНовинка 1976 / 2019 - 8 независимых кулачковых патронов 2.500 мм.

Винт-резак Лат Ерпорт Рязань 1М63 (Россия), 1981, рабочий кусок максимального диаметра над кроватью 630 мм; штучка работы максимальная длина 2800 мм. Цена 4300 EUR.

: : VDI 20 : number: 3 Stück im Paket : Please note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.