Измерительные машины (280)

\"Mitutoyo Lot – Digimatic Mini Processor DP-1VR + Accessories (17 pieces) Mitutoyo lot consisting of a Digimatic Mini processor as well as original accessories and new goods.Components:1 × Mitutoyo Digimatic Mini-Processor DP-1VR • With integrated printer • Digimatic interface • Tolerance evaluation (GO / NG / +NG) • Statistics function • Power supply available2 × Mitutoyo footswitch • Part No. 937179T • New in orig.3 × Mitutoyo Connecting Cable 1 m • Part No. 937387 • New in orig.1 × Mitutoyo USB-ITN-C Interface • Type 06AFM380C • New in orig. boxMultiple signal cables / connection cables • Partly in original packaging • Labeled \"Signal Cable Caliper\"Total scope: 17 parts\" Auction-ID: A7-46417-300

\"Item: Digital dial gauge / Digimatic IndicatorManufacturer: MitutoyoType / Order No.: 543-781BModel: ID-S1012XBOrigin: Made in JapanCondition: Mint • Measuring range: 0.01 – 12 mm • Display: digital (ABSOLUTE Digimatic) • Functions: ON/OFF, ORIGIN (zero point), ABS measuring system • Data interface: Digimatic (for Mitutoyo data cable) • Design: Standard digital dial gauge • Resolution: typical 0.01 mm (factory specification)\" Auction-ID: A7-46417-226

\"Gauge block set / Parallel gauge blocks – Long end gauge (used)Manufacturer: Längenmesstechnik GmbH LimbachStandard: DIN EN ISO 3650Tolerance class: Class 2All gauge blocks with through-holes, design as precision parallel gauge blocks.Condition • Used • Measuring surfaces visually good, with slight traces of use • Wooden cases with signs of wear and tear 4 individual longitudinal dimensions: 1. 200 mm – ID 3064 2. 250 mm – ID 3065 3. 300 mm – ID 3066 4. 400 mm – packed separately\" Auction-ID: A7-46417-205

\"Tolerance test pin set Ø 5 mmRichard Knauthe KG No. 556TGL 13619/1Precision test pin set for checking dimensional deviations related to nominal dimension Ø 5 mm.Gradations from -100 μm to +100 μm.Complete in the original wooden box. Nominal dimension: 5 mmDeviation range: –100 μm to +100 μmGraduation: 1 μm / larger jumps according to the boardManufacturer: Richard Knauthe KGStandard: TGL 13619/1Design: mechanical test pin set in a wooden box\" Auction-ID: A7-46417-285

Internal gauge set from Eytool for precise internal measurement in the range of 5 to 100 mm. The set is 4 pieces and comes in a sturdy plastic case with a custom-fit foam insert.Condition:Very good optical condition. Measuring instruments clean, complete and without noticeable damage.    •    Manufacturer : Eytool    •    Designation: Internal gauge set MB    •    Measuring range: 5–100 mm    •    Reading: 0.01 mm    •    Version: mechanical    •    Quantity: 4 parts    •    Item no.: 33201100 Auction-ID: A7-46417-87

\"Mixed lot of 38 measuring devices, consisting of, among other things: • Adjustment rings (including Ø 80 mm, Ø 90 mm, Ø 112.492 mm) • Limit gauges / gauges (various nominal dimensions) • H7 limit gauges (various diameters, fully cylindrical) • Individual adjustment washers / test ringsManufacturer's markings including Helios, MPT, Eyltool\" Auction-ID: A7-46417-209

\"Sylvac Digital Length Comparator 750 mm / 0.01 mm (Swiss Made)Digital length comparator from Sylvac for measuring length deviations in industrial use.The device is designed for comparative measurements with a preset function and is typically used in measuring stands, fixtures and in mechanical and special machine construction. • Measuring range: 747.9 mm (29,445 inch) • Resolution: 0.01 mm • Measuring principle: comparative measurement (preset measurement) • Display: digital • Units: mm / inch switchable • Functions: preset, zero position, on/off • Type: long-stroke measuring system / displacement measuring device • Manufacturer: Sylvac • Origin: Swiss Made Auction-ID: A7-46417-237

\"Lot measuring tool & Mitutoyo accessories – depth measurement accessories, tips,adapters Item measuring accessories from workshop liquidation.Included are: • Mitutoyo Depth Gage Span 900370 – 180 mm (Made in Japan) • Mitutoyo 167-111 (MB-275) extension rod • Mitutoyo DB ATT-3 accessory • Several centering tips • Test mandrels • Magnetic holders (partly repackaged) • Various measuring tips and adaptersCondition mixed: partly new, partly used with normal signs of use.\" Auction-ID: A7-46417-312

\"Manufacturer: MitutoyoVersion: Gauge blocks in wooden boxStandard: metricCondition: used, box and blocks with signs of useNote: Set not completeMitutoyo Gauge block in wooden box.The set comes from industrial use and is in used, functional condition. • Manufacturer: Mitutoyo • Design: Gauge blocks (block set), metric • Material: steel • Storage: original wooden box\" Auction-ID: A7-46417-152

\"Concentricity tester with measuring stand Total length: approx. 700 mm\" Auction-ID: A7-46417-272

Auction-ID: A7-46417-214

\"Mahr Inner Micrometer Set 50–600 mm · 0.01 mm · Internal Gauge · in a wooden boxMahr inner micrometer set for precise internal measurement of diameters and bores in the range of 50 to 600 mm.Scope of delivery • 1× Mahr micrometer head 0–50 mm • Extensions 50 / 100 / 150 / 200 mm • 1× adjustment dimension 50 mm • 1× original wooden box (scope of delivery exactly as shown)Condition • Used • Measuring surfaces visually good, no breakouts recognizable • Manufacturer: Mahr (Carl Mahr / Mahr GmbH) • Type: internal micrometer / internal measuring screw set • Measuring range: 50–600 mm • Reading: 0.01 mm • Design: mechanical • Standard temperature: 20 °C • Calibration note: older test sticker available (07/2015)\" Auction-ID: A7-46417-157

\"Scribing and control plate 200 × 200 mm, cast design with feetScribing or control plate in square design.The plate serves as a flat support and reference surface for testing, marking and control work in toolmaking, quality assurance or in the workshop. Surface finely worked, all around with chamfer. Underside with four cast feet for a stable support. Dimensions: 200 × 200 mmHeight: approx. 55 mmMaterial: cast body with machined surfaceDesign: with feet\" Auction-ID: A7-46417-335

\"3-point internal measuring screwMeasuring range: 225–250 mmVersion: analogueManufacturer: not clearly markedAccessories: Adjustment ring Ø 250 mm (marking \"250 C\"), original case, instructions, adjustment tool (screwdriver)3-point internal measuring screw for the measuring range 225–250 mm including matching adjustment ring Ø 250 mm. The measuring device is located in the original case with foam insert. An operating manual for three-point internal measuring screws (analogue/digital) is included. Condition: Used. Visually good condition with slight signs of wear. Calibration sticker available, but no current calibration documented. Functional test not carried out. • 3-point internal measuring screw 225–250 mm • Adjustment ring Ø 250 mm • Original case • Instructions\" Auction-ID: A7-46417-121

\"Adjustment / length measurement set – steel – 200–400 mm – in a wooden caseAdjustment / length measures made of steel, stored in a sturdy wooden box. • Type: Adjustment dimensions / length dimensions / parallel dimensions • Material: steel • Quantity: 4 pieces • Lengths: • 200 mm • 250 mm • 300 mm • 400 mm • Holes: available (easy handling)\" Auction-ID: A7-46417-156

\"Jenoptik Hommel-Tester T500 Roughness measuring device in a case with accessoriesPortable roughness measuring device Hommel Tester T500 from Jenoptik / Hommel-Etamic.The device is designed for mobile tactile roughness measurement in manufacturing and quality assurance. Compact design with integrated display unit. Scope of delivery: • Hommel Tester T500 hand-held device • Button (mounted) • Battery charger • 2x 9V batteries (Varta / GP ReCyko) • Screwdriver • Operating instructions (item no. 10010384, version from V1.6) • Original transport case with molded foam insertThe device is delivered in a system case and can therefore be transported directly.Condition: used, optically with normal signs of wear. Case and insert complete. Manufacturer: Jenoptik Germany / Hommel-EtamicModel: Hommel Tester T500Measuring principle: tactile roughness measurementDisplay: integrated displa ...

\"Inner micrometer set / internal measuring device in wooden boxThe set consists of a measuring head with scale drum as well as several extensions and adjusting/accessory parts. The extensions are marked with length specifications (e.g. 50 mm, 100 mm, 200 mm, 400 mm). Area markings such as \"5/54\" are attached to the parts. An adjustment dimension and other accessories are available in the box. Condition: Used. Optically with signsof wear due to age and storage Scope of delivery: • Inner micrometer / measuring head • Several extensions (see pictures) • Adjustment dimension • Other accessories according to the picture • Original wooden box\" Auction-ID: A7-46417-119

\"Helios DIGIMET Digital Dial Gauge 0–100 mm (0.001 mm)Digital long-stroke dial gauge Helios DIGIMET with a measuring range of 0–100 mm and a resolution of 0.001 mm. • Manufacturer: Helios • Series: DIGIMET • Measuring range: 0–100 mm (4\") • Resolution: 0.001 mm (0.00005\") • Measurement type: depth measurement • Display: digital, mm/inch • Origin: Preisser Messtechnik (Helios)\" Auction-ID: A7-46417-234

\"Inner measuring screw set (2-point contact) from GDR industrial production, manufacturer Suhl. Measuring range from 60 to 900 mm is covered by several extensions. The reading is done mechanically with 0.01 mm pitch. An original test certificate from HITEC Messtechnik is available. The test was carried out in accordance with DIN 863 Part 4, and the examinee was assessed as fit for use. The test certificate is historical and serves as proof of the previous calibration:Scope of delivery • Measuring head internal measuring screw • Extensions / intermediate pieces according to measuring range • Original wooden case • Original test certificate (HITEC measurement technology)Condition • Used, age- and use-related traces of use • Scales easy to read • Mechanics functional • Manufacturer: Suhl • Design: Internal measuring screw, 2-point contact • Measuring range: 60–900 mm ...

\"Lot of 11 micrometer measuring heads / fine adjustment spindles (used)Design:Mechanical micrometer measuring heads (fine adjustment spindles), cylindrical design, with scaling. • Reading up to 0.01 mm • Scale ranges including 0–10 / 0–30 / 0–40 mm (mixed) • With knurling and locking • Different designs and lengths\" Auction-ID: A7-46417-208

\"3-point internal measuring device / three-point internal measuring screwManufacturer: HogetexMeasuring range: 250–275 mm (marking on the measuring device)Accessories: Setting ring Ø 237.503 mm, original wooden boxes, dimensional test documentsHogetex 3-point internal measuring device for the measuring range 250–275 mm. The set includes the matching adjustment ring Ø 237.503 mm. Gauge and adjustment ring are each supplied in the original wooden box. There is a dimensional check for the adjustment ring: nominal dimension 237.503 mm, actual dimension 237.505 mm (document available). Test sticker available on the adjustment ring. Condition: Used. Gauge and adjustment ring in good, well-maintained condition with slight signs of use. wooden boxes clearly used. No current, traceable calibration. Scope of delivery: • Hogetex 3-point internal measuring device, range 250–275 mm • Set ...

\"Test pin set 3.00–4.00 mm in 0.01 mm gradationCylindrical measuring pinsAccuracy ±1 μmGraduation 0.01 mmPrecision test pin set for checking bore diameters in the range of 3.00 mm to 4.00 mm.Gradation 0.01 mm.High dimensional accuracy ±1 μm.GDR/East production by KS Schmalkalden.Delivered in a wooden box. Optically good, used condition.Pins complete Measuring range: 3.00 – 4.00 mmGraduation: 0.01 mmNumber of pins: 101 piecesAccuracy: ±0.001 mmStorage: wooden box\" Auction-ID: A7-46417-287

\"Sylvac Digital Length Comparator 400 mm / 0.01 mm (Swiss Made)Digital length comparator from Sylvac for measuring length deviations in industrial use.The device is designed for comparative measurements with a preset function and is typically used in measuring stands, fixtures and in mechanical and special machine construction. • Measuring range: 399.5 mm (15.7295 inch) • Resolution: 0.01 mm • Measuring principle: Comparison measurement (preset measurement) • Display: digital • Units: mm / inch switchable • Functions: preset, zero position, on/off • Type: long-stroke comparison measuring device / displacement measuring system • Manufacturer: Sylvac • Origin: Swiss Made\" Auction-ID: A7-46417-239

\"Mitutoyo Digimatic Mini-Processor DP-1HS (Code 264-503)Mitutoyo Digimatic Mini-Processor DP-1HS with integrated thermal printer.Manufacturer: Mitutoyo CorporationModel: DP-1HSCode No.: 264-503Made in Japan • Data output of Mitutoyo Digimatic measuring equipment • Tolerance evaluation (GO / NG) • Statistics function • Printout of measured values • Integrated printer • Digimatic data interface • Power supply (DC 9V / 500 mA) • Instruction manual • Original box\" Auction-ID: A7-46417-299

\"Item Measuring Equipment Accessories / Spare Parts – Mitutoyo / Sylvac / VariousItems from a Measuring Room.Consisting of various measuring equipment accessories, spare parts and small components. Recognizable contents include:Mitutoyo: • Lifting lever for dial gauge series 2 (bag, 10 pieces) • Various adapters / inserts / extensions • Several stylus bolts / measuring inserts • Small parts and fastenersSylvac: • ULZ7 M2.5 H30 (1 pair) • ULZ8 M2.5 H60 (1 pair) • Original packagingOther parts: • Signal components • Small holders / brackets • Measuring pins • Spring sets / screws • Various mechanical components • Partly repackaged, partly used⸻Condition • Mixture of new goods (partly in original packaging) and used parts • From professional measuring room stock\" Auction-ID: A7-46417-301

Measuring instrument set / measuring equipment lot – 10 pieces, consisting of various internal, outdoor and comparative measuring equipment. 1. Digital U-screw gauge 0–25 mm • Manufacturer: Mitutoyo • Protection class: IP65 (coolant proof) • Reading: digital 2. Mechanical U-meter gauge 0–25 mm • Standard: TGL 1504.6-1 • Manufacturer: GDR production 3. Mechanical U-screw gauge (presumably 25–50 mm) • Manufacturer: not clear • Mechanical scale reading 4. Mechanical U-clamp (small design, tip measurement) • Application: Fine/tip measurement 5. Mechanical tip micrometer • For hard-to-reach measuring points 6. Dial gauge Ø approx. 58 mm • Manufacturer: Mitutoyo • Resolution: 0.01 mm 7. Dial gauge Ø approx. 40 mm • Manufacturer: not clear (German production) • Resolution: 0.01 mm 8. Test wedge / test gauge • Marking: \"Test aid\" • In leather case 9. Sma ...

\"Design:Zero adjuster / tool zero-point setting deviceManufacturer:SAV Spanntechnik GmbHType / Design:SAV 483.02 – Type NE 1 (for vertical probing)Condition:Used, visually very good. Dial gauge functional. No visible damage to the stylus surface or housing. • Reading accuracy: 0.01 mm • Height of housing / reference surface: approx. 49.5 mm • Height of springy sensing surface: approx. 51.5 mm • Housing diameter: approx. 68 mm • Diameter of sensing surface: approx. 45 mm\" Auction-ID: A7-46417-247

\"Precision base plate from the measuring room. Probably adapter or mounting plate for measuring arm (e.g. Faro or comparable systems). Very stable design with integrated shim/magnet elements. Ideal as a test or reference tool. • Marking: KF29416E1. JP1 • Further embossing: 7718-15:01 / B-9-1712 • Test marking \"Test aid\" • Material: steel / tool steel • Solid industrial design • Central bore • Several recessed round elements (shim/magnet body) • Origin: Measuring room / quality assurance\" Auction-ID: A7-46417-317

\"Manufacturer: MitutoyoVersion: Gauge blocks in wooden boxStandard: metricCondition: used, box and blocks with signs of useNote: Set not completeMitutoyo Gauge block in wooden box.The set comes from industrial use and is in used, functional condition. • Manufacturer: Mitutoyo • Design: Gauge blocks (block set), metric • Material: steel • Storage: original wooden box\" Auction-ID: A7-46417-153

\"Mitutoyo digital measuring head with adjustment bracketDigital Mitutoyo measuring head mounted on a solid reference or adjustment bracket. Manufacturer: MitutoyoDisplay: digitalResolution: 0.001 mm or 0.01 mm (depending on model – probably 0.001 mm)Functions: ZERO/ABS, PRESET, ±, DATAMeasuring direction REV display availableData output (Mitutoyo standard)Mounted on base body\" Auction-ID: A7-46417-293

\"6-piece set of precision measuring rails / parallel gauge holders – MASSI / KOBA – up to 1000 mm6-piece set of adjustable precision measuring rails or parallel stops.Manufacturers mainly MASSI, a long version KOBA (800–1000 mm). Included lengths: • 200 mm • 400 mm • 500 mm • other versions • 800–1000 mm (adjustable)With fine adjustment via knurled wheel.\" Auction-ID: A7-46417-308

\"Sylvac Digital Length Comparator 400 mm / 0.01 mm (Swiss Made)Digital length comparator from Sylvac for measuring length deviations in industrial use.The device is designed for comparative measurements with a preset function and is typically used in measuring stands, fixtures and in mechanical and special machine construction. • Measuring range: 399.5 mm (15.7295 inch) • Resolution: 0.01 mm • Measuring principle: Comparison measurement (preset measurement) • Display: digital • Units: mm / inch switchable • Functions: preset, zero position, on/off • Type: long-stroke comparison measuring device / displacement measuring system • Manufacturer: Sylvac • Origin: Swiss Made\" Auction-ID: A7-46417-238

\"high-quality lot made of border gauges (GO / NO-GO), stored in original wooden boxes. The gauges cover a diameter range of approx. 1 mm to 25 mm. The teaching materials are mainly designed in pairs (good / reject), with scale or tolerance marking (e.g. H7, Cr). In some cases, inspection stickers are available. • Tool type: Limit gauges / limit gauges (GO / NO-GO) • Diameter range: approx. 1 mm – 25 mm • Tolerances: predominantly H7 (others possible) • Design: double-sided (good / reject) • Storage: wooden boxes • Condition: used\" Auction-ID: A7-46417-181

\"Lot of 6 pieces – Gauge size 400 mm + 3 Gauge holders + AccessoriesPart of the lot: • 1 × Gauge 400 mm (in a wooden box, Made in China) • 1 × Gauge Gauge 400 mm • 1 × Gauge Gauge 300 mm • 1 × Gauge Gauge 50 mm • 2 × Accessories/Clamping Elements\" Auction-ID: A7-46417-297

\"Inner measuring screw set (2-point contact) from GDR industrial production, manufacturer Suhl. Measuring range from 60 to 900 mm is covered by several extensions. The reading is done mechanically with 0.01 mm pitch. An original test certificate from HITEC Messtechnik is available. The test was carried out in accordance with DIN 863 Part 4, and the examinee was assessed as fit for use. The test certificate is historical and serves as proof of the previous calibration:Scope of delivery • Measuring head internal measuring screw • Extensions / intermediate pieces according to measuring range • Original wooden case • Original test certificate (HITEC measurement technology)Condition • Used, age- and use-related traces of use • Scales easy to read • Mechanics functional • Manufacturer: Suhl • Design: Internal measuring screw, 2-point contact • Measuring range: 60–900 mm ...

\"Vogel Digi Plus-Line Digital dial gauge 0–100 mm / 0.01 mmDigital dial gauge from Vogel Germany from the Digi Plus-Line with a measuring range of 0–100 mm and a resolution of 0.01 mm. • Measuring range: 0–100 mm • Resolution: 0.01 mm • Display: digital LCD, 6-digit • Switching: mm/inch • Series: Digi Plus-Line • Manufacturer: Vogel Germany • Order number: VG240213\" Auction-ID: A7-46417-236

\"Plan-parallel glass test dimensions / precision glass rings (used)Scope / Composition • Total quantity: 12 pieces • Of which: • 2 complete sets with 12 mm dimensions (each in a case) • 1 set with 24 mm dimensions (content 3 pieces) • Storage in case• 1 single sizeCondition:Used. Visually good condition, no obvious breakouts or cracks recognizable. No current calibration or metrological test performed. Scope of delivery: • 12× glass test dimensions according to the above list • Cases as shown Manufacturer: Carl Zeiss JenaOrigin: GDRDesign: plane parallel ground glass test dimensionsPitch / accuracy: 0.0001 mm\" Auction-ID: A7-46417-202

\"Cylindrical measuring pins (test pins) for bore testing, fit and dimensional control. What's in the box: • 3× full sets of test pens • Original casesCondition:Used. Traces of age and wear present on cases. Measuring pins optically neat, no visible damage. Cylindrical Measuring Pins / Test Pins – Sets (used)Manufacturer: • Richard Knauthe KG, Limbach-Oberfrohna • Schmalkalden (GDR production)Standard / Marking: • TGL 13620/I • \"Test Aids\" • Accuracy according to marking: ± 0.001 mm • Graduation: 0.05 mmCircumference / CompositionTotal: 3 complete sets • Set 1: Measuring range 2.0 – 3.0 mm • Set 2: Measuring range 3.0 – 4.0 mm • Set 3: Measuring range 4.0 – 5.0 mmAll sets are complete, in original cases (wood)\" Auction-ID: A7-46417-203

Test pin set (test measurement set) according to DIN 2269 for fine tuning and checking measuring equipment or for comparative measurement. The set is 7 pieces and covers the range 23.09 to 23.15 mm. Delivered in the original wooden box.Condition:Very good optical condition. Test pins clean, without any noticeable damage. Wooden box with slight signs of wear.Scope of delivery:    •    7 test pins according to the above list    •    Original wooden box    •    Standard: DIN 2269    •    Design: Test pins / gauge block-like test specimens    •    Quantity: 7 pieces    •     Nominal dimensions:23.09 / 23.10 / 23.11 / 23.12 / 23.13 / 23.14 / 23. ...

Manufacturer: TESA SA, SwitzerlandType: Quick-Control 1Name: TESA Quick-Control Measuring Table / Recording TableDescription:Only the measuring table from the TESA Quick-Control System is offered.It is a round precision measuring table with drilling pattern and mechanical adjustment unit for picking up and positioning workpieces for internal and external measurements. The measuring table is intended for use in dimensional and comparative measurement and is usually operated in conjunction with separate evaluation units and transducers.Scope of delivery:– TESA Quick-Control 1 measuring table– Accessories and adapter parts as shown– Original TESA transport case– Documentation in paper form – Scope of delivery only as shownCondition:Used. Traces of use present. Optical condition overall decent. – Measuring range: 0 – 170 mm– Measuring type: internal and external measurement� ...

\"Eyltool Steel Parallel Dimension Set 87 pieces, DIN 861 Grade 2Steel Limit Measure (Parallel Limit Dimensions) according to DIN 861, Quality Class 2. Version for length testing and adjusting measuring equipment. Set is complete. Used, good condition. • Manufacturer: Eyltool • Item no.: 3582287 • Standard: DIN 861 • Grade: 2 • Number of final dimensions: 87 pieces • Material: Steel • Reference temperature: 20 °C • Marking: Gage Blocks, Grade 2 • Measuring range (typical set): 1.005 mm – 100 mm (graded according to the composition in the set) • Storage: Wooden box with hinged lid\" Auction-ID: A7-46417-325

\"Complete metric gauge block set with 87 gauge blocks, consisting of: • F grading 1.001 – 1.009 mm • Further gradings 1.01 – 1.49 mm • Additional dimensions 0.5 / 1 / 1.5 / 2 / 2.5 / 5 mm • Longer gauge blocks 10 / 20 / 30 / 40 / 50 / 60 / 70 / 80 / 90 / 100 mmCondition: • Used, very neat condition • Measuring surfaces clean, without rust or chipping • Usual, slight signs of wear (fine surface lines) Article: Parallel gauge set / Gaugeset Design: metricAccuracy class: Grade 1Number of gauge blocks: 87 piecesReference temperature: 20 °CMaterial: hardened steelStorage: high-quality wooden box\" Auction-ID: A7-46417-154

\"Manufacturer: HAENNI (Switzerland)Device type: Mechanical thermo-hygrograph / recording devicewith weekly writing mechanism • Combined temperature and humidity recorder • Two writing arms • Chart roll for weekly recording • Scale right: °C and % RH • Key + spare writing refills available • Wall housing with lock\" Auction-ID: A7-46417-309

\"Lot of measuring balls G10 / H13 – different diameters – for envelope measurementFor sale is a lot consisting of several precision measuring balls (individual packaging) for envelope measurement. The balls are labeled with diameter and tolerance information, some with grade G10 and H13 reference. • Design: precision measuring balls • Grade: G10 in some cases • Tolerance specifications: ±0 or deviations (e.g. -1 / -3 / -6 μm) • Diameters include: • 10.0 mm • 10.319 mm • 13.494 mm • 17.462 mm • 19.288 mm • 19.305 mm • 72.7 mm • Other individual dimensions according to labeling • Partly with lot marking • Packaging: individually in bags\" Auction-ID: A7-46417-314

KEYENCE WM-3000 (Wide Area Coordinate Measuring Machine) mobile coordinate measuring machine. The system was delivered in November 2020 and is in well-maintained, functional condition. It is a complete measuring system including accessories, software and transport cases. Scope of Delivery • WM-3000 transducer • WM-P3000 Probe • WM-C3000 Control/Camera Module • WM-S1 camera tripod • 3x WM-B1 batteries • WM-BC1 charger • OP-99032 Power Cord • Laptop with WM measurement software installed • Transport case • Calibration certificate (09/2020) • Inspection Result Condition • Functional • Visually well-groomed • Calibration from 09/2020 (new factory calibration recommended) • Sale from ongoing operations The WM-3000 is an optically guided 3D coordinate measuring system for the large-volume measurement of components in the range of 300 mm to 3,000 mm. Measuremen ...

\"Precise final dimension of 100 mm made of steel with integrated magnet for secure fixation on metallic surfaces. Suitable as a reference dimension for testing, setting and comparison measurements in the workshop, measuring room and quality assurance. The final dimension is in a storage box and shows signs of wear due to age or use, which do not impair its function. • Type: Gauge block / Length-Normal • Nominal dimension: 100 mm • Material: steel • Design: magnetic • Magnet: integrated (2 magnetic surfaces visible) • Marking: \"100\" folded in • Storage: \"Plastic box\" Auction-ID: A7-46417-265

\"Test pin post 1–5 mm (4 individual sets)Richard Knauthe KG / KS SchmalkaldenTGL 13620/ICylindrical measuring pinsstep 0.05 mmTest pin post consisting of four individual sets in the range of 1.00 mm to 5.00 mm.Included are: • 1.00 – 2.00 mm • 2.00 – 3.00 mm • 3.00 – 4.00 mm • 4.00 – 5.00 mmThe first three sets are from Richard Knauthe KG, Limbach-Oberfrohna (TGL 13620/I).The 4-5 mm set is from KS Schmalkalden. Each set contains 21 pins in 0.05 mm increments.Supplied in wooden boxes or metal boxes (4–5 mm). Total measuring range: 1.00 – 5.00 mmGraduation: 0.05 mmTotal number of pins: 84 piecesStandard: TGL 13620/I (3 sets)Manufacturer: Richard Knauthe KG / KS Schmalkalden\" Auction-ID: A7-46417-290

\"Calibration gauge for tip calipers 0–500 mmCalibration gauge for tip calipers in a wooden case.The gauge is used to check and adjust tip calipers over defined test distances. Several reference dimensions are engraved on the bar. The design is made as a solid, ground steel strip with threaded holes on the sides for mounting or fixing. Engraved reference dimensions (visible):10 mm / 10.00 mm / 20.30 mm / 60.0 mm / 80.50 mm / 120.41 mm / 160.72 mm / 380.15 mmTotal length according to the tape measure approx. 500 mm. Type: Calibration gauge for tip calipersMeasuring range: up to approx. 500 mmMaterial: steel, ground Referencepoints: several engraved test distancesDesign: with threaded holes\" Auction-ID: A7-46417-334

Lot of two used gauge blocks for length testing and adjustment of measuring equipment.Included are:    •    1× Carl Zeiss Jena gauge block, TGL RGW 720/0, in plastic case    •    1× Gauge block from unknown manufacturers, in a wooden boxBoth sets are not complete, individual gauge blocks are missing.Condition:    •    u sed    •    signs of wear due to age and use Auction-ID: A7-46417-115

Standard: DIN EN ISO 3650Tolerance class: Class 1ID: 5392Condition • Used • Measuring surfaces visually good, with slight, normal traces of use • Wooden case with signs of wear and tear • Nominal dimension: 300 mm • Design: long-end dimension with through-holes • Material: steel • Tolerance class: 1 (precision measuring equipment)\" Auction-ID: A7-46417-206