Тип оборудования
(Количество: > 29)
Тип оборудования
(Количество: > 4)
Производитель:
(Категория: 1300)
Manometer, test manometer, pressure gauge with Bourdon tube, pressure-temperature measuring technology, Bourdon tube manometer, pressure tester, pressure tester -Manufacturer: Elektron, Manometer: 0-60 MPa / 0-600 bar, unused, original packaging -Size: Ø 100 mm -Number: 11x pressure gauges available -Price: per piece -Cardboard dimensions: 135/110/H50 mm -Weight: 0.7 kg/pc.
Demolition hammer, chisel hammer, Bosch hammer, mortising hammer-Length: 500 mm-Dimensions: Ø 25 x 500 mm-Weight: 1.5 kg
Compressor control, compressor control, control panel, control box, control unit-Manufacturer: Demag, compressor control from screw compressor type 350WS-Module: BT SBE 42008 TW-2294V-0-Individual components: see photos-Dimensions: 395/105/H25 mm-Weight: 0.3 kg
Demolition hammer, chisel hammer, Bosch hammer, mortising hammer-Length: 300 mm-Price: per piece-Quantity: 52 pieces-Minimum order: 3 pieces-Dimensions: 300/20/H20 mm-Weight: 0.6 kg/piece
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Cordless angle drill, cordless angle drill, -Manufacturer: Bosch, cordless drill type GWB 7.2 VE -incl.: charger -Quantity: 1x drill driver available -Price: per piece -Transport dimensions: 240/180/H240 mm -Weight: 6 kg
Air bellows, roller bellows, air cushions, spring-loaded brake-Gas bottle holder-for: 33.5/43.5 Lbs-Hole spacing: 115/75 mm-Weight: 3.2 kg
Rotary hammer, chisel hammer, combination hammer, Bosch hammer -Drilling/Chiseling -SDS Plus: Recording -Transport case -Weight: 5 kg
Oil-water separation system, condensate separator, oil and water separation apparatus, oil separator, oil/water separator, air compressor oil-water separator -Manufacturer: Jorc, oil-water separator -Type: AIRGROUP-SEP 30 -Dimensions: 970/440/H900 mm -Weight: 56 kg
Screw compressor, compressor, compressed air unit, stationary compressed air compressor-Manufacturer: Demag / CompAir, screw compressor type 350WS / EK285NK without drive motor-Volume flow: 35.1 m³/min-Max. pressure: 7 bar-Drive shaft: Ø 90 x 120 mm-Individual components: see photos-Dimensions: 1100/670/H1000 mm-Weight: 1032 kg
Granule dryer, compressed air dryer, granulate drying plant, adsorption dryer-Manufacturer: Zander, adsorption dryer type K1300MS-Operating pressure: 7 bar, max. 16 bar-Container capacity: 200 litres each-Individual components: see photos-Transport dimensions: 1250/750/H1960 mm-Weight: 684 kg
Air bellows, roller bellows, air cushions-Goodyear Air: Spring-Part Number: 1R11-703-Item no.: 56622270360000-Dimensions: Ø 258/263 mm-Weight: 12.15 kg
Lifting table, lifting platform, lifting platform, car lifting platform, scissor lifting platform, cleaning bridge, scissor bridge, lifting device, material lifter, lifting device-Manufacturer: Schmidt Handling, lifting device-Load capacity: 100 kg-Lifting height: 725 mm-Platform: 545 x 285 mm, tiltable-Dimension: 400/380 / H1260 mm-Weight: 205 kg
Manometer, test manometer, Bourdon tube pressure gauge, pressure-temperature measurement technology -Manufacturer: Wika, capsule pressure gauge, unused OVP -Type: 612.20.100 0 mbar...250 mbar -Art. No.: 9071687 -Screw connection: G1/2 B bottom -Number: 2x pressure gauges available -Price: per piece -Carton dimensions: 140/110/H55 mm -Weight: 0.6 kg/piece
Hydronic system, hydraulic station, membrane expansion vessel, compressed air tank, pressure vessel, pressure tank, compressed air tank, pressure tank,-electric heating-Manufacturer: Schniewindt-Type: 97/DF 15-Power: 15 kW-Connection: DN30 in stainless steel-permissible operating pressure:-centrifugal pump-Manufacturer: Tamel 2.2 kW-Number: 2x systems available-Price: per piece-Dimensions cabinet: 940/740/H1870 mm-Weight: 406 kg
Lifting table, lifting platform, lifting platform, car lift -Manufacturer: Nussbaum -Load capacity: approx. 1000 kg -Foot dimensions: 740 x 420 mm -Max. stroke: approx. 1600 mm -with control -Dimensions: 3200/1930/H450 mm -Weight: 494 kg
Tow hitch, trailer coupling, jaw coupling -Manufacturer: AL-KO, axle braked -Type: B 2000-4 -Brake: Type 3081 A -Brake drum: Ø 325 mm Recess Ø 160 mm / Bolt circle Ø 205 mm -Dimensions: see photos -Transport dimensions: 1750/660/H340 mm -Weight: 134 kg
two-arm drill, rotary drill, magnetic drill -Recording: MK2 -Nominal power input: 1150 W -Connection: 230 volts -Max. drill diameter: 23 mm -Dimensions: 460/320/H100 mm -Weight: 6 kg
Tire with rim-Tire size: 16.00 R20-Dimension: Ø 1320 mm-Weight: 246 kg
two-arm drill, rotary drill, magnetic drill -Recording: MK1 -Nominal power input: 400 W -Connection: 230 volts -Max. drill bit diameter: 15 mm -Weight: 7 kg
Compressed air filter, fine filter, filter, pre-filter, intake air filter, air filter housing, air filter housing, generator air filter-Air filter housing-for: filter donaldson XLP 18 2046-Inlet/outlet: Ø 150/149 mm-Price: per piece-Number: 1 piece-Dimension: Ø 355/595 mm-Weight: 12.35 kg
Hydronic system, hydraulic station, membrane expansion vessel, compressed air tank, pressure vessel, pressure tank, compressed air tank, pressure tank,-Content: ltr-Connection: 2 inches-permissible operating pressure: 1.5 bar-centrifugal pump-Manufacturer: EBARA type DWC-V500/1.5-Dimensions cabinet: 650/800/H1350 mm-Weight: 104 kg
Filter control valve, on-off valve, maintenance unit, water separator, filter bowl, pneumatic filter, filter regulator, service unit combination, filter control valve-Handover: in the current condition as seen-Maintenance unit: incomplete, see photos-Manufacturer: Festo, maintenance unit from CNC machining center Santenberg GTC S 2-Type: D-MIDI BD43 BO43 Individual components see photos-Pressure: max. 16/12 bar-Dimension: 530/105/H270 mm-Weight: 4.9 kg
Oil-water separation system, condensate separator, oil and water separator, oil separator -Oil-water separation system: oil and water separator -Dimensions container: Ø 500 x 755 mm -Dimensions: Ø 585 x 1145 mm -Weight: 31kg
Emulsion splitting plant, oil-water separation system The cost-effective and permanently reliable The solution to the problem is usually the oil/water- Separation for dispersed condensates. Purified water meets legal requirements Regulations for sewer discharge -Weight: 70 kg
Drill, rotary drill, magnetic drill, impact drill -Mounting: Drill chuck -Nominal power input: 500 W -Connection: 230 volts -Max. drill bit diameter: 16 mm -Transport case -Dimensions: 500/200/H110 mm -Weight: 9 kg
Magazine screwdrivers, drywall screwdrivers, automatic screwdrivers, automatic drill/drivers -Magazine screwdriver -280 W 0-1100 rpm -with suitcase -Number: 4 screwdrivers available -Price: per piece -Dimensions: 515/285/H75 mm -Total weight: 6 kg/piece
Hydronic system, hydraulic station, membrane expansion vessel, compressed air tank, pressure vessel, pressure tank, compressed air tank, pressure tank,-Content: ltr-Connection: 2 inches-permissible operating pressure: 1.5 bar-centrifugal pump-Manufacturer: EBARA type DWC-V300/1.1-Dimensions cabinet: 650/800/H1350 mm-Weight: 104 kg
Manometer, test manometer, pressure gauge with Bourdon tube, pressure and temperature measurement technology-Manufacturer: Wika, manometer-Type: 0 to 10 bar-Screw connection: see photos-Dimension: 100/50/H140 mm-Weight: 1,2 kg
