max. wheel diameter: 600 mmgear width: 500 mmmax. module: 15 min. module: 1 total power requirement: 2 kWweight of the machine ca.: 2 tdimensions of the machine ca.: 2x1,5x2 mThe rounding of the teeth is obtained by coordinating alternative movement of the cutter and rotary movement of the piece. The alternative movement of the cutter is obtained by rotating a cam, shaped in order to obtain radius or cusp rounding. A series of 4 cams allows to work modululus from 1 and 16 included. An regulation device allows change the modulus between the minimum and maximum value of every cam. The rotation of the piece is controlled by a three-stage gear wheel which forms the dividing system. The piece lock and the movement of the rapid entry of the cutter to the piece is controlled by pneumatic servo devices. The practicality and rapidity of the equipment, as well as the wide range of profiles availab ...
max. workpiece diameter: 100 mmmin. workpiece diameter: 10 mmworkpiece length: 1000 mmtotal power requirement: 16 kWweight of the machine ca.: 3 tdimensions of the machine ca.: 0 mThe guides have been outdated 10 years agoThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 350 mmy-travel: 250 mmz-travel: 300 mmControl: SINUMERIK 828 D distance spindle nose and table: 120 -420 mmsurface area: 520 X 300 mmtable weight: 100 KgT-slots: 5 T - slots distance: 45 mmT - slots - width: 12 mmturning speed range - milling: 0 - 10.000 U/minTorque: 33/41 0spindle drive: 7/8,5 kWTool taper: SK - 30 : 20 fachtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
round bar steel: 63 mmsquare edge steel: 55 mmflat steel: 100 x 25 mm: engine: 380 V, 6,3 kW weight: ca. 2.450 kgPlease note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pointing milling machine: für Stangen carbide turnover plates: 4 Stück working area: Rund, Profil+vierkant mmworking range: 80 (100) an 25 mmmilling drive: 380/420V, 18,5 KW, 50 Hz kWrevolutions per minute: Fräsantrieb: 1465 U/min: . clamping devices hydraulic pneumatic: hydraulisch infeed device: hydraulisch : ca. 5 lfdm x 300 mm : hydraulic power unit: Rexroth tank: 250 lcoolant tank: mit Spänekasten lcontrol panel: switchgear cabinet: mit Klimaanlage control: SIEMENS S 7-300 Please note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 1.200 mmy-travel: 600 mmz-travel: 675 mmControl: Heidenh.iTNC 620 HSCI FS table-size: 1.220 x 620 mm: 40 fachDistance between table and spindle: 735 mmturning speeds: 10.000 U/minspindle drive: 18 kWInternal cooling system: 30 bartotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m-Electronic steering wheel.-LINEAR RULES.-Laser probe measuring tools.-Preparation for piece measuring probes. PROBE NOT INCLUDED.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
X-ход: 530 мм Y-ход: 600 мм Z-ход: 300 мм0: 7 барРасход воздуха: 70-90 нл/мин.напряжение: 120/230 В + -5% кВАобщая потребляемая мощность: 1,5 кВтвес машины ок.: 22 тгабариты машины ок.:
Длина стола: 600 мм Ширина стола: 400 мм Ось X: 400 мм Ось Y: 300 мм Ось Z: 350 мм Размеры заготовок: 900 x 630 x 350 ммобъем: 490 лОбщая потребляемая мощность: кВтВес станка ок.: TРазмеры станка ок.:
x-ход: 550 мм-три года: 1200 ммз-ход: 450 ммконтроль: 85er 8бит выдачаймость к мощности: кВтвес машины ca.: tразмеры машины ca.: m
