Разное (436)

Выравнивание обуви L = 220 мм Ш = 140 мм H = 80 мм зазор шириной 30 мм

Coolant Pump - with container approx. 120 liters - Pump 0.8KW see pictures Auction-ID: A7-49782-478

Clamping angle Clamping area 400 x 400mm each See pictures Auction-ID: A7-49782-623

Multifix Steel Holder Size D1 6 pcs. Auction-ID: A7-49782-451

Clamping angle Clamping area 745 x 745mm each Footprint 745 x 500mm See pictures Auction-ID: A7-49782-626

Includes various accessories. Auction-ID: A1-49846-11

Auction-ID: A1-49846-71

4 pieces of SCHUNK parallel grippers (lot)4 pieces of SCHUNK parallel grippers, mixed sizes, dismantled from an automated system. ManufacturerSCHUNK GmbH & Co. KGTypesMPG+40-ASItem no.: 305522MPG+50Item no.: 305531A total of 4 grippers, of which:MPG+40-AS (at least 2 pieces)MPG+50 (at least 1 piece)1 additional gripper identical / same series Auction-ID: A7-49816-70

Clamping angle Clamping area each 900 x 11005mm Footprint 900 x 500mm See pictures Auction-ID: A7-49782-629

SCHUNK Swivel Unit SRU+30-W-180-3-4-M8 with 2× Gripper JGP 64-1 (used)Manufacturer: SCHUNKModel Swivel Unit: SRU+ 30-W-180-3-4-M8Model Gripper: JGP 64-1 (2 pieces, parallel gripping)Condition: used, fully functional at the timeof dismantling Assembly: completely pre-assembled unit (swivel unit + two grippers)Technical data:Swivel unit SRU+30-W-180-3-4-M8Swivel angle: 180°Size: 30Design: W variant (reinforced bearing)Damping: Level 3–4Connection thread: M8Compact, lightweight designPneumatically operatedgripper JGP 64-1Type: JGP Parallel gripperSize: 64Gripper stroke: typically approx. 6–8 mm (depending on model)Clamping force: approx. 700–900 N2-jaw gripperRobust, industrial-grade housingPneumatic driveMounted on both sides of the SRU rotary unit Auction-ID: A7-49816-34

Auction-ID: A1-49846-72

Auction-ID: A1-49846-70

SCHUNK Swivel Unit SRU+30-W-180-3-4-M8 with 2× Gripper JGP 64-1 (used)Manufacturer: SCHUNKModel Swivel Unit: SRU+ 30-W-180-3-4-M8Model Gripper: JGP 64-1 (2 pieces, parallel gripping)Condition: used, fully functional at the timeof dismantling Assembly: completely pre-assembled unit (swivel unit + two grippers)Technical data:Swivel unit SRU+30-W-180-3-4-M8Swivel angle: 180°Size: 30Design: W variant (reinforced bearing)Damping: Level 3–4Connection thread: M8Compact, lightweight designPneumatically operatedgripper JGP 64-1Type: JGP Parallel gripperSize: 64Gripper stroke: typically approx. 6–8 mm (depending on model)Clamping force: approx. 700–900 N2-jaw gripperRobust, industrial-grade housingPneumatic driveMounted on both sides of the SRU rotary unit Auction-ID: A7-49816-35

consisting of two HSK 63 mounts with an indexable insert cutter and a cutter head, various indexable insert cutters, indexable insertspartly in their original packagingReference: Alesco - Lot 50 Auction-ID: A7-49882-28

mainly the manufacturer GÜHRING and BOTEKin different designs and sizesincl. workbenchReference: Alesco - Lot 47 Auction-ID: A7-49882-25

consisting of various twist drills, reamers, milling cutters, tapsin different designs and sizesReference: Alesco - Lot 57 Auction-ID: A7-49882-34

consisting of 39 pieces, partly shrunk, partly normalincl. tool carrier systemReference: Alesco - Lot 46 Auction-ID: A7-49882-24

consisting of 40 pieces Reference: Alesco - Lot 42 Auction-ID: A7-49882-23

Serial number: 0177Operating voltage: 230 VFrequency: 50 HzReference: Alesco - Lot 100 Auction-ID: A7-49882-64

consisting of indexable insert milling cutters, boring rods, special DRILLMASTER carbide milling cutters - original packaging, cutter heads and indexable insertsReference: Alesco - Lot 49 Auction-ID: A7-49882-27

consisting of 52 piecesDimensions of the holder: 500 x 500 mmReference: Alesco - Lot 31 Auction-ID: A7-49882-17

Serial number: 0047Operating voltage: 400 VFrequency: 50 HzConnection: 7 kWAttention: it is explicitly pointed out that no function could be tested. Reference: Alesco - Lot 11 Auction-ID: A7-49882-9

consisting of 40 pieces, partly equipped with cutter heads and indexable insert milling cuttersReference: Alesco - Lot 41 Auction-ID: A7-49882-22

consisting of 23 pieces Reference: Alesco - Lot 48 Auction-ID: A7-49882-26

Serial number: 96/4013Operating voltage: 400 VConnection: 6 x 3600 WReference: Alesco - Lot 7 Auction-ID: A7-49882-5

Operating voltage: 230 VRated current: 10 AOutput: max. 2300 WReference: Alesco - Lot 3 Auction-ID: A7-49882-2

consisting of approx. 30 pieces, some equipped with cutting toolsReference: Alesco - Lot 20 Auction-ID: A7-49882-13

consisting of 46 piecesDimensions of the holder: 500 x 500 mmReference: Alesco - Lot 30 Auction-ID: A7-49882-16

consisting of different designs, partly in original packaging, partly used,different manufacturersReference: Alesco - Lot 53 Auction-ID: A7-49882-31

consisting of insert milling cutter, shrink sleeves, taps, twist drills, countersinksReference: Alesco - Lot 52 Auction-ID: A7-49882-30

Projection: approx. 1100 mmincl. mobile table topTable dimensions: 1000 x 600 mmwith two groovesReference: Alesco - Lot 83 Auction-ID: A7-49882-50

consisting of approx. 20 pieceswith a carbide cutterin different sizesReference: Alesco - Lot 51 Auction-ID: A7-49882-29

Auction-ID: A1-49174-2

Boring heads in different designs and sizes,mainly from the manufacturer KELCH, including a device for indexable inserts,as well as various clamping devices Auction-ID: A7-49089-31

consisting of HSK mounts with cutter heads, indexable insert cutters, carbide cutter heads, carbide disc cutters, normal milling cutters Auction-ID: A7-49089-15

in different designs and sizesfrom small to large, mostly internally cooled, various manufacturers, mainly SECO and SANDVIK Auction-ID: A7-49089-41

Pallets with various materials (garden tools, brooms, etc.) Auction-ID: A1-49365-162

Lot of machine tool accessories and spare parts stored on shelves, including tool holders, arbors, chucks, grinding wheels, fixtures, cables, small tooling and miscellaneous industrial spare parts. Sold as pictured. Auction-ID: A1-49190-35

consisting of various tips, tapers, centering tips, Multifix turning steel holder - mainly type: C32/170 as well as CD0170 and CD45170 Auction-ID: A7-49089-61

4th axle of SMW complete with drive of Fanuc A06B-6114-H103 Chuck 200mm Auction-ID: A1-49365-68

consisting of approx. 163 pieces, most of which are equipped with cutting tools such as milling cutters, drills, taps, internally cooled drills and boring toolsincluding the GARANT tool carrier system Auction-ID: A7-49089-207

Jaw width: 125 mmwith additional jawsReference: Option - Lot 66 Auction-ID: A7-49056-104

in different sizes and designs Auction-ID: A7-49089-5

consisting of approx. 33 pieces, mostly equipped with turning steels and insert holders, types: CD 45170, C40170 and C32/150 Auction-ID: A7-49089-362

Auction-ID: A1-48824-77

3 pieces of locked tool cabinets with unknown contents Auction-ID: A7-49302-59

Operating voltage: 100 - 240 VFrequency: 50/60 HzOperating pressure: 6 - 8 barincl. adapter for SK 40 tool holdersReference: Hanon - Lot 42 Auction-ID: A7-49056-18

Tool cabinet incl. accessories and tools for Mori Seiki Auction-ID: A7-49053-60

incl. indexable insert drill and indexable insert holder Auction-ID: A7-49089-365

in different sizes and shapesas well as a small batch of milling cutter Auction-ID: A7-49089-43