Used AOKI SBIII-250LS-50 blow molding machine - Year 2010Technical
Specifications & Performance DataUsed AOKI SBIII-250LS-50 blow molding
machine for industrial packaging and PET container production. This
machine is designed to form bottles from preforms, supporting
efficient bottle manufacturing as part of a used bottling line or an
independent container production operation.Manufacturer: AOKI
TECHNICAL LABORATORY, INC.Model: SBIII-250LS-50Year of manufacture:
2010Electrical supply: 3-phase AC, 220 V, 60 HzInstalled power: 50.2
kWCurrent: 165 AMachine weight: 10,400 kgHydraulic pressure: 14.0
MPaPneumatic pressure: 3.0 MPaWater supply pressure: 0.3 MPaAdvanced
Automation & Control SystemsThe AOKI SBIII-250LS-50 operates on a
3-phase AC electrical supply rated at 220 V and 60 Hz. Its 50.2 kW
power requirement and 165 A current rating should be considered when
planning electrical distribution, protection devices and control-panel
connection. Blow molding machines of this type are intended for
repeatable preform processing and controlled bottle forming in
industrial packaging environments.The machine uses hydraulic,
pneumatic and water services as part of its operating configuration.
These utilities support the forming process and should be connected
through suitably rated site installations.Production Line Integration
CapabilitiesThis AOKI blow molding machine can operate as the bottle
production stage of a PET beverage production line. It is typically
installed upstream of downstream bottling equipment such as rinsing,
filling, capping, labeling, secondary packaging and palletizing
systems. Bottle transfer, accumulation and conveyor interfaces should
be matched to the required production layout.As a second hand machine
for industrial packaging, it can support PET bottle supply for
beverage production and other packaging operations where preforms are
converted into finished containers before filling.Machine Condition &
Maintenance HistoryThe machine is identified as used and is offered as
a blow molding machine manufactured in 2010. Its substantial 10,400 kg
construction indicates a stationary industrial installation requiring
appropriate handling equipment during loading, positioning and
commissioning.Routine commissioning should include inspection of
electrical connections, hydraulic circuits, pneumatic supply lines,
water supply connections and all machine safety systems before
production use.Operational Performance & VersatilityThe SBIII-250LS-50
is intended for PET bottle manufacturing from preforms. In a bottling
equipment configuration, a blow molder provides the container supply
stage ahead of filling and packaging operations, helping coordinate
bottle availability with the production line’s filling demand.Its
utility requirements include hydraulic pressure of 14.0 MPa, pneumatic
pressure of 3.0 MPa and water supply pressure of 0.3 MPa. Stable
utility conditions are important for consistent machine operation in a
PET packaging process.Installation Requirements & Site
PreparationInstallation requires a 220 V, 60 Hz, 3-phase AC electrical
supply capable of supporting a 50.2 kW connected load and 165 A
current requirement. The site must also provide hydraulic,
compressed-air and water connections compatible with the stated
operating pressures.With a weight of 10,400 kg, the machine requires a
suitable prepared installation area, adequate floor load capacity and
lifting arrangements appropriate for industrial machinery. Utility
routing, access for service and connection to bottle-handling
conveyors should be planned before installation.Safety Standards &
Compliance CertificationThe machine identification plate displays a CE
mark. Blow molding equipment should be operated with all guards,
interlocks, emergency-stop devices and electrical protections in
proper working condition. Before commissioning, safety devices,
utility connections and operating safeguards should be checked as part
of the installation and start-up process.
