подкатегории
(уровень третий категории)
Производитель:
(Категория: 103)
x-travel: 1700 mmy-travel: 1200 mmz-travel: 1600 mmtable surface area: 1700x1200 mmturning speeds: 35-1800 U/minfeed: 20-1550 m/minSpindle: 300 mmthroat: 1200 mmThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 500 mmy-travel: 400 mmz-travel: 400 mmtotal power requirement: 3 kWweight of the machine ca.: 2 tdimensions of the machine ca.: 2 x 2 x 2 mNo. 2392Universal tool milling machineHERMLE UWF 801Working area: 500 x 430 x 400 mmDrive: 3 kWControl: TNC 135With manual control: Working area 520 x 450 x 410 mm,fixed table 800 x 400 mmTool holder SK 4018 spindle speeds from 40 - 2000 1/minFeed stepless x,y 4 - 1600 mm/minz 4 - 1000 mm/minDimensions 2.3 x 2.3 x 1.7 mWeight 1350 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 480/500 mmy-travel: 230/250 mmz-travel: 380/400 mmspeeds: 45 - 2240 U/mintable surface area: 1000 x 250 mmtool taper: SK 40 control: HEIDENHAIN TNC 124 total power requirement: 3 kWweight of the machine ca.: 1550 kgdimensions of the machine ca.: 2600 x 2200 x 1800 mm- horizontal + vertical milling spindle- Cooling device- swiveling table- Chip tray- Feed X/Y/Z - axis infinitely adjustable 8-1680 mm/min- Rapid traverse X/Y/Z - axis 4000 mm/min- Control HEIDENHAIN TNC 124- Operating hours: 4764 hours- Machine light- Machine feet- Operation manualThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 500 mmy-travel: 400 mmz-travel: 400 mmControl: Heidenhain TNC 113 total power requirement: 4 kWweight of the machine ca.: 1,5 tdimensions of the machine ca.: 222 mNo. 5152Universal tool milling machineDeckel FP 4 M (K) - 2203Working area: 500 x 400 x 400Drive: 4 kWSpindle holder SK 40 / DIN-2080Speed range 50 - 2,500 min-1Feed rates 8-630 mm/min steplessRapid traverse 1.3 m/minFixed table 800 x 460 mmChip trayHeidenhain TNC 113 Active Digital readoutSpace requirement approx. 2 x 2 x 2mWeight approx. 1,500 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 800 mmy-travel: 450 mmz-travel: 500 mmControl: CNC 332 / TNC 355 total power requirement: 5,5 kWweight of the machine ca.: 4 tdimensions of the machine ca.: ca. 3 x 3 x 2,5 mNo. 2213Universal tool milling machine MAHO MH 800 TWorking area: 800 x 450 x 500(800 longitudinal / 450 vertical / 500 transverse)Drive: 5.5 kWControl: Heidenhain CNC 332 / TNC 355Universal built-in rotary tableCoolant deviceChip traySplash guard half cabin, tool clampTechnical documentationTool holder ISO 40,Table clamping surface 600 x 900 m, max. table load 500 kg,quill stroke 80 mmSpeed range 63 - 3150 rpmFeed rate 1 - 1500 mm/minRapid traverse: 4.5 m/minWeight: approx. 4 tonsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 500 mmy-travel: 400 mmz-travel: 400 mmtotal power requirement: 4 kWweight of the machine ca.: 1,5 tdimensions of the machine ca.: 222 mNo. 5124Universal tool milling machineDECKEL FP 4MWorking area: 500 x 400 x 400Drive: 4 kWControl: 3-axis digital display HeidenhainSpindle holder SK 40 / M16Speed range 50-2500 min-1Feed rates 8-630 mm/minRapid traverse 1.3 m/minFixed table 800 x 460 mmChip traydocumentationSpace requirement approx. 2 x 2 x 2 mWeight approx. 1500 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-ход: 300 ммy-ход: 300 ммz-ход: 400 ммУправление: Dialog / Contour 3 общая потребляемая мощность: 4 кВтвес машины ок.: 1,5 тгабариты машины ок.: 232 мЦена упаковки: 3 x DECKEL FP 2 EXW бесплатный грузовикАртикул: 5267 FP 2 A Контур 35268 FP 2 A Контур 35290 FP 2 NC Диалог 2
x-travel: 2000 mmy-travel: 920 mmz-travel: 900 mmtable surface area: 2200 x 750 mmtable load: 3 tnumber of T-slots: 6 T - slots - width: 18 mmT - slots distance: 120 mmspindle taper: ISO 50 DIN 69871-B spindle speed max.: 3000 U/mintransmission ratio: 1 speeds infinitely variable range 1: 60 - 3000 U/minweight of the machine ca.: 21,6 tfeeds longditudinal/cross/vertical: 0 - 5000 mm/minrapid traverse: 15000 mm/mintotal power requirement: 38 kwweight of the machine ca.: 11 tPull studs DIN69872-B | IKZHours:Control on: 43036 hMachine on: 41311 hProgram run 13894 hThe machine is already dismantled The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-ход: 500 ммy-ход: 400 ммz-ход: 400 ммобщая потребляемая мощность: 4 кВтвес машины ок.: 1,8 тразмеры машины ок.: 222 м1 x UWF 700 Digi3 x UWF 801 TNC 135 + 1241 x UWF 802 MС момента ликвидации склада, частично не функционирует / нуждается в ремонтеЦена VHS / против предложени
x-travel: 700 mmy-travel: 370 mmz-travel: 350 mmtotal power requirement: 5,5 kWweight of the machine ca.: 3 tdimensions of the machine ca.: 2,5 x 2,5 x 2,5 mVertical milling machineSpindle ISO-40, Speed range 48-2100 1/min,feeds 10-1000 mm/min, rapid traverseSpace requirement approx. 2.5 x 2.5 m, Weight approx. 2.5 tonnes.Active digital readout Heidenhain TNC-114Table clamping surface 1000 x 400 mm,Coolant device.Working area: 700 x 370 x 350Drive: 4/5.5 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 1600 mmy-travel: 800 mmz-travel: 800 mmControl: CNC 432 total power requirement: 22 kWweight of the machine ca.: 17 tdimensions of the machine ca.: 5 x 3,70 x 3 mNr. 2754 Universal bed milling machine MAHO MH 1600 SSpindle SK-50,Speed range up to 4000 min-1Max. workpiece weight 3000kg35,000 switch-on hours,10,0 0spindle hours,Dimensions 5 x 3.70 x 3 m,Weight 16 tonnes.Automatic swivelling milling head,Fixed table 1800 x 980 mm,36-fold universal tool changer,Internal coolant supply with paper belt filter,chip conveyor, manual control bar.Working area: 1600 x 800 x 800Drive: 22 kWControl: Philips CNC 432The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-перемещение: 1200 ммy-перемещение: 400 ммz-перемещение: 400 ммобщая потребляемая мощность: 5 кВтвес станка ок.: 2,5 тразмеры станка ок.: 3 x 2 x 2 мNo 4427Универсальный инструментальный фрезерный станок DECKEL FP 4 L / 2707Рабочая зона: 1200 x 400Фиксированный угловой столУправление: 3-осевой цифровой дисплейВес ок. 3,5 тПотребность в пространстве 3 x 2 x 2
x-travel: 700 mmy-travel: 500 mmz-travel: 500 mmControl: CNC 432 total power requirement: 10 kWweight of the machine ca.: 4 tdimensions of the machine ca.: 3 x 3 x 2,6 mNo. 0052Universal tool milling machine MAHO MH 700 CWorking area: 700 x 500 x 450Drive: 10 kWControl: Philips CNC-432Fixed tableFully protected cabin with 3 sliding doorsTool holder: ISO-40.Speeds: 20-3150 min-1Feed rate: 1-3000 mm/min,rapid traverse 6 m/minThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 700 mmy-travel: 450 mmz-travel: 450 mmtotal power requirement: 4 kWweight of the machine ca.: 3,3 tdimensions of the machine ca.: 2 x 3 x 3 mNo. 1859Universal tool milling machine MAHO MH 800Working area: 700 x 450 x 450Universal built-in rotary table 1050 x 627 mm,quill feed gear 0.02-0.2 mm/revSpindle ISO-40,Speed range 32-1600 1/min,feeds 5-500 mm/min, rapid traverse 1.4 (0.7) m/min.Cross table movement by hand 225 mm,Table top rotation 360°Table swivels/tiltable +- 30° each.Space requirement approx. 2 x 3 x 3 m,Weight approx. 3.3 tons.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 300 mmy-travel: 160 mmz-travel: 340 mmtotal power requirement: 2 kWweight of the machine ca.: 1 tdimensions of the machine ca.: 1,5 x 2 x 2 mNr. 3287Universal tool milling machine DECKEL FP 1Working area: 300 x 160 x 340Control: Active digital displayDrive: 1.5 kWSpeed range 2000 rpmTool holder SK-40Rigid angled table 210 x 600 mmDocumentationOptional / available on request:- Universal table- counter holder- Rotary table Ø 380mm- Dividing headThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 410 mmy-travel: 310 mmz-travel: 400 mmtotal power requirement: 2,2 kWweight of the machine ca.: 1,2 tdimensions of the machine ca.: 222 mUniversal tool milling machineHERMLE UWF 700Spindle holder SK 40Speed range 40-2000 minSpace requirement approx. 2 x 2 x 2 mWeight approx. 1100 kgFor further data see attached PDFRigid table 700 x 285Horizontal milling machine vertical - milling head enclosed - partially rep. conditionedDocumentationWorking area: approx. 410 x 310 x 400Drive: 2,2Heidenhain digital displayThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 710 mmy-travel: 600 mmz-travel: 455 mmControl: Dialog 11 total power requirement: 7,5 kWweight of the machine ca.: 5 tdimensions of the machine ca.: 4 x 3,5 x 2,5 mNo. 4430Universal tool milling machineWorking area: 710 x 600 x 455 mmDrive: 7.5Control: Dialog-11 controlSpindle holder SK 40Speed range up to 6,300Fixed tableCabinCoolant containerSpace requirement see data sheetWeight approx. 5 tonsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 300 mmy-travel: 220 mmz-travel: 400 mmControl: Dialog 2 total power requirement: 1,6 / 2 kWweight of the machine ca.: 1,5 tdimensions of the machine ca.: 2,5 x 2,5 x 2,2 mNo. 5290Universal tool milling machine DECKEL FP 2 NC / 2801Working area: 300 x 220 x 400Drive: 1.6/2 kWControl: Dialog 2 contouring controlFixed table with chip traySpindle SK 40Speed range up to 3150 min-1Quill stroke 65 + 60 mmSpace requirement c.3 x 3.5 mTransport dimensions approx. 2 loading metersWeight approx. 1300 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 800 mmy-travel: 300 mmz-travel: 400 mmtotal power requirement: 3 kWweight of the machine ca.: 2,5 tdimensions of the machine ca.: 2,52,52 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-перемещение: 400 - 1600 ммy-перемещение: 250 - 800 ммz-перемещение: 350 - 800 ммУправление: ЧПУ вес станка ок.: 1,6 - 16 тразмеры станка ок.: - мMAHO - Упаковка со склада распродажа -Специальная цена на продажу4 фрезерных станка-MAHO MH 400 C - ЧПУ 432-MAHO MH 700 C - ЧПУ 432-MAHO MH 800 T - ЧПУ 332-MAHO MH 1600 S - ЧПУ 432 EXW - Франко-завод Bensheim / LorschБесплатный грузовик
x-travel: - mmy-travel: - mmz-travel: - mmtotal power requirement: - kWweight of the machine ca.: 1,3 tdimensions of the machine ca.: 1,51,52 mNo. 2510Universal milling machine Bridgeport ( type/design )Working area: table 1300 x 305Angle milling head with additional angle milling attachment and separate drive motor.Horizontal spindle MK-4,speed range 26-630 min-1,Angular milling head speed range 225 - 3385 min-1Feed range x/y 8.4-224 mm/min, z 3.1-85 mm/min.Space requirement approx. 1.5 x 1.5 m,Weight approx. 1300 kg.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle diameter: - mmx-travel: 1250 mmy-travel: 630 mmControl: Heidenhain TNC 426 / 430 total power requirement: 48 kWweight of the machine ca.: 12 tdimensions of the machine ca.: ca. 5 x 6 x 4 m mCNC jig boring machine / vertical machining centreoverhauled in 2000Spindle ISO 50,speed range 30-3000 min-1max. torque 522 Nmfeeds 3-2000 mm, rapid traverse 10 m/minmax. distance spindle nose - table surface 725 mmProjection spindle centre - stand 800 mm.Space requirement approx. 5 x 5 m,Weight approx. 12 tonnesThe machine was completely overhauled and modernised in 2000 with digital drives anddrives and Heidenhain controlFixed table 1200 x 71036-fold tool changer,coolant system,the pictured magnetic clamping table is not included in the scope of delivery ! -Working area: 1250 x 630 x 560Drive: 44 kWControl: Heidenhain TNC 426 PBThe data for this ad was created with ModulMWS - the software so ...
x-перемещение: 850 ммy-перемещение: 500 ммz-перемещение: 450 ммразмер стола: 1250x500 ммконус шпинделя ISO: 50 диапазон скорости вращения шпинделя: 35,5-1800 ед/минвес станка ок.: 5,2 тHEIDENHAIN TNC-355Разное аксессуары
5 осей Ось X 800 мм Ось Y 800 мм Ось Z 600 мм Диаметр интерференционного круга 1070 мм Расстояние шпинделя до 823,5 мм Нагрузка на стол 1000 кг Максимальная скорость перемещения по осям X/Y/Z при TCP макс. 75 м/мин Интерфейс режущего инструмента HSK-A63 Мощность мотор-шпинделя при CDF 25% макс. 50 кВт Крутящий момент шпинделя двигателя при CDF 25% макс. 187 Нм Вес машины 13000 кг Схема подключения: 2526-95-64934955 Система фильтрации Resy модель : 14-P00449-3 Серийный номер: KBF- 452/500 Устройство смены поддонов Erowa Модель RobotEasy Сер ...
Доступен вертикальный зубофрезерный станок с ЧПУ Pfauter. Модули мин./макс.: 1/3, макс. диаметр заготовки: 150мм, макс. ширина зуба: 150мм, наклон фрезерной головки: +/-45, расстояние между осью фрезы и осью стола: 10мм-160мм, диаметр стола: 160мм, отверстие стола: 63мм. Держатель инструмента: SK40, макс. диаметр фрезы: 130 мм, макс. длина фрезы: 220 мм, скорость: 600 об/мин, подача: 1500 мм/мин, тангенциальная траектория: 170 мм, быстрый поворот: 3 м/мин. Размеры машины X/Y/Z: ок. 4000 мм/3000 мм/2500 мм, вес: ок. 6500 кг. Возможен осмотр на ...
x-travel: 1050 mmy-travel: 650 mmz-travel: 400 mmtable surface area: 1200x350 mmturning speeds: U/minSpindle clamping, automatical: boring spindle: mm/min: The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Управление: Heidenhain 355 x-перемещение: 850 ммy-перемещение: 550 ммz-перемещение: 450 ммконус инструмента: гидравлические тиски SK50: документация: вес станка ок.: 5,5
x-travel: 550 mmy-travel: 350 mmz-travel: 400 mmtable surface area: 1130x330 mmnumber of T-slots: 5 T-slot - width: 14 mmH8T - slots distance: 63 mmnumber of tools: SK 40 quill stroke: 80 mmmilling-head swivable +/-: 180° total power requirement: kWweight of the machine ca.: 1,8 tdimensions of the machine ca.: mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this a ...
x-travel: 500 mmy-travel: 360 mmz-travel: 420 mmcontrol: Heidenhain 355 handwheel: tool taper: SK 40 weight of the machine ca.: 1,7 tPlease note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 1170 mmy-travel: 500 mmz-travel: 370 mmtable load: 2 tspindle turning speed range: 25 - 2500 U/minfeeds: 4 - 2000 mm/minrapid traverse:: 4000 mm/mintaper ISO: 40 total power requirement: 12,5 KVAweight of the machine ca.: 4 tdimensions of the machine ca.: 2,3 x 1,9 x 1,75 mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us Morethan 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the ...
