Производитель:
(Категория: 102)
расстояние по центру: 5000 мм диаметра по станку: 4000 мм диаметр зазора: 5000 ммшпиндельное отверстие: 104 мм скорость вращения: 1,4 - 71 (18x) U/минвыделенные требования к мощности: 30 кВтвес станка ca.: tразмеры станка ca.: m4-челюстная лицевая пластина 3.150 мммодулярный токарный станок!
диаметр лицевой панели: 1400 мм диаметр качения: 1600 мм высота поворота: 1200 мм диапазон скоростей поворота - фрезерование: 1 - 240 ЕД/минКонтроль: Siemens SIN 820T рам головка - поперечный ход: 1000 ммвыгодная мощность: 55 кВтвес станка ca.: размеры машины ca.: mA.T.C. 12 позицийИнструмен
диаметр поворота над упором слайда: 940 мм длина поворота: 10000 мм диаметр шпинделя: 1250 мм диаметр шпинделя: 105 мм скорость: 1,6 - 315 (x24) м/минвольтаж: 380 Ввыгодность к мощности: 75 кВтвес машины ca.: tразмеры машины ca.: m4-челюстная лицевая панельНасытная мощност
Площадь зажима инструмента: 200x55x195 ммвес: 0,01 т- Держатель инструмента Multifix, 5 шт. как новый, 2 шт. меньше использованный. --- цена за штуку ----
Детали машины Складской номер 1105-03364 Токарный станок типа «Свинец» и токарный станок с тягим Сделать КАЗНЕВ Тип HB 525 X 1000 Год постройки 1965 Обычный тип управления Складское помещение HAGUENAU Страна происхождения Франция Время доставки Немедленно Грузовая база EX СКЛАД Технические характеристики Диаметр поворота над сложем 500 мм Диаметр точной точки через опору 220 мм Длина точной 1000 мм Частота вращения шпинделя 25-2000 об/мин различные аксессуары YES Информация В ХОРОШЕМ РАБОЧЕМ СОСТО ...
turning diameter over bed: 320 mmturning diameter over slide rest: 220 mmturning length: 600 mmturning diameter in the gap: 320 mmturning speeds: 60 - 1650 U/mincentre height: 160 mmspindle bore: 38 mmtailstock quill taper MT: 3 MKconnected load frequency: 400 Vtotal power requirement: 1,1 kWweight of the machine ca.: 340 Kgdimensions of the machine ca.: 1,4 x 0,75 x 0,7 mCenter lathe with:3-jaw chuck 160 mm.4-jaw chuck 200 mm.Faceplate 200mmFixed bezelContinuous bezel4-way steel holder.Halogen machine lightChip tray, chip protection wallHardened and ground bed tracksLongitudinal and cross feedComplete coolant systemForage protectionSet of change gearsMachine toolsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 250 mmturning diameter over slide rest: 130 mmturning length: 700 mmturning speeds: 115 - 1620 U/mincentre height: 125 mmspindle bore: 27 mmtailstock quill taper MT: 2 tailstock quill stroke: 40 mmmetric threading: 0,2 - 3,5 mmthread - inch: 8 - 56 inch.thread - module: 0,2 - 12,5 mmswival range +/-: Oberschlitten 45 °connected load frequency: 400 Vtotal power requirement: 0,75 kWweight of the machine ca.: 0,15 tdimensions of the machine ca.: 1,41 x 0,61 x 0,41 mEquipped with- 2-axis digital measuring system with position indicator- manufactured according to DIN 8606- 27 mm spindle passage- adjustable guideways by adjustable strips- Strong engine with 0.75 kW- High resolution of the axis spindles for exact positioningDelivery:3-jaw chuck 100 mm, change gear set, splash guard 3-axisdigital measuring system fully assembled.The data for this ad was created with M ...
turning diameter over bed: 250 mmturning diameter over slide rest: 130 mmturning length: 700 mmturning speeds: 115 - 1620 U/mincentre height: 125 mmspindle bore: 27 mmtailstock quill taper MT: 2 tailstock quill stroke: 40 mmmetric threading: 0,2 - 3,5 mmthread - inch: 8 - 56 inch.thread - module: 0,2 - 12,5 mmswival range +/-: Oberschlitten 45 °connected load frequency: 400 Vtotal power requirement: 0,75 kWweight of the machine ca.: 0,15 tdimensions of the machine ca.: 1,41 x 0,61 x 0,41 mEquipped with- 2-axis digital measuring system with position indicator- manufactured according to DIN 8606- 27 mm spindle passage- adjustable guideways by adjustable strips- Strong engine with 0.75 kW- High resolution of the axis spindles for exact positioningDelivery:3-jaw chuck 100 mm, change gear set, splash guard 3-axisdigital measuring system fully assembled.The data for this ad was created with M ...
turning diameter over bed: 1300 mmturning diameter over slide rest: 900 mmturning length: 8000 mmspindle diameter: 153 mmtotal power requirement: 37 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
диаметр точения: 300 мм длина поворота: 1500 ммуправление: FanucSystem 6 T выдачайная мощность: кВтвес машины ca.: 5 тразмеры машины ca.: 4x2x1,5
turning diameter over bed: 1000 mmturning diameter over slide rest: 760 mmturning length: 5000 mmspindle bore: 82 mmturning speeds: 3,55-710 U/minfaceplate: 1000 mm3-jaw chuck: 500 mmsteady: 2 total power requirement: 22 kWweight of the machine ca.: 10 tdimensions of the machine ca.: 8x2x1,8 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle passage: 25 mmturning speeds: 5750 U/minRest: 4 turret head: 8 thread cutting attachment: bar loader: LNZ Hydrobartype: 6.26HS-4.4 total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle passage: 25 mmturning speeds: 5750 U/minRest: 4 straight turning atchm. - working travel: . mmturret head: 8 thread cutting attachment: bar loader: LNZ Hydrobartotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 2000 mmturning diameter over slide rest: 1050 mmturning length: 7000 mmspeed: 1,6 - 250 U/minvoltage: 380 Vtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle passage: 25 mmturning speeds: 5750 U/minRest: 4 straight turning atchm. - working travel: . mmturret head: 8 thread cutting attachment: bar loader: LNZ Hydrobartype: 6.32HS-4.4 total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 400 mmturning length: 600 mmcontrol: swing diameter: 600 mmspindle bore: 73 mmchip conveyor: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle passage: 25 mmturning speeds: 5750 U/minRest: 4 turret head: 8 thread cutting attachment: bar loader: LNZ Hydrobartotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 400 mmturning diameter over slide rest: 235 mmturning length: 1000 mmturning dia. in gap: 560 mmspindle bore: 52 mmspindle taper: Größe 6, DIN 55029 spindle turning speed - stepless: 18 - 2120 U/minfeeds - longitudinal: 0,015 - 0,6 mm/Uface feeds: 0,0075 - 0,3 thread - mm pitch: 0.25 - 7,5 mmthread - inch: 4 - 120 Gang / inch.tailstock quill diameter: 50 mmtailstock quill taper metric: MT 4 tailstock quill stroke: 120 mmmax. workpiece weight between centres: 500 kgvoltage: 400 V / 50 Hzspindle motor: 5,5 kWtotal power requirement: 7,5 kWweight of the machine ca.: 1,85 tdimensions of the machine ca.: 2,9 x 1,2 x 1,5 m• stepless adjustable turning speed via frequency converter, digital display,2-axe-DRO, Made:NEWALLThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 290 mmturning length: 850 mmswing diameter: 600 mmcontrol: Siemens type: 840 D mmspindle passage: 103 mmturning speeds: 3000 U/minlive tooling: 3000 U/minrapid travel - grinding spindle: 25 m/mintotal power requirement: 65 kWweight of the machine ca.: 11 tdimensions of the machine ca.: mOffer price without toolsOptionally, the accessories can also be purchased: 106 steel holders for indoor and outdoor use.External machining, 20driven tools(including 10 x angle tools) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 720 mmturning length: 4000 mmcontrol: Siemens 805 turn - diameter over facing slide: 360 mmspindle diameter: 100 mmspindle passage: 100 mm3-jaw-chuck diameter: 400 mm4-jaw-chuck diameter: 250 mmsteady: 360 mmtotal power requirement: 22 kWweight of the machine ca.: tdimensions of the machine ca.: m3- jaw chuck diameter: 400 mm 4- jaw chuck diameter: 250 mm Fixed bezel diameter: 360 mmIncludes: 4 jaw turrets and coolant.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 2100 mmturning diameter over slide rest: 1300 mmturning length: 6800 mmworkpiece weight: 25000 kgmain drive motor: 140 kWControl: Siemens type: 840 C faceplate: 1100 mmbed width: 2500 mmsteady: 800 mmsteady: 800 mmsteady: 800 mmsteady: 600 mmchip conveyor: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 302 mmturning length: 600 mmcontrol: Siemens type: 810 T tail stock: Tool changer: 12 Pos.tool taper: VDI 30 chip conveyor: 3-jaw-chuck diameter: 200 mmswing diameter: 400 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 460 mmturning diameter over slide rest: 274 mmturning length: 1000 mmturning dia. in gap: 690 mmspindle bore: 58 mmspindle turning speed range: 25-2000 U/minfeeds - longitudinal: 0,031-1,7 mm/Uvoltage: 400 V / 50 Hztotal power requirement: 5,5 kWweight of the machine ca.: 1,8 tdimensions of the machine ca.: 2,3 x 1,0 x 1,5 m• with 3- and 4- jaw chuck,• 2 axis-digital display NEWALL, • fixed and live steady,• Machine light.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 460 mmturning diameter over slide rest: 274 mmturning length: 1500 mmspindle bore: 58 mmspindle turning speed range: 25 - 2000 U/minturning dia. in gap: 690 mmmetric threading: 41 / 0,1 - 14 mmthread - inch: 60 / 2 - 112 inch.thread - module: 34 / 0,1 - 7 mmWhitworth-thread: 60 / 2 - 112 TPIadjustment of the upper slide: 140 mmdia. of quill: 60 mmquill stroke: 120 mmtotal power requirement: 5,5 kWweight of the machine ca.: 1,7 / 2,0 tdimensions of the machine ca.: 2,2 x 1,0 x 1,3 mA comprehensive range of quality centre lathes characterised by wide versatility,high accuracy and extremely rigid construction. The machines are well equipped with a multi-fix quick change tool post and 2-axis Newall digital readout fittedas standard and a variable speed option is available. Huvema lathes fullyconform to CE regulations. Also available in: 1,5m3 jaw chuck4 jaw chuckNe ...
turning diameter over bed: 360 mmturning diameter over slide rest: 220 mmturning length: 1000 mmturning dia. in gap: 515 mmspindle bore: 38 mmspindle turning speed range: 30 - 2200 U/minfeeds - longitudinal: 0,067 - 1,485 mm/Ufeeds - cross: 0,033 - 0,742 mm/Uvoltage: 400 V / 50 Hztotal power requirement: 2,5 kWweight of the machine ca.: 0,75 tdimensions of the machine ca.: 2,3 x 1,0 x 1,5 m• with 3- and 4- jaw chuck,• 2 axis-digital display NEWALL, • fixed and live steady,• Machine light.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 460 mmturning diameter over slide rest: 274 mmturning length: 2000 mmspindle bore: 58 mmspindle turning speed range: 25 - 2000 U/minturning dia. in gap: 690 mmmetric threading: 41 / 0,1 - 14 mmthread - inch: 60 / 2 - 112 inch.thread - module: 34 / 0,1 - 7 mmWhitworth-thread: 60 / 2 - 112 TPIadjustment of the upper slide: 140 mmdia. of quill: 60 mmquill stroke: 120 mmtotal power requirement: 5,5 kWweight of the machine ca.: 1,7 / 2,0 tdimensions of the machine ca.: 2,2 x 1,0 x 1,3 mA comprehensive range of quality centre lathes characterised by wide versatility,high accuracy and extremely rigid construction. The machines are well equipped with a multi-fix quick change tool post and 2-axis Newall digital readout fittedas standard and a variable speed option is available. Huvema lathes fullyconform to CE regulations. Also available in: 1,5m3 jaw chuck4 jaw chuckNe ...
turning diameter over bed: 1090 mmturning diameter over slide rest: 690 mmturning length: 5000 mmspindle bore: 146 mmspindle taper: DIN 55027/15 turning diameter in the gap: 1250 mmbed width: 700 mmquick change tool holder: Größe D1 spindle turning speed range: 3,5 - 1000, stufenlos U/minfeeds - longitudinal: 1-3000 mm/minfeeds - cross: 1-3000 mm/minrapid travel - longitudinal/face: 6000 mm/minthread - mm pitch: 0,5 - 480 mmthread - inch: 60 - 1/16 Gang / inch.thread - module: 0,125 - 120 voltage: 400 V / 50 Hzmain drive: 30 kWControl: total power requirement: 35 KVAweight of the machine ca.: 7,2 tdimensions of the machine ca.: 7,2 x 1,75 x 1,9 m• new heavy duty lathe with infinetely variable rotation speed via frequency converter,• at basic price with normal accessories according to list,• possible special acccessories according to separate make-up.The data for this ad was cre ...
turning diameter over bed: 460 mmturning diameter over slide rest: 274 mmturning length: 1000 mmspindle bore: 58 mmturning dia. in gap: 690 mmspindle taper: Größe 6, DIN 55029 spindle turning speed - stepless: 30 - 2000 U/minfeeds - longitudinal: 0,031 - 1,7 mm/Uthread - mm pitch: 0,1 - 14 mmthread - inch: 2 - 112 Gang / inch.tailstock quill diameter: 60 mmtailstock quill taper metric: MT 4 tailstock quill stroke: 120 mmmax. workpiece weight between centres: 500 kgvoltage: 400 V / 50 Hzspindle motor: 5,5 kWtotal power requirement: 6 kWweight of the machine ca.: 1,8 tdimensions of the machine ca.: 2,9 x 1,2 x 1,5 m• stepless adjustable turning speed via frequency converter, digital display,2-axe-DRO, Made:NEWALLThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 630 mmturning length: 200 mmcontrol: MTC K turning diameter over slide rest: 360 mmturning speeds: 1800 U/min3-jaw chuck: 315 mmHolder Multifix: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle passage: 25 mmturning speeds: 5750 U/minRest: 4 straight turning atchm. - working travel: . mmturret head: 8 thread cutting attachment: bar loader: LNZ Hydrobartotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
