Производитель:
(Категория: 102)
Gildemeister GM20, Country of origin: Italy, Operating hours: 0, Number of spindles: 6, Max bar diameter [mm]: 20, Auto bar loader: Cucchi Giovanni alternative IMG Easy load
turning diameter over bed: 400 mmturning diameter over slide rest: 280 mmturning length: 1000 mmturning diameter in the gap: mmturning speeds: 70 - 2000 U/mincentre height: 195 mmspindle bore: 54 mmtailstock quill taper MT: 3 MKconnected load frequency: 400 Vtotal power requirement: 2,2 kWweight of the machine ca.: 0.85 tdimensions of the machine ca.: 1,95 x 1,0 x 1,75 mProfessional industrial machine3-axis digital display3-jaw chuck 200 mm.4-jaw chuck 200 mm.Faceplate 280mmBezel fixedBezel rotating4-fold steel holder.Halogen machine lightMachine lightFoot brakeremovable chip tray, chip protection wallHardened and ground bed railsComplete coolant systemFeed protectionMachine feetMachine toolThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
faceplate diameter: 0 mmturning diameter over slide rest: 900 mmturning length: 1.000 mmtotal power requirement: 25 kWweight of the machine ca.: 8 tdimensions of the machine ca.: mHeight of centres 550 mmMax. turning Æ 1200 mmMax. turning Æ over slides, approx. 900 mmMax. turning length, approx. 1000 mmSpindle bore, approx. 90 mm24 spindle speeds 4.3 - 587 rpm Feeds, infinitely variable 1 - 170 mm/minTotal load, approx. 25 kW - 380 V - 50 HzWeight, approx. 8000 kgAccessories/specialitiesTwo separate slides, each equipped with 2-coordinate copyingequipment, program controlled by plugboard, strengthened bearingsand spindle, hardened an ...
turning diameter over bed: 250 mmturning diameter over slide rest: 140 mmturning length: 550 mmturning speeds: 50 - 2000 U/mincentre height: 125 mmspindle bore: 26 mmtailstock quill taper MT: 2 MKtailstock quill stroke: 65 mmconnected load frequency: 230 Vtotal power requirement: 1,1 kWweight of the machine ca.: 0,15 tdimensions of the machine ca.: 1,3 x 0,6 x 0,65 mBenchtop lathe 3-axis LCD digital display system fully assembled.Longitudinal feed.3-jaw chuck 125 mm.4-jaw chuck 125 mm.Clamping plate.4-way steel holder.Clock for thread cutting.Drip trayHardened bed tracks.Emergency stop switch.Forage protectionSet of wheels.Appropriate tools.Base cabinet is optionalThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
диаметр поворота: 250 ммдлина поворота: 450 ммуправление: TX8D отверстие: 80 ммскорость вращения шпинделя: 3150 у/мин.Токарный станок с ЧПУ с подачей прутка и 3 револьверными головкамиОчень большое отверстие шпинделя, с устройствомзагрузки прутка Пожалуйста, запросите более подробную информацию.
turning diameter: 250 mmturning length: 400 mmcontrol: C 200 / 8 total power requirement: 60 kWweight of the machine ca.: 8,5 tSwing Ø above bed, max. 300 mmMax. turning Ø for chucking work, approx. 250 mmTravel of Slides:Turret 1, X / Z travel 163 / 550 mmTurret 2, X / Z / Y travel 140 / 250 / 260 mmSpindle bore, approx. 65 mmTool holder bore 30 mmSpindle speeds 25 - 5,000 rpmFeed range 0 - 15,000 rpmSpindle drive 0.5 - 40 kWTotal electrical load 60 kW - 380 V - 50 HzWeight, approx. 8,500 kgAccessories / Special Features SIEMENS CNC Continuous Path Control, Model 880 (INDEX C 200-8) for at least 6 axes, with enlarged memory and with subprograms, simulation, etc. Double column loading device for large workpieces, mounted above the machine. With 3-jaw gripper and storage system for blanks and finished parts, integrated in the CNC control. Spindle indexing and pos ...
turning diameter over bed: 250 mmturning diameter over slide rest: 130 mmturning length: 550 mmturning speeds: 50 - 2000 U/mincentre height: 125 mmspindle bore: 20 mmtailstock quill taper MT: 2 tailstock quill stroke: 60 mmmetric threading: 0,4 - 3,0 mmthread - inch: 10 - 44 TPIthread - module: 0,2 - 12,5 mmconnected load frequency: 230 Vtotal power requirement: 1,0 kWweight of the machine ca.: 0,12 tdimensions of the machine ca.: 1,09 x 0,59 x 0,45 mEquipped with- 20 mm spindle passage- adjustable guideways- Powerful 1.0 kW motor- continuously variable speedScope of delivery:- 3-jaw chuck 100 mm,- 4-jaw faceplate chuck 125mm- standing and rotating bezel- Splash guard- Feed protectionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
workpiece diameter: 25-90 mmthreading length: 3000 mmthread pitch: 2-16 mmtotal power requirement: 25 kWweight of the machine ca.: 10,5 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 250 mmturning length: 100 mmcontrol: SIEMENS 840 D total power requirement: 35 kWweight of the machine ca.: 7500 kgdimensions of the machine ca.: mE M A G (Germany)Vertical CNC Controlled Hard Turning and Grinding machinewith tool turret and workpiece handling SystemModel VSC 250 DS Year 2004 # M7 28.69324_______________________________________________________Turning Ø, max. 250 mmTurning length internal / external 100 mmWorkpiece length min./max. 29 – 100 mm6-positon tool turret Ø / swing-Ø 480/790 mmWorkpiece spindle Slide travel, X / Z / stroke 680 / 400 / 200 mmFeed rate / Quick feed X/Z 45/30 m/min.Feed force X/Z ...
turning diameter: 400 mmturning length: 915 mmcontrol: NUM Type 1062 T total power requirement: 12,5 kWweight of the machine ca.: 5500 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 300 mmturning length: 710 mmcontrol: SIEMENS SINUMERIC 840 total power requirement: 40 kWweight of the machine ca.: 6000 kgdimensions of the machine ca.: mI N D E X (Germany) CNC Controlled Slant-Bed Chuck Lathe with Turret and Tailstockand INDEX CNC Control C 200 – 4 (SIEMENS)Model G 300 Year 1995 S/N 5000 65_____________________________________________________________Turning - Ø, with chuck, max. 300 mmSpindle bore 90 mmMax. Workpiece Swing dia. 400 / 590 mm Turning length / travel of turning slide, (X-Achse) max. 710 mmTurret head slide cross movement (Z-Axis) max. 140 mmTurret with 12 tool holder positions DIN 30 mmFeed range of turret slide / ...
turning diameter: 150 mmturning length: 500 mmcontrol: total power requirement: 4 kWweight of the machine ca.: 0,8 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 200 mmturning length: 400 mmcontrol: SIEMENS SINUMERIC 840 C total power requirement: 40 kWweight of the machine ca.: 6.500 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 250 mmturning diameter over slide rest: 140 mmturning length: 550 mmturning speeds: 125 - 2000 U/mincentre height: 125 mmspindle bore: 26 mmtailstock quill taper MT: 2 MKtailstock quill stroke: 65 mmconnected load frequency: 230 Vtotal power requirement: 0,75 kWweight of the machine ca.: 0,135 tdimensions of the machine ca.: 1,25 x 0,6 x 0,6 mSpeed in 6 levels 125 - 2000rpm.3-jaw chuck 125 mm.4-jaw chuck 125 mm. (Independent)Fixed bezel.Revolving bezel.4-fold steel holder.chip tray.back panel.spindle protection.Hardened bed rails.Longitudinal feed with left / right switching.Set of change gears.Associated Tools.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 320 mmturning diameter over slide rest: 200 mmturning length: 900 mmturning diameter in the gap: 320 mmturning speeds: 75 - 2000 U/mincentre height: 160 mmspindle bore: 38 mmtailstock quill taper MT: 3 connected load frequency: 400 Vtotal power requirement: 1,5 kWweight of the machine ca.: 0,4 tdimensions of the machine ca.: 1,6 x 0,75 x 1,7 mSINO digital display3-jaw chuck 200 mm.4-jaw chuck 200 mm.Faceplate 250mmbezel fixedQuick-change steel holder with 4 pcs. steel holdermachine lightChip tray, chip protection wallHardened and ground bed trackslining protectionmachine tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Мы продаем токарный станок Haas ST-20 от имени клиента. Станок был установлен и никогда не использовался продуктивно., - Параметры управления, - Пакет опций, - Поток охлаждающей жидкости под высоким давлением, - Комплект принадлежносте
Диаметр поворота: 60 ммДлина поворота: 200 ммКоличество ползунов: общая потребляемая мощность: 20 кВтВес станка прибл.: тРазмеры станка ок.:
turning diameter: 42 mmturning length: 250 mmcontrol: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mCNC-lathe with bar feedwith Sameca bar feed The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
многошпиндельный брус автоматический, Mori Say 8/42 - ГОД 2006, КОНФИГУРАЦИЯ, - Муфта HIRTH для блокировки барабана, - 8 передних салазок и 8 радиальных салазок, - 4 салазки Compond на станциях 1, 2, 5, 6, - Загрузчик прутков CUCCHI Pietro (2007), - Комплект для загрузчика прутков CUCCHI BLT BUNDLE (2018), - Шпиндель подборщика, гидравлический в поз. 8, - подготовка к отводу масляных газо
- neu aufgebaut, neue Elektrik in 2018, - Schnecken-Späneförderer, - Ölnebelabsaugeinrichtung, - Kühlmittelfilter, selbstreinigend, - Doppelschlitten in Lage 6 zum Abstechen und Rückseitenbearbeitung, - Polygondreh- und Gewindefräseinrichtung Lage 4, - CNC-Kreuzschlitten AUTOR in Lage 5, - Abgreifspindel, hydraulisch in Lage 6, - Transportband für Fertigteile, - Stangenlader Iemca PRA
8-шпиндельный токарный станок, Количество шпинделей: 8
Gildemeister G20, 6-Spindel-Portal-Drehautomat, GILDEMEISTER 20, Maschine komplett überholt, Elektrik - neu, PLC – neu, Mechanik - generalüberholt -, Geometrieprotokoll – wie Neumaschine –, CE – Konformitätserklärung, einschl. elektrische Standardausrüstung, Grundausstattung der Maschine:, 1 Tippbetrieb zum Einrichten, 1 automatische Zentralschmiereinrichtung, 1 Kühlmitteleinrichtung einschl. Pumpe und Antrieb, Behältervolumen ca. 650 L, 1 Werkzeugspindelführungsblock, 1 Antriebsgruppe für rotierende Werkzeugspindeln einschl. Gewindeschneidgetriebe für jede Werkzeugspindelposition wahlweise:, - a) Gegenläufig zum Schnellbohren, - b) Synchronlaufend, - c) Zum Gewindeschneiden bzw. Reiben, 2 Planschlitten mit unabhängigen Planvorschub, 4 Kreuzschlitten mit unabhängigem Plan- und, (Längsvorschub als Option) + 1 Maschinen-, leuchte, 1 Paar Wechselräder für Spindeldreh ...
turning diameter: 1250 mmswing diameter: 1160 mmturning height: 800 mmfaceplate diameter: 1000 mmtotal power requirement: 97 kWweight of the machine ca.: 25000 tdimensions of the machine ca.: mP I T T L E R (Germany)CNC Controlled Vertical Turning and Milling CentreWith Tool Changer and Pallet ChangerModel PV 1250 / 1-1 Year 1994 _______________________________________________________Turning Ø max. 1,000 mmSwing Ø max. 1,160 mmTurning length 800 mmX Axis - horizontal 1,300 mmY Axis - vertical 800 mmFeed / quick feed 16,000 mm/minMain spindle speeds 10 - 1,000 rpm !Main spindle speeds via separate C Axis 0.1 - 16 rpmPositioning accuracy of C Axis 360° + / - 5 Tool holder ISO 50Tool drive 22 kWMax. torque / spindle speed 315 Nm / 2,500 rpmPallet size 630 x 630 mmSpindle drive ...
Многошпиндельный токарный станок Schütte 32, полностью восстановленный компанией GWM-Tech, двигатели переменного тока Fanuc, двигатели FANUC для нарезания резьбы, ПЛК, патрон для шпинделя, загрузчик прутков Cucchi Pietro
Количество шпинделей: 6, Максимальный диаметр прутка [мм]: 25, Скорость вращения шпинделя [об/мин]: 4.250, Вес станка ок. [кг]: 7.150, Автоматический загрузчик прутка: Cucchi BLT Multi F-6
3 slides 3 revolvers with 12 positions each driven main and subspindle 2 C-axis Y axis, workpiece unloading device, high pressure coolant system with paper filter chip conveyor, Control: Fanuc 310i, Country of origin: Italy, Operating hours: 34.000 | 22.900, Number of spindles: 2, Number of linear axis + C axis: 8+2, Max bar diameter [mm]: 65, Spindle speed [rpm]: 5.000, Spindle motor [kW]: 20, Auto bar loader: Iemca Master 880 P/R, Machine weight approx. [kg]: 9.000
Mori Say TM626 AC, 5 осевых салазок, 4 поперечных суппорта, двойная ползун поз. 6, шпиндель подборщика, транспортер стружки с вибрационным фильтрующим устройством, система подачи СОЖ под высоким давлением, комплект держателей инструмента, автоматический загрузчик прутков L = 3 м, Страна происхождения: Чехия, Количество шпинделей: 6, Максимальный диаметр прутка [мм]: 26, Скорость вращения шпинделя [об/мин]: 500 - 6.000, Двигатель шпинделя [кВт]: 20, Общая потребляемая мощность [кВА]: 40, Вес машины ок. [кг]: 5.500, Ав ...
Управление: Fanuc 310 i, Максимальный диаметр прутка [мм]: 25, Количество линейных осей + ось C: 6 + 2, Скорость вращения шпинделя [об/мин]: 10.000, Двигатель шпинделя [кВт]: 3,7, Z - ход [мм]: 80 | 300, X - ход, мм: 50 | 240, Y - ход [мм]: 350 | 120, Подача СОЖ под высоким давлением: 20 бар, Автоматический загрузчик прутков: FMB Turbo 3-26/3200, Вес машины ок. [кг]: 3.800
Гидравлический шпиндель подборщика поз. 6, Сцепление для нарезания резьбы, Автоматический погрузчик прутков: Pietro Cucchi
