Производитель:
(Категория: 101)
Magnetic drill, hand drill-Magnetic base: Magnetor type PS 32 L-Drilling machine: AEG type HBE-IV- Recording: MK2-Max. Drill: Ø 23 mm -Connection: 265V/200Hz-Dimensions: 700/300/H670 mm-Weight: 49 kg
Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter, extension sleeve, reducing sleeve, cone sleeve, adapter sleeve, spindle sleeve-Manufacturer: Artykuly Techniczne, adapter sleeve: Morse taper sleeve MK6/5-Type: PTPk-6/5-Dimensions: Ø 64/130 mm-Weight: 1.5 kg
travel -x axis:1000 mmtravel -y axis:500 mmtravel -z axis:610 mmturning speed range:8000 1/minweight:5,5 to.control:HEIDENHAIN iTNC 530 tool change unit:24 Pos.Tool bore:SK 40 table-size:1.200 x 500 mmmax. table load:850 kgtotal connected load:37 kWspace requirements approx. LxWxH:2,65 x 2,1 x 2,9 mvertical machining center,internal coolant supply,direct measuring system,prepared for 3D-touchprobe (without touchprobe),chioconveyorapprox. 21.200h "machine on", approx. 1.300h "spindle on"
Multi-spindle head, drill beam, multi-spindle drill head, articulated multi-spindle head, row drilling machine, dowel drill head, dowel drilling machine, drilling gearbox -Number: max. 3x drill bits -Recording: M8 -right/left: rotating alternately -Drill bit spacing: 32 mm -Number: 1x drill heads available -Price: per piece -Dimensions: 140/75/H95 mm -Weight: 3 kg
: neu : 3935 : ca. 10 Wochen ab Auftrags : Spanien : 18150 €: 348.48 €: 50 mm: MK 4 : 400 mm: 54 - 1032 (9) U/min: 2.9 kW: M36 : 600 mm: 1200 mm: 2500 mm: 710 kg: 0,1 / 0,2 / 0,3 / 0,4 mm/U: 230 mm: 200 mm: 50 - 850 mm: 1290 mm: 550 x 550 mm: 1060 x 600 mmERLO(MADE IN SPAIN)FOR MANUFACTURING USEHigh quality gear drilling machinecooling equipmentVDE electricchuck protectionleft right drillinglightingfront handwheel for sensitive feedtable turn and tiltableuser manual in GERMANOPTIONS (PRICES ON REQUEST): manual tapping systemIR/IRS electronic speed variator with digital read out VE+TAK digital read out for drilling depth LBCALTERNATIVE:ERLO B-50 VERSION WITH ELECTROMAGNETIC CLUTCH PRICE ON REQUESTThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel:2600 mmy-travel:1100 mmz-travel:900 mmtable surface area:3200 x 1100 mmrotary table diameter:1050 mmtable load:1,2 tcontrol:Heidenhain iTNC 530 ergoline 19" turning speeds:20 - 10.000 1/mintaper ISO:SK 50 max. torque on the spindle:288 / 187 Nmtool change unit:60 Pos.rapid traverse:40 m/minspindle:44 / 32 kWweight of the machine ca.:25 tdimensions of the machine ca.:6,70 x 3,40 x 2,95 m5-axis universal machining center,rigid table with integrated NC-rotary table left side and B-axis in milling head,direct measuring system,internal Coolant 40 bar, coolant tank 600 l,Swarf Conveyer Rotoclearairblast through spindle,3D Touch probe HEIDENHAIN TS 649,mode 4,prepared for 3D quick set (software yes, hardware no),new milling spindle in 2022 at 25.584happrox. 60.000 h machine ON, approx. 31.000 h Programm ON in total
travel:1300 mmlength:670 mmwidth:625 mmcontrol:Heidenhain TNC 620 spindle turning speed range:12000 1/mintable load:1300 kgtool change unit:40 Pos.spindle taper ISO:SK 40 spindle:17 / 10 kWdimensions of the machine ca.:3,35 x 2,60 x 3,10 mweight:8,5 t:40 kVArapid traverse:36 / 36 / 30 m/minvertical machining center,touch probe RENISHAW OMP 40-2,coolant tank 325 l / incl. 20 bar high pressure pump (internal coolant supply) air through spindle,el. handwheel,oil-mist suction,chipconveyor, flush gun,approx. 13.000h "machine on", approx. 3.000h "spindle on"inspection under power in factory is still possible
: neu : ca. 6 Monate ab Auftragse : Taiwan : 39200 €: 748.72 €: 50 mm: MK 5 : 350 - 1.600 mm: 56 - 1.450 (12) U/min: Stahl/Guß: M40/M50 : 2670 mm: 1120 mm: 2410 mm: 3300 kg: 465 - 1.420 mm: 0,06 - 0,2 (3) mm/min: 3.7 kW: 320 mm: 270 mm: 2.550 x 970 x 200 mm: 1,5 kW: 630 x 500 x 500 mm: 2760 mm: 0,75 kWleft/right rotationautomatic feeddrilling depth limitmanual headstock adjustment with hydraulic clampingelectric height adjustment of extension arm andhydraulic clampinghydraulicclamping of swivel movement of extension armcentral operation panel on the front sidepower load readout for drilling spindlehand wheel for spindle fine feedcoolant equipmentmachine lampbox tablemachine and equipment according to the CE-regulationsoperating manual in GERMAN and ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Drilling machine, drill press, pillar drill, column drill -Condition: Working -Note: Clamping table repair-welded, see pictures -Manufacturer: Flott, column drill type SB 15 -Spindle mount: MK2 -Motor: 0.525 kW -Speed adjustment: via V-belt -Speed speeds: 215 - 400 - 730 - 1250 - 2300 - 4300 rpm -Table size: 220 x 220 mm -Spindle holder: MK2 with drill chuck -Travel: 360 mm -Spindle stroke: 55 mm - Throat: 295 mm -Column Ø: 100 mm -Accessories: collecting tray for coolant -Dimensions: 930/700/H1805 mm -Weight: 190kg -Handover: in current condition as seen
x-travel:8500 mmy-travel:2000 mmz-travel:1500 mmrapid travel x/y/z:25 m/mintable-size:10.000 x 1.350 mmtable load:max. 5 t/qmuniversal head:orthogonal 1° x 1° tool taper:SK 50 milling head speed:4.000 1/minpower capacity:37 kWmax. torque on the spindle:900 Nminternal coolant system feed:15 barcontrol:HEIDENHAIN iTNC 530 Tool changer:60 Pos. total power requirement:75 KWdimensions of the machine ca.:12,7 x 5,2 x 4,6 mweight of the machine ca.:35 tuniversal travelling column - universal machining center,orthogonal milling head, water-cooled, with 1° indexing in 2 axis (360 pos. in rear layer, 270 pos. in front layer)3D touch probe M&H 20.41,dividing wall for 2 table machining,internal air blast,15bar high pressure pump,prepared for HSC milling heads incl. torque support,moveable operator-cabin/panel,chipconveyor,handwheel HR 410,controlled security fence,miscellaneous accessories (angle ...
Drill press, bench drill, column drill, pillar drill-Manufacturer: TOS, high-performance column drilling machine type 40 TF / C-Motor: MEZ 2.2 kW-Speeds: 56 - 2240 rpm-Table size: 400 x 315 mm, travel 600 mm-spindle taper: MK4-Spindle stroke: 165 mm-Projection: 290 mm-Pillar Ø: 140 mm-Dimensions: 1200/650 / H1990 mm-Weight: 602 kg
handheld terminal, handheld control device, operating unit, control panel, operating panel, operating unit, operating device, programming device-Manufacturer: Siemens, Simatic S5 operator panel-Type: OP 393 III 6ES5393-OUA 15-Protection class: IP 50-Number: 2x control unit available-Price: per piece-Dimensions: 148/320/H55 mm-Weight: 0.7 kg/piece
Multi-spindle head, multi-spindle drilling head, drilling gear -Manufacturer: Perske, multi-spindle drilling head with drive -Drilling head: 18 spindles -Drill spacing: 32 mm -Stroke: 50 mm -Drive: DSB 1306/2 1.8 kW 2800 rpm -Collets: Ø10 mm -Number: 2x multi-spindle drilling head with drive available -Price: per piece -Dimensions total: 800/200/H575 mm -Weight: 67 kg/piece
x-travel:1000 mmy-travel:1100 mmz-travel:810 mmcontrol:iTNC 530 HEIDENHAINturning speeds:18000 1/mintool taper:HSK 63 table surface area:1.000 x 800 mmmax. swing dia.:1350 mmmax. table load:1.000 kgtool magazin::273 Pos.rapid traverse:60 m/mintotal power requirement:86 kWweight of the machine ca.:18 tdimensions of the machine ca.:4,3 x 6 x 3,4 m5-axis simultan universal machining center,NC-rotary-table (C-axis) and B-axis (milling head),DDT-spindle for high torque (HT - max. 3000 rpm - 291/226Nm) and high speed (HS max. 18.000 rpm - 83/63Nm ),- internal coolant supply 50bar with chipconveyor and paperfilter,el. handwheel,oilmist suction,DCM collision control,Hours on counter:approx. 45.000h "machine on", approx. ca. 2.000h " HT-spindle on", approx. ca. 12.000h " HS-spindle on"NEW SPINDLE IN 09/2025 !
Drill, pillar drill, column drill, column drilling machine -Manufacturer: Super Condor, pillar drill type 20 22 -Engine: unfortunately no type designation -Speed: Gearbox V-belt 8-speed -Table size: 255 x 255 mm, travel 670 mm -Spindle holder: MK2 -Spindle stroke: 120 mm -Feed device: yes -Projection: 205 mm -Column Ø: 100 mm -Dimensions: 830/380/H1730mm -Weight: 205 kg with pallet
Computer monitor, screen, TFT industrial monitor, flat screen, industrial monitor touchscreen-Manufacturer: Pro-face, industrial monitor flat screen touchscreen-Type: FP3710-T42-U-Article No.: PFXFP3710T2AU-Model: 3580406-01-Dimensions: 475/120/390mm-Weight: 10.4 kg
Multi-spindle head, drill beam, multi-spindle drill head, articulated multi-spindle head, row drilling machine, dowel drill head, dowel drilling machine, drilling gearbox -Number: max. 11 drill bits -1x drill bit: Left-hand rotation, 33 mm spacing -1x drill bit: right-hand rotation, 41 mm spacing -Recording: M8 -right/left: rotating alternately -Drill bit spacing: 32 mm -Dimensions: 380/95/H90 mm -Weight: 8 kg
новый
: neu : 2024 : 3983 : prompt, Zwischenverkauf v : Spanien : 7400 €: 142.82 €: 1 : 1 : 32 mm: MK 3 : 250 mm: 65 - 125 - 185 - 365 - 54 U/min: 1,8 / 2,6 kW: M24 : 600 mm: 640 mm: 2020 mm: 260 kg: 100 mm: 85 - 635 mm: 1.170 mm: 300 x 270 mm: 600 x 380 mm: 120 mmERLO (MADE IN SPAIN)FOR DEMANDING WORKSHOP USEgeardrive machinemanual feedleft-right drillingtable with t-slotsdepth adustable endtool ejectordrill guardCE normsuser manual in GERMAN(sample photo)OPTIONS (PRICES ON REQUEST):lighting equipmentcoolant equipment and machine base with T-slotsreverse for tappingDELIVERY TIME WITH OPTIONS APPROX. 6 WEEKS.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Control unit, control panel, control panel, control unit, keyboard, screen, control-Two-hand control panel with: foot switch-Dimensions: 460/370/H920 mm-Weight: 18 kg
Machine reamers, reamer, reaming tool, locating knife cutting set -Various sizes: Ø 13-33 mm -various: recordings -Sale: only complete set -Weight: 7.2 kg
Multi-spindle head, drill beam, multi-spindle drill head, articulated multi-spindle head, row drilling machine, dowel drill head, dowel drilling machine, drilling gearbox -Number: max. 3x drill bits -Recording: M8 -right/left: rotating alternately -Drill bit spacing: 32/40 mm -Dimensions: 150/100/H100 mm -Weight: 3 kg
Drill press, drill press, stand drill, pillar drill-Table size: 500 mm-spindle taper: MK4-Projection: 400 mm-Speeds: 38-750 rpm-Feed: 0.08-0.13 mm/rev-Columns: Ø 220 mm-Spindle stroke: 235 mm-Transmission:-Dimensions: 640/1020/H2730 mm-Weight: 965 kg
Drilling machine, bench drill, pillar drill, column drill -Manufacturer: Webo, pillar drill -Motor: 0.37 kW -Translation: via flat belt -Table size: 295 x 295 mm -Drill chuck: 0 - 10 mm/B12 -Spindle stroke: 70 mm -Protrusion: 150 mm -Column Ø: 80 mm -Dimensions: 500/700/H1800 mm -Weight: 244 kg
Unused, handbook available
Handpieces, for flexible shaft machine, quill machining unit, drilling machine, drilling machine, pillar drill, multi-spindle drilling machine, row drilling machine, dowel drilling machine -Manufacturer: Suhner -Drawing No.: 010 281 02 -without: drive -Hole: Ø 14 mm -Quantity: 5 pieces available -Price: per piece -Dimensions: 140/33/H33 mm -Weight: 6 kg/piece
Multi-spindle head, drill beam, multi-spindle drill head, articulated multi-spindle head, row drilling machine, dowel drill head, dowel drilling machine, drilling gearbox -Number: max. 3x drill bits -Recording: M8 -right/left: rotating alternately -Drill bit spacing: 32 mm -Dimensions: 95/60/H120 mm -Weight: 6 kg
Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter, extension sleeve, reducing sleeve, cone sleeve, adapter sleeve, spindle sleeve-Morse taper sleeve/adapter sleeve MK4/2-Dimensions: Ø 31 x 125 mm-Weight: 0.4 kg
50 € 
