подкатегории
(уровень третий категории)
Производитель:
(Категория: 109)
Clamping plate, marking-out plate, measuring plate, measuring table, welding table, welding table, straightening plate -Width: 1515mm -Length: 1725mm -Height: 865mm -Plate thickness: 30 mm -Plate is with: support ribs -Center bore: 100 mm -Right and left recess: 55 x 1385 mm -Number: 1x plate available -Transport dimensions: 1725/1515/H865 mm -Weight: 2200kg
Chuck flange, flange mount, lathe chuck flange, driving flange-Chuck flange for: three-jaw chuck, four-jaw chuck, face plate-Admission thread: M96 x 6 mm-Flange width: 42 mm-Dimensions: Ø 495 x 115 mm-Weight: 60 kg
Faceplate, faceplate chuck, four-jaw chuck, face turning chuck -Faceplate: Chuck size Ø 560 mm -Photo: Short cone 11 -Bolt circle: Ø 235 mm -Through hole: Ø 140 mm -T-slot: Slot width 22 mm -Weight: 109 kg
clamping head, dead-collet chuck, collet sleeves, collet, tool holder, tool holder, milling chuck, milling tool, clamping sleeves-Clamping sleeves: 10 pieces-Diameter: Ø 6 - 16 mm, see photos-Price/Delivery: complete-Transport dimensions: 145/60/H70 mm-Weight: 1.2 kg
fixed center, fixed punch center, fixed Morse taper, fixed center point, center points-Fixed center point: Morse taper MK4-Number: 2x centering tips available-Price: per piece-Dimensions: Ø 32 x 160 mm-Weight: 0.8 kg/piece
Clamping plate, welding table, welding table, straightening plate-Diameter: 1240 mm-Height: 975 mm-Plate thickness: 18 mm-Groove scale: 18 different diameters-Weight: 478 kg
Clamping plate with T slots, T-slot plate, punching table, clamping plate, plate field,-Clamping plate: punching table for hydraulic press, eccentric press-Clamping surface: 700 x 600 mm-Opening: 250/250 mm-Plate height: 205 mm-Dimensions total: 700/600/H205 mm-Weight: 207 kg
Gear, gears, spur gear-Gear: 35 teeth-Shaft mount: inside Ø 60 mm-Measurements: see drawing in the photos-Dimensions: Ø 368 x 78 mm-Weight: 16 kg
Height gauge, parallel gauge, height measuring device -Altitude gauge: Altimeter -Max. working height: 1000 mm -Dimensions: 280/160/H1100 mm -Weight: 7 kg
Step chuck, precision chuck, bell chuck, step collet, ring chuck, collet sleeves, collet, tool holder, tool holder, collet sleeves -Manufacturer: Schaublin, Step Collet Ring Chuck -Hole: Ø 25 mm (see photos) -Size: 22 to 87 mm -Dimensions: Ø 96 x 110 mm -Weight: 1.1 kg
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws-Top jaws: Jaw set for three-jaw lathe chucks, hard-Jaw width: 16 mm-Dimensions: see photo technical. drawing-Quantity: 1x set of interchangeable jaws available-Total dimensions: 52/49/H41 mm-Weight: 0.4kg/set
Chuck flange, flange mount, lathe chuck flange, driving flange-Chuck flange for: three-jaw chuck, four-jaw chuck, face plate-Outer diameter: 315 mm-Hole circle: Ø 280/Ø 16 mm-Dimensions: Ø 315/H95 mm-Weight: 18.5 kg
Area lighting, floodlight, workshop lamp, lamp, hall lamp, hall lighting, pendant lamp, industrial lamp-Power: 150 watts-Number: 13x lights available-Price: per piece-Dimensions: 390/320/H310 mm-Weight: 7.1 kg/piece
Three-jaw chuck, 3-jaw chuck-Chuck size: Ø 200 mm-Passage: Ø 54 mm-Rezess: Ø 159 mm-Hole circle: 176 mm-Weight: 14.2 kg
Micrometer screws, micrometer screws, outside micrometers, outside micrometers-Manufacturer: TESA, outside micrometer-Measuring range: 25-50 mm-Reading: 0.01 mm-locking device-other sizes: also available-Case dimensions: 180/80/H30 mm-Weight: 0.4 kg
Tool holder, milling tool holder -Adapter -Recording: SK50 -Recording tool: 2x MK3 1x MK2 -Drill chuck reducing sleeves spindle tool -Price/Sale: complete -Weight: 9 kg
Key bar chuck, power chuck, three-jaw chuck, three-jaw lathe chuck-Manufacturer: Forkardt, wedge bar chuck type F 400 without clamping jaws-Chuck size: Ø 400 mm-Bolt circle: mm-Through hole: 102 mm-Total dimensions: Ø 400 x 125 mm-Weight: 90 kg
Tool holder, milling holder, collet holder, collet chuck, chuck, milling tool, adapter, clamping unit, tool holder, collet sleeves-Milling holders: SK30 3 pieces-Type: various versions, see photos-Price/Delivery: complete-Transport dimensions: 150/65/H145 mm-Total weight: 1.8 kg
Machine vise base plate, clamping plate, vice plate, turntable-with: T- round groove-Grad display-Dimensions: 235/175/H50 mm-Weight: 6 kg
Pipe sealing cushions, leak sealing cushions, sealing plate, pipe sealing, breakthrough sealing-Pipe sealing cushions-Outer/inner diameter: 390/320 mm-Height: 20 mm-Hole circle: Ø 352/11 mm-Delivery of: steel/stainless steel cover plates possible-Number: 30x pillows available-Price: per piece-Weight: 1 kg/piece
Face plate, face plate chuck, four-jaw chuck, facing chuck-Chuck size: Ø 450 mm-Flange: Ø 102 mm-Hole circle: Ø 135 mm-Through hole: Ø 80 mm-Weight: 74 kg
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws-Top jaws: Jaw set for three-jaw lathe chucks, hard-Jaw width: 34 mm-Dimensions: see photo technical. drawing-Total dimensions: 131/102/H80 mm -Total weight: 5,4 kg
face driver, face driver, face driver, driver tip, face driver, face driver -Manufacturer: Lenze ABW, face driver -Type: MS4 -Front dimension: Ø 45 mm -Recording: MK4 -Total dimensions: Ø 57 x 178 mm -Weight: 1.4 kg
Machine vice base plate, clamping plate, vice plate, turntable -with: T-round groove -Dimensions: 330/240/H40 mm -Weight: 10kg
Shaft vice, machine vice-Clamping diameter: 95 mm-Dimensions: 290/200/H225 mm-Weight: 24 kg
Collet holder, tool holder, tool holder, milling holder, milling tool-Adjustment: SK50-without adapter sleeves-Manufacturer: Gewefa-Type: 05.006.003/3-32Ø-Weight: 3.4 kg
Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring machine, T-slot plate, pallet changer -T-slot plate: clamping plate 500 x 500 mm -Inner diameter: 180 mm -Plate height: 75 mm -Groove width: 18 mm -Groove spacing: 280 mm -Dimensions: see drawing in the photos -Dimensions total: 500/500/H75 mm -Weight: 128 kg
Tool holder, milling holder, milling tool-Adapter-Take: SK40-Tool holder: MK2-with: CNC pull studs-Bore chucks, flat chucks, reducing sleeves, cutter heads, shell end mills, spindle tools-Number: 8x recordings available-Price: per piece-Total length: 230 mm-Weight: 1.2 kg/piece
tool holder, milling holder, milling tool, adapter, Weldon-Manufacturer.Gewefa, spindle tool type SK50x49x300-M24-Hole: SK50/ Ø 29 x 300 mm-Total dimensions: Ø 98 x 440 mm-Weight: 7.0 kg
Turning device, forging device, welding turning device, welding device-for: production of spirals, springs ...-Holder: Ø 88 x 300 mm-Speed: 31 rpm-Drive: 1.5 kW-Voltage: 400 V-Dimensions: 1000/550/H1200 mm-Weight: 120 kg
