подкатегории
(уровень третий категории)
Производитель:
(Категория: 109)
clamping plate, marking plate, measuring plate, measuring table, straightening plate, marking plate, test plate, control plate,-Clamping plate: surface plate, marking plate-Size: 415 x 250 mm-Height: 60 mm-Dimensions: 415/250/H60 mm-Weight: 45 kg
fixed point, fixed center point, fixed Morse taper, fixed center point -Toe: shaft-mounted -Photo: see pictures -Weight: 1 kg
Boring head, spindle head, drilling head, grooving drill head, grooving head, spindle drilling head, boring head, spindle tool-Take: SK40-Diameter: 120-170 mm-Tool total length: 300 mm-with: CNC pull studs-Number: 3x spindle tools available-Price: per piece-Weight: 7 kg
Clamping plate, milling support, plate field, welding table, welding table, plate boring mill, clamping angle, clamping cube, clamping devices, clamping supports, clamping tool, clamping box, clamping tower-Clamping block: for workpiece clamping-Width: 140 mm-Length: 370 mm-Height: 53 mm-Threaded holes: M12-Number: 4x milling support available-Price: per piece-Weight: 21 kg/piece
Tubular heater, heating tape, heating sleeve, mica heater, cylinder heater, heating cylinder, ceramic heating tape-Manufacturer: Erge, heating tape heating sleeve-Type: Ø150 x 160 mm-Item no.: 840 853 65-Heating power: 2450 W-Voltage: 220V-Number: 2x heating tape available-Price per piece-Dimensions: 215/170/H160 mm-Weight: 2.1 kg
Steel holder, clamping plate with T-slot -Support length: approx. 75 mm -Clamping height: up to approx. 30 mm -with: adjusting screw -Dimensions: 150/55/107 mm -Weight: 2.5 kg
Workbench, work table, assembly bench, assembly table, work table -Workbench: solid construction -Worktop: Steel plate, length 3300 mm -Base cabinet: 5 doors, 3 with drawers / Layout/height see photos -Transport dimensions: 3300/750/H920 mm -Weight: 638 kg
Pipe Cushion, Leakproof Cushion, Sealing Plate, Pipe Sealing, Breakthrough Sealing -Rohrdichtkissen -Outside / inside Ø 94/43 mm-Height 19 mm -Delivery of steel / stainless steel cover plates possible -Weight 0.1 kg
Dial gauge, zero adjuster, zero adjuster, zero adjuster-Manufacturer: Holex, zero adjuster type 359085-Measurement accuracy: 0.01mm-Box dimensions: 165/120/H60 mm-Weight: 1.5 kg
Three-jaw chuck, three-jaw lathe chuck-Chuck size: Ø 240 mm-Throughout: Ø 77 mm-Weight: 18 kg
Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Mouth size: Ø 200 mm -threaded mounting -Through hole: Ø 53 mm -Weight: 19.7 kg
Thread cutting head with Strehler jaws, thread cutting die, Thread cutting machine, pipe thread cutting -inch thread: 1/4-1 inch -Weight: 5.5 kg
Clamping plate with T-slots, plate field, welding table, welding table, plate boring machine, T-slot plate, -T-slot plate: clamping plate with solid base frame -Length: 1350 mm -Width: 1150 mm -Plate thickness: 100 mm -Plate: with support ribs -Groove width: 26 mm -Groove spacing: 110 mm -Dimensions total: 1350/1150/H825 mm -Total weight: 1000 kg
gear, gears, gear shaft, pinion shaft, spur gear, spur gear-Gear shaft: straight-toothed pinion shaft-Gear: Diameter Ø 67 mm / 30 teeth-Shaft mount: inner Ø 36 mm-Dimensions: see photo technical drawing-Quantity: 1x gear shaft availableTotal dimensions: Ø 67 x 45 mm-Weight: 0.4 kg
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Rotary jaw set for four-jaw chuck, hard -Jaw width: 34 mm -Dimensions: see photo technical drawing -Overall dimensions: 130/136/H80 mm -Total weight: 7.0 kg
Faceplate, faceplate chuck, four-jaw chuck, facing chuck-Face plate: chuck size Ø 500 mm-Receptacle: short cone 8 (Ø 136-139 mm)-Hole circle: Ø 172 mm-Through hole: Ø 80 mm-Groove width: 20 mm-Weight: 86 kg
Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet -Tool cabinet: Drawer cabinet, sturdy design -11 drawers: See photos for layout/height -lockable: without key -Dimensions: WDH 720/730/H1000 mm -Weight: 238 kg
Counter holder, counter bearing, bearing block, pillow block, bearing for milling machine-Dovetail: 110 by 135 mm-Drawing: in the photos-Dimensions: 210/90/H220 mm-Weight: 8.6 kg
Cutter head, milling holder, carbide cutter, indexable cutter, face milling head, milling head, cutter head shell milling cutter, face milling cutter-Manufacturer: Seco, Secodex face milling cutter head SK50-Type: Secodex 220.17-0063-Recording: SK50-Cutter head: Ø 63 mm / 3 carbide inserts-Total dimensions: Ø 97 x 230 mm-Weight: 3.6 kg
gear, gears, spur gear -Gear: Spur gear 30 teeth -Shaft mounting: Inner Ø 42 mm -Dimensions: see photos -Overall dimensions: Ø 80 x 60 mm -Weight: 0.9 kg
measuring stand, tripod, dial gauge holder, test stand, micrometer holder, dial gauge stand, magnetic measuring stand, dial gauge stand-Measuring stand: Dial gauge holder-Recording: see photos-Dimensions: 185/80/H545 mm-Weight: 5.3 kg
fixed center, fixed live center, fixed morse taper, fixed center, center-Fixed center point: Mount Morse taper MK6-Dimensions: Ø 64 x 280 mm-Weight: 5.4kg
Collet chuck, tool holder, tool holder, milling chuck, milling tool-Collet holder: MK3-Bore: Ø 30 mm-Total dimensions: Ø 60 x 168 mm-Weight: 1.0 kg
Collet holder, tool holder, tool holder, milling holder, milling tool-Manufacturer: Clarkson, 3 pieces collet holder-Type: Autolock-Adjustment: SK50-Tension sleeves: Ø 10/12/25 mm-Price: complete-Dimension total: 250/250/100 mm-Total weight: 14 kg
Tool holder, milling chuck, collet chuck, collet chuck, chuck, milling tool, adapter, clamping unit, tool holder -Manufacturer: Eroglu, milling chuck surface clamping chuck SK40 -Type: SK 40-12-50 DIN 2080 01150P500688 -Milling tool holder: Ø 12 mm -Dimensions: Ø 63 x 144 mm -Weight: 1.0 kg
Steel pipes, flushing pipes -Diameter: 1070 mm -Wall thickness: 15 mm -Length: 4,350 mm -Weight: 403.2 kg / m
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws-Top jaws: for three-jaw lathe chucks, soft-Jaw width: 20 mm-Dimensions: see photos-Total dimensions: 85/60/H40 mm-Total weight: 1.0 kg
Three-jaw chuck, 3-jaw chuck-Chuck size: Ø 200 mm-Admission recess: Ø 168 mm-Passage: Ø 55 mm-Weight: 12 kg
grinding stone, grinding pin -Recording: M12 -Outer diameter: 65 mm -Length: 67 mm -Radius: 30 mm -Sale: only complete set -Weight: 38 kg
Collet chuck sleeves, collet chuck, tool holder, tool holder, milling holder, milling tool, clamping sleeves-Number: 32 pieces adapter sleeves-different: sizes and manufacturers-Sale: only as a package
