Модель
(Производитель: FREUTEK)
100 € Description: Digital workshop gauges 600X100X0,01 IP66 protection - Hardened stainless steel Shockproof PVC case Reading 0.01 or 0.0005 'mm / inch - preset - ABS - water resistant , dimensions (l x w x h) approx.: 885 x 295 x 50 mm, weight approx.: 5 kg
50 € Description: Professional analogue outdoor micrometer with range of application 0-25mm, resolution 0.01 mm. The positive spindle lock holds the anvils in place to ensure accurate measurement registration. High-quality construction combined with easy handling makes this type of analogue micrometer particularly suitable for control operators, workshop technicians, repairers and service personnel. It is supplied in a wooden case for storage and easy transport. , dimensions (l x w x h) approx.: 160 x 60 x 3 mm, weight approx.: 1 kg
2.902 € Description: High quality fixed speed screw compressor, for professional use, with CE certification. Outlet pipe G3/4, 65 db - Pressure BAR 8 - Capacity 1,59 m3/min , dimensions (l x w x h) approx.: 1,120 x 940 x 1,270 mm, weight approx.: 350 kg
100 € Description: The WDN0003 automatic edgebander has been designed for the hot use of pre-glued tapes for finishing linear and shaped panels. Thanks to this technology, the thickness between the edge and the panel is practically non-existent, allowing an excellent finish. Quick to register and start. In just 2 minutes the machine is ready to work. Product of the Italian brand Freutek, it is made with a scratch-resistant worktop and sturdy sheet metal structure, equipped with an automatic feeder. It is equipped with a powerful 3.95 kW motor for working. The Freutek WDN0003 is complete with protection against accidental burns for maximum safety during processing, it is equipped with a height-adjustable edge guide, rubber pre-belt roller, double flat scrapers on both sides of the panel and excess edge trimmer. Edge thickness 0,8 - 2 mm. Panel thickness min/max. 12/43 mm. Feeding speed 7 m/min. ...
100 € Description: The WDN0004 automatic edgebander has been designed for the hot use of pre-glued tapes for finishing linear and shaped panels. Thanks to this technology, the thickness between the edge and the panel is practically non-existent, allowing an excellent finish. Quick to register and start. In just 2 minutes the machine is ready to work. Product of the Italian brand Freutek, it is made with a scratch-resistant worktop and sturdy sheet metal structure, equipped with an automatic feeder. With double scrapers for a clean and glue-free result. Automatic facing of the front and rear excess edge. Equipped with auxiliary rollers located on the working base to obtain an optimal pressure of the panel on the gluing unit. it is equipped with a powerful 3.59 kW motor for working. The Freutek WDN0004 is complete with protection against accidental burns for maximum safety during processing, it ...
100 € Description: High quality fixed speed screw compressor, for professional use, with CE certification. Outlet pipe G3/4, 65 db - Pressure BAR 8 - Capacity 0,99 m3/min , dimensions (l x w x h) approx.: 960 x 720 x 1,020 mm, weight approx.: 250 kg
100 € Description: High quality fixed speed screw compressor 30kW 40HP, for professional use, with CE certification. Outlet pipe G1 1/4, 75 db - Pressure BAR 8 - Capacity 4,72 m3/min , dimensions (l x w x h) approx.: 1,230 x 1,350 x 951 mm, weight approx.: 643 kg
50 € Description: TAPS AND DIES SET 40 pcs. Professional set made of heat treated steel alloy. Taps and dies suitable for making threads on mild steel and aluminum. Supplied with key for taps and tapping bits. Protective case for transport and to always have them in order. , dimensions (l x w x h) approx.: 330 x 260 x 170 mm, weight approx.: 2 kg
595 € Description: The tapping machine is servo driven, with intelligent torque protection, to overcome the traditional limitations of lathe, drilling or manual tapping. Boasting advanced mechanical design, with a variety of processes using in-mold casting, the overall stiffness is strong, durable, non-deformable. The high definition touch screen is simple and intuitive. It can perform vertical and horizontal work of complex and heavy parts, locate quickly and process accurately. Continuous speed change, manual, automatic, with three different working modes. Auto mode can effectively control the touch depth, without the operation button, automatic control by depth controller. Fast repeated positioning, tapping speed, high production efficiency. Voltage: 220V / 50HZ Power: 600W 0-312RPM TAP RANGE: M3-M16 COLLET: M3, M4, M5, M6-8, M10, M12, M14, M16 , dimensions (l x w x h) approx.: 610 x 6 ...
50 € Description: TAPS AND DIES SET 40 pcs. Professional set made of heat treated steel alloy. Taps and dies suitable for making threads on mild steel and aluminum. Supplied with key for taps and tapping bits. Protective case for transport and to always have them in order. , dimensions (l x w x h) approx.: 330 x 260 x 170 mm, weight approx.: 2 kg
100 € Description: 6 tool holders, brand Freutek type HSK63F ER32-80, balanced, up to 25,000 rpm, new packaged, lubricated in sealed bag and single pack. , dimensions (l x w x h) approx.: 500 x 100 x 100 mm, weight approx.: 8 kg
50 € Description: Professional cone remover for BT-40/HSK63F, allows the disassembly of the cones with precision without damaging the surface and balancing of the cone and tool. , dimensions (l x w x h) approx.: 210 x 120 x 120 mm, weight approx.: 2 kg
100 € Description: 6 Freutek ISO30-ER32 tool holder cones, balanced, up to 30,000 rpm, new packaged, lubricated in sealed bag and single pack. , dimensions (l x w x h) approx.: 330 x 260 x 170 mm, weight approx.: 5 kg
100 € Description: Collet Chuck Tool holder SK40-ER25-100. DIN69871, G2.5 25000 rpm. Mat: 20CrMnTi 0,003. Set 5 pcs , dimensions (l x w x h) approx.: 380 x 75 x 197 mm, weight approx.: 8 kg
210 € Description: Grinding is accurate and rapid, easy operation with no skill to grind. With diamond grinding wheel, it can be equipped directly with an accurate angle and long service life. The electrically controlled and powerful DC motor: stable frequency, strong horsepower and long service life. Bearing shaft and locking unit. The machine is set up with the function of adjusting a point (central point) size, which can effectively coordinate with the material of drill hole and the rotation speed. It can control the quality precision and prolong the service life of the drill bit. Standard with CBN grinding wheel for the HSS material, Optional SDC grinding wheel for the carbide material. Grinding Range:Φ3-Φ13, Point Angle:100°~135°, Power:AC220V, Motor:120W, Speed:4400rpm, Dimension:32x18x19 cm, Weight:9kg, Standard Equipment:Grinding wheel:CBN (for HSS)×1, Eleven collets:Φ3,Φ4,Φ5, ...
100 € Description: Collet Chuck Tool holder SK40-ER32-100. DIN69871, G2.5 25000 rpm. Mat: 20CrMnTi 0,003. Set 5 pcs , dimensions (l x w x h) approx.: 380 x 75 x 197 mm, weight approx.: 9 kg
261 € Description: Applying to make untreatment parts of machine, mould shelf which is not easy to move. It is convenient and easy to operate. It is easy to replace stand tungsten steel quadrilateral edge, and can use an old cutter. It is accurate and with perfect surface. The max. chamfering range is 2mm to 3mm everytime. Chamfering angle: 15°- 45°, Speed: 2800rpm, Power: 380V/50HZ/3 phase/750W. , weight approx.: 13 kg, dimensions (l x w x h) approx.: 380 x 240 x 245 mm
100 € Description: Chuck for self-centering lathe 3 + 3 jaws 80mm, body in ground cast iron, closing with helical ring, concentric manual clamping, tempered jaws , dimensions (l x w x h) approx.: 150 x 150 x 155 mm, weight approx.: 2 kg
421 € Description: Portable idiot end mill sharpener is accurate and rapid, easy operation with no skill to grind. Can grind 2-flute, 3-flute, 4-flute end mill. With diamond grinding wheel, it can be equipped directly with an accurate angle and long service life. Standard with SDC grinding wheel for the Carbide material. Grinding Range:Φ4-Φ14, Point Angle:0°~5°, Power:220V, Motor:160W, Speed:4400rpm, Standard Equipment:Grinding wheel:SDC (for carbide material)×1, Six collets:Φ4,Φ6,Φ8,Φ10,Φ12,Φ14 , weight approx.: 15 kg, dimensions (l x w x h) approx.: 350 x 250 x 250 mm
100 € Description: Chuck for self-centering lathe 3 + 3 jaws 100mm, 3500 r/min, body in ground cast iron, closing with helical ring, concentric manual clamping, tempered jaws , dimensions (l x w x h) approx.: 260 x 160 x 170 mm, weight approx.: 3 kg
225 € Description: Grinding is accurate and rapid, easy operation with no skill to grind. With diamond grinding wheel, it can be equipped directly with an accurate angle and long service life. The electrically controlled and powerful motor: stable frequency, strong horsepower and long service life. Bearing shaft and locking unit. The machine is set up with the function of adjusting a point (central point) size, which can effectively coordinate with the material of drill hole and the rotation speed. It can control the quality precision and prolong the service life of the drill bit. Standard with CBN grinding wheel for the HSS material. Grinding Range:Φ3-Φ13, Point Angle:100°~135°, Power:AC220V, Motor:120W, Speed:4400rpm, Standard Equipment:Grinding wheel:CBN (for HSS)×1, Eleven collets:Φ3,Φ4,Φ5,Φ6,Φ7,Φ8,Φ9,Φ10,Φ11,Φ12,Φ13 , weight approx.: 10 kg, dimensions (l x w x h) appr ...
746 € Description: The tapping machine is servo driven, with intelligent torque protection, to overcome the traditional limitations of lathe, drilling or manual tapping. Boasting advanced mechanical design, with a variety of processes using in-mold casting, the overall stiffness is strong, durable, non-deformable. The high definition touch screen is simple and intuitive. It can perform vertical and horizontal work of complex and heavy parts, locate quickly and process accurately. Continuous speed change, manual, automatic, with three different working modes. Auto mode can effectively control the touch depth, without the operation button, automatic control by depth controller. Fast repeated positioning, tapping speed, high production efficiency. Voltage: 220V / 50HZ Power: 1200W,0-150RPM. Tap Range: M6-M30 COLLET: M6-8,M10,M12,M14,M16,M18-20,M22,M24,M30 , weight approx.: 20 kg, dimensions ...
50 € Description: Professional analogue outdoor micrometer with a range of 100-125 mm, resolution 0.01 mm. The positive spindle lock holds the anvils in place to ensure accurate measurement registration. High-quality construction combined with easy handling makes this type of analogue micrometer particularly suitable for control operators, workshop technicians, repairers and service personnel. It is supplied in a wooden case for storage and easy transport. , dimensions (l x w x h) approx.: 250 x 200 x 4 mm, weight approx.: 2 kg
453 € Description: It is easy, quick to change the cutter, no need to clamp, easy operate, perfect chamfering, easy adjust,and economic, suitable for batch parts of machanism or mould. In-house developed straight line bevel edge function can make 15 °– 45° adjustment. Need no attire clamping, simplicity of operation, neat bevel edge, easy adjustment greatly enhance operation efficiency. This bevel machine is suitable for batch machine parts production, mold bevel edge. Using high-speed bevel machine is the current trend of the development of mechanical industry. Charmfering range : straight 0-3mm,curved 0-2.5mm. Power: 380V / 750W. Speed:straight 8500rpm,curved 12000rpm. , weight approx.: 62 kg, dimensions (l x w x h) approx.: 520 x 600 x 600 mm
50 € Description: Professional analogue outdoor micrometer with range of application 0-25mm, resolution 0.01 mm. The positive spindle lock holds the anvils in place to ensure accurate measurement registration. High-quality construction combined with easy handling makes this type of analogue micrometer particularly suitable for control operators, workshop technicians, repairers and service personnel. It is supplied in a wooden case for storage and easy transport. , dimensions (l x w x h) approx.: 160 x 60 x 3 mm, weight approx.: 1 kg
600 € Description: Specialize in grinding screw tap. It's precise, easy operation and efficient, also can save large sum of expense for purchasing blade annually. With diamond wheel, can be secondary re-used, with accurate angle and long service life. The electrical controlled high-rate DC motor features stable power, strong horsepower, efficient and long service life. Patent product can grind all the front cutting face, also include the front cutting lip. M20 tap shank is within 14 for grinding. Point Angle:5°~30°, Power:220V, Motor:160W, Speed:4400rpm, Standard Equipment:Grinding wheel:CBN (for HSS), Standard collets:Φ5,Φ7,Φ8,Φ9,Φ13,Φ14 . weight approx.: 16 kg, dimensions (l x w x h) approx.: 360 x 270 x 310 mm
100 € Description: Digital workshop gauges 600X100X0,01 IP66 protection - Hardened stainless steel Shockproof PVC case Reading 0.01 or 0.0005 'mm / inch - preset - ABS - water resistant , dimensions (l x w x h) approx.: 885 x 295 x 50 mm, weight approx.: 5 kg
485 € Description: Grinding is accurate and rapid, easy operation with no skill to grind. With diamond grinding wheel, it can be equipped directly with an accurate angle and long service life. The electrically controlled and powerful DC motor: stable frequency, strong horsepower and long service life. Bearing shaft and locking unit. The machine is set up with the function of adjusting a point (central point) size, which can effectively coordinate with the material of drill hole and the rotation speed. It can control the quality precision and prolong the service life of the drill bit. Standard with CBN grinding wheel for the HSS material. Grinding Range:Φ12-Φ26, Point Angle:95°~135°, Power:220V, Motor:250W, Speed:4400rpm, Standard Equipment:Grinding wheel:CBN (for HSS)×1, Fourteen collets:Φ13,Φ14,Φ15,Φ16,Φ17,Φ18,Φ19,Φ20,Φ21,Φ22,Φ23,Φ24,Φ 25,Φ26 , weight approx.: 32 kg, d ...
100 € Description: 0-300mm 0.01, Digital scrapers with micrometric screw, Chromed stainless steel, On / off - zero - mm / inch - ABS - hold - preset +/-, Tip with carbide insert , dimensions (l x w x h) approx.: 800 x 320 x 165 mm, weight approx.: 5 kg
210 € Description: Grinding is accurate and rapid, easy operation with no skill to grind. With diamond grinding wheel, it can be equipped directly with an accurate angle and long service life. The electrically controlled and powerful DC motor: stable frequency, strong horsepower and long service life. Bearing shaft and locking unit. The machine is set up with the function of adjusting a point (central point) size, which can effectively coordinate with the material of drill hole and the rotation speed. It can control the quality precision and prolong the service life of the drill bit. Standard with CBN grinding wheel for the HSS material, Optional SDC grinding wheel for the carbide material. Grinding Range:Φ3-Φ13, Point Angle:100°~135°, Power:AC220V, Motor:120W, Speed:4400rpm, Dimension:32x18x19 cm, Weight:9kg, Standard Equipment:Grinding wheel:CBN (for HSS)×1, Eleven collets:Φ3,Φ4,Φ5, ...
