Производитель:
(Категория: 105)
: 900 mm: 900 mm: 900x900 mmsaw band length: 9300 x 67 x 1,1 mmtable height: 790 mmband speed: 14 - 60 m/mintotal power requirement: 11 kWweight of the machine ca.: 8,45 tdimensions: 4,485 x 1,68 x 3,15 mThe semi-automatic, hydraulic saws from the X-tech line offer the bestSaw technology and best performance when cutting special steels• The electro-welded machine frame and the steel saw frame meet requirements all cutting needs and eliminate vibration and noise.• The chip conveyor is hydraulically driven and the speed is adjustable• All movements of the machine (saw frame, vice, feed, Saw band guides) are carried out thanks to modern linear guides with high static and dynamic load performance, which also has very low sliding friction to guarantee.• Another characteristic feature is the roles for the Positioning of the material by a hydraulic motor are driven. They m ...
capacity 90 degrees: round: 310 mmcapacity 90 degrees: square: 280 mm: 400x250 saw band length: 4020x34x1,1 mmband speed: 18 - 100 m/mintable height: 890 mmtotal power requirement: 2,2 kWweight of the machine ca.: 0,99 tdimensions of the machine ca.: 1,85 x 2,2 x 2,0 mMiter band saw, fully automatic, GBS 310/400 VA-I CNC• miter left 45° automatic operation• miter left 60° semi-automatic operation (cuts without programming)• Material height sensor (automatic cut start detection)• Frame and gear made from one piece, very quiet cut and very low vibration• Removable chip tray (disinfection)• Shockproof and ergonomic control panel with oil-resistant EPDM cover• Top access to the saw, material and feed unit• Hinged safety cover• Fine feed adjustment• Semi-auto. Cut!• Optimize work processes with CNC control Possibility to enter various parameters such as quantities an ...
Производительность 90 градусов: круглая: 250 ммПроизводительность 90 градусов: квадратная: 240 мм: Длина пильной ленты: 2965 x 27 x 0,9 ммВысота стола: ммСкорость ленты: 37 / 76 м/минОбщая потребляемая мощность: 1,0 кВтВес станка ок.: 0,38 тРазмеры станка ок.: 1,0 x 1,6 x 1,4 мДвойная торцовочная пил
cutting diameter: 360 mmsaw band length: 5050 x 41 x 1,3 mmcutting width: 1,3 mmcutting speed: 15-100 m/mintotal power requirement: 4 kWweight of the machine ca.: 2,8 tdimensions of the machine ca.: 3,0x 2,6 x 2,2 mThe X-SMART 4 is an automatic 2-column band saw suitable for straight cuts in solid materials with a diameter of up to 360 mm.Other features include:4 kW drive motor with 41 mm saw blade widthModern 7 touchscreen CNC controlInclined saw frameSolid 2-column structureLinearly guided material sensorHydraulic cutting pressure regulation500 mm feed unitDouble vise2 vises in front of and 2 vises behind the saw bladeElectrically driven chip conveyorCleaning gunFull enclosureLED work lightMinimum remnant length 100 mmOptionally available:Bundle clamping device, MMS and roller conveyorsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
capacity 90 degrees: round: 125 mmcapacity 90 degrees: square: 125 mm: 127 x 125 mmdimensions of saw-band: 1435 x 12,7 x 0,65 mmband speed: 38 - 80 m/mintotal power requirement: 0,95 kWweight of the machine ca.: 18 kgdimensions: 720 x 380 x 450 mBoth straight and miter cuts can be made at angles between 45 and 90 degrees.With the metal band saw you not only work precisely, but also quickly: the band speed can be variably adjusted between 38 and 80 meters per minute.With a weight of only 25 kilograms, the saw can be used mobile.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
capacity 90 degrees: round: 305 mmcapacity 90 degrees: square: 260 mm: 350x200 saw band length: 3375x27x0,9 mmband speed: 18 - 100 m/mintable height: 880 mmtotal power requirement: 1,5/1,8 kWweight of the machine ca.: 0,84 tdimensions of the machine ca.: 1,85 x 1,9 x 2,0 mDemonstration system for a SPECIAL PRICEFully automatic miter band saw• miter left 45° automatic operation• miter left 60° semi-automatic operation (cuts without programming)• Material height sensor (automatic cut start recognition)• Frame and gear made from one piece, very quiet cut and very low vibration• Removable chip tray (disinfection)• Shockproof and ergonomic control panel with oil-resistant EPDM cover• Top access to the saw, material and feed unit• Hinged safety cover• Fine feed adjustment• Semi-auto. Cut!• Optimize work processes with CNC control Possibility to enter various parameter ...
cutting diameter: 225 mmsaw band length: 2455 mmtable height: 850 mmcutting width: 245 x 150 mmcutting speed: 45/90 m/mindimensions of saw-band: 2480 x 27 x 0,9 mm: 90 mm: 90 mm: 145 mmImpact energy: 145 mmconnected load frequency: 400 Volttotal power requirement: 1,5 kWweight of the machine ca.: 0,2 tdimensions: 1,43 x 0,72 x 1,7 mMiter band saw-Miter cuts up to 60° left-Vice with quick clamping device-Band tension control-Electr. Automatic coolingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 220 mmsaw band length: 2450 x 27 x 0,9 mmtable height: 915 mmband speed: 35 + 70 m/minconnected load frequency: 400 Vcapacity 90 degrees: round: 220 mmcapacity 90 degrees: square: 210 x 210 mmcapacity 90 degrees: flat: 230 x 185 mmtotal power requirement: 1,2 kWweight of the machine ca.: 240 kgdimensions of the machine ca.: 870 x 1550 x 1740 mmThe Zimmer Z241/R is a self-lowering saw for miter cuts from 0 ° -60 ° left. After the cut, the machine stays through oneSafety limit switches stand. The reduction is infinitely variableHydraulic system adjustable. The saw arm can be raised after the cutany position. The saw arm remains at the desired positionstand.The Z241 / R has the following features:Hydraulic cylinder, emulsion pump, eccentric tensioner, base, saw band, 400VConnector -16A-The machine is completely assembled and delivered ready for use.The data for this ad w ...
cutting diameter: 300 mmsaw band length: 3320 x 27 x 0,9 mm mmcutting width: 300 mmControl: NC capacity 90 degrees: flat: 330x 260 mmcapacity 90 degrees: square: 260 x 260 mmcapacity 45 degrees: square: 250 mmcapacity 45 degrees: flat: 270 x 200 mmcapacity 60 degrees: round: 180 mmcapacity 60 degrees: square: 170 mmband speed: 15 - 100 m/mintotal power requirement: 2,2 kWweight of the machine ca.: 1,1 tdimensions of the machine ca.: 3,3 x 2,83 x 2,23 mFurnishing:- fully automatic electro-hydraulic band saw with additional semi-automatic, semi-automatic-dynamic and manual operation- Automatic cycle (cuts from 0° to 60° left) - Semi-automatic, semi-automatic-dynamic and manual cycle (cuts from 45° right to 60° left)- Manual or semi-automatic dynamic cycle to make cuts outside of series production can be carried out directly without programming.- Numerically controlled band saw mac ...
saw blade diameter: 350 mmcapacity 90 degrees: round: 120 mmcapacity 90 degrees: square: 105 mmcapacity 90 degrees: flat: 180 x 70 mmcapacity 45 degrees: round: 120 mmcapacity 45 degrees: square: 100 mmcapacity 45 degrees: square: 135 x 60 mmsaw blade turning speeds: 1700 / 3400 U/mintotal power requirement: 1,5/2,2 kWweight of the machine ca.: 0,285 tdimensions: 1,2 x 1,4 x 1,4 mSemi-automatic circular saw for sawing solid and aluminumHollow iron materials and light metal alloys with electro-weldedCarbide toothed washer.Machine for miter cuts from 45° right to 45° left. Through theAlignment along the vertical is possibleSawing operations with the head inclined between 0° and 45° to the left.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
новый
saw blade diameter: 130 mmcapacity 90 degrees: round: 130 mmcapacity 90 degrees: square: 120 mmcapacity 90 degrees: flat: 180 x 100 mmcapacity 45 degrees: round: 115 mmcapacity 45 degrees: square: 100 mmcapacity 45 degrees: flat: 120 x 100 mmengine: 3,3 / 4,4 KW0: 1400 / 2800 U/minweight of the machine ca.: 1060 kgdimensions: 2,5 x 1,8 x 1,85 mTIGER 402 CNC HR, automatische elektromechanische Vertikalkreissäge für denEinsatz von Hartmetall – Sägeblättern, um Serienschnitte von 45° rechts bis60° links auszuführen.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 220 mmsaw band length: 2455 mmtable height: 850 mmcutting width: 230 mmcutting speed: 35 + 70 m/mindimensions of saw-band: 2455 x 27 x 0,9 mm: 90 mm: 90 mm: 90 x 100 mm: 150 Impact energy: 150 Air consume per blow: 150 x 210 : 220 mmstroke back stop: 210 mmcross-slide: 230 x 185 total power requirement: 1,2 kWweight of the machine ca.: 0,24 tdimensions of the machine ca.: 1,2 x 0,6 x 1,7 mSPECIAL PRICE!-Miter cuts up to 60° left-Cutting speed 35 / 70 m / min.- Vice with quick release device-Carbide saw band guide-Tape tension control-Electr. automatic coolingAuto-Cut-System = 3 step system-Automatic saw frame lowering via the hydraulic cylinder-Infinitely adjustable feed-with limit switch- rapid lowering of the saw frame from the rest position to the workpiece, then switch to normal saw feed-Manual modeShare of freight costs 85 EURThe data for this ad was created with ...
cutting diameter: 220 mmband length: 425 mmcutting lenght max.: 2500 mmtotal power requirement: 0,95 kWweight of the machine ca.: 219 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Wheel diameter: 680 mmsawblade length: 8550 mmSawblade width max.: 1,3 mmCutting height: mmMotor output: 20 kWTable dimensions: 600 x 620 mmFeed speed: m/min.Machine height: mmWeight: 10.000 kgBandsaw horizontal, Precision-Saw for Silicon (Solar industry)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 250 mmcapacity 90 degrees: flat: 280 x 220 mmcapacity 90 degrees: square: 220 x 220 mmvice: 285 mmturning speed range:: 36/72 m/mindimensions of saw-band: 2950x27x0,9 mmtotal power requirement: 1,5 / 1,8 kWweight of the machine ca.: 485 kgdimensions of the machine ca.: 1700 x 1000 x 1800 mmElectro-hydraulic semi-automatic band saw SHARK 282 SXI EVOwith semi-automatic-dynamic, manual function, has a MEP-28 controlfor miter cuts from 45° right to 60° left.Semi-automatic function:At the start of the cycle: - Vice closes and motor starts– Saw head lowers for the cut – Motor switches off – Saw head rises –Vise opens.Semi-automatic dynamic system (manual lowering of the saw band bow up toto the desired position and cycle start via the manual button.)Some features: New centralized control console on an articulated arm to allow the operator can be easily switc ...
capacity 90 degrees: round: 130 mmcapacity 90 degrees: square: 127 x 127 mmdimensions of saw-band: 1140 x 13 x 0,65 mmband speed: max. 144 m/mintotal power requirement: 1,1 kWweight of the machine ca.: 15 kgdimensions: 500 x 300 x 400 mPortable and removable metal band sawSpecial features Powerful with 1100 watts.Including 2 saw bands, work table and integrated LED lighting.With adjustable, variable handle. Light and handy.For universal work in the workshop, on the construction site or for private use.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 280 mmsaw band length: 3320 x 27 x 0,9 mm mmcutting width: 330 mmControl: NC capacity 90 degrees: flat: 330x 260 mmcapacity 90 degrees: square: 260 x 260 mmband speed: 15 - 100 m/mintotal power requirement: 2,2 kWweight of the machine ca.: 1,24 tdimensions of the machine ca.: 3,3 x 2,83 x 2,23 mAttention: special price!•Fully automatic hydraulic band saw•Miter cuts up to 60° left possible•Saw band length: 3650x27x0.9•Single stroke: 600 mm (programmable up to 10m)•Simple touchscreen operation.•Saw arm made of nodular cast iron - robust and stable•Required space 3.4 m²•Footprint 1900mm wide x 1800mm deepThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Диаметр пильного диска: 350 ммПроизводительность 90 градусов: круглая: 115 ммПроизводительность 90 градусов: квадрат: 95 мм: 180 x 95 ммРабочая высота: 925 ммСкорость поворота пильного диска: 15+30+45+90 Об/минобщая потребляемая мощность: 1,8/2,5 кВтВес станка ок.: 0,38 тРазмеры станка ок.: 0,8 x 1,0 x 1,85 мРучная вертикальная циркулярная пила для косых пропилов от 60 влево до 45 вправо.
capacity 90 degrees: round: 255 mmcapacity 90 degrees: square: 240 mm: 300 x 180 saw band length: 2.765 x 27 x 0,9 mm mmtable height: 870 mmband speed: 18 - 110 m/minControl: CNC total power requirement: 1,5/1,8 kWweight of the machine ca.: 0,63 tdimensions of the machine ca.: 1,8 x 1,85 x 1,85 mMiter band saw, fully automatic GBS 255 Super VA-I CNC• miter left 45° automatic operation• miter left 60° semi-automatic operation (cuts without programming)• Material height sensor (automatic cut start detection)• Frame and gearbox made from one piece, very quiet cut and very low vibration• Removable chip tray (disinfection)• Shockproof and ergonomic control panel with oil-resistant EPDM cover• High performance positioning with incremental encoder (CNC) c.• Top access to the saw, material and feed unit• Hinged safety cover• Fine feed adjustment• Semi-auto. Cut!• Optim ...
saw blade diameter: 350 mmcapacity 90 degrees: round: 120 mmcapacity 90 degrees: square: 110 mmcapacity 90 degrees: flat: 200x88 mmcapacity 45 degrees: round: 115 mmcapacity 45 degrees: square: 110 mmcapacity 45 degrees: square: 150x80 mmtotal power requirement: 1,5/1,8 kWweight of the machine ca.: 0,22 tdimensions: 0,7 x 0,9 x 1,9 mATTENTION: SPECIAL PRICE! - Miter left/right 45° - head diagonal cuts up to 45° (shifter) - Pneumatic double quick clamping device Vices close when lowering - Ball bearing table - Machine base - Powerful and powerful - High-quality workmanshipThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
диаметр пильного диска: NA ммДиаметр реза: NA ммХод: ммРабочая зона: 90 ммДиаметр заготовки: 90 x 500 ммПодача: 500 мм Общая потребляемая мощность: кВтвес станка прибл.: tразмеры станка ок.:
saw blade diameter: 370 mmcapacity 90 degrees: round: 120 mmcapacity 90 degrees: square: 100 mm: 180x100 mmWorking height: 925 mmsaw blade turning speeds: 17 - 70 U/mintotal power requirement: 3,0 kWweight of the machine ca.: tdimensions of the machine ca.: 1,9 x 1,45 x 2,1 mSPECIAL PRICE!High-performance vertical circular saw Hydropneumatic fully automatic. (20195)· miter left 60° + right 45°· Hydro-pneumatic control of the saw unit· Electro-pneumatic material feed unit· Smooth-running, powerful worm drive with large Transmission ratio, integrated in a stable cast housing for Achieving optimal cutting results· Vice with double clamping arm for low-burr cuts Lateral quick shift when changing the miter· Precision prism guide of the gear head, laterally adjustable· Particularly stable base frame with built-in automatic cooling system· Large chip drawer· Chip remo ...
Диаметр реза: 250 ммДлина пильной ленты: 0 ммШирина реза: ммДиаметр заготовки: 150 ммОбщая мощность: кВтВес станка ок.: tРазмеры станка ок.: мГоризонтальная ленточная пил
cutting diameter: 250 mmsaw band length: 3150 x 27 x 0,9 mmtable height: 700 mmcutting width: 250 x 320 mmcutting speed: 25 - 90 m/mindimensions of saw-band: 2480 x 27 x 0,9 mm: 120 mm: 120 mm: 190 mmImpact energy: 190 mmconnected load frequency: 400 Volttotal power requirement: 1,5 kWweight of the machine ca.: 0,5 tdimensions: 0,95 x 1,16 x 1,98 mRock-solid band saw for solid material- Double miter cuts up to 60°- AutoCut- Vice with quick clamping device- Belt tension control- Electric automatic cooling system- Material suggestionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
saw blade diameter: 350 mmcapacity 90 degrees: round: 115 mmcapacity 90 degrees: square: 95 mm: 180 x 95 mmWorking height: 925 mmsaw blade turning speeds: 15+30+45+90 U/mintotal power requirement: 1,8/2,5 kWweight of the machine ca.: 0,41 tdimensions of the machine ca.: 0,8 x 1,0 x 1,85 mElectro-pneumatic - semi-automatic vertical circular saw with microProcessor control for miter cuts from 60° left to 45° right. WithLinear guide of the saw head.•new system with head sliding vertically on linear guides Upstream slide rails with recirculating balls.•Double gear set for high transmission performance•4 speeds 15/30/45/90 rpm•Vice opening 190 mm• Stroke of the saw head can be programmed directly from the control panel for adjustment to the cutting material•Pneumatic vertical vice•Saw blade HSS DMO 5 Æ 350x32x2.5 for solid and profile material•Vise with counter-clamping d ...
Key data: 280 mm, 3800 mm
Б/у машина Metora VMB 280 в том числе конвейер для стружки. Машина работает как в ручном, так и в полуавтоматическом режиме. Автоматическая подача не функционирует. Год постройки не известен Машина в подготовке, фотографии будут следовать.
AUDATECH (GEMMA GROUP) двухголовочный электронный отрезной станок модели DH550: - для резки ПВХ, алюминиевых, древесно-алюминиевых профилей - все с электронным управлением: программатор с сенсорным экраном модели TS9003, операционная система Windows, с USB-разъемом для загрузки раскройных листов и с офисным Ethernet-соединением - неподвижная левая головка и подвижная правая головка с автоматическим скольжением по направляющим THK и с бесщеточными двигателями - Диаметр лезвия 550 мм, с микрокапельной режущей см ...
capacity 90 degrees: round: 110 mmcapacity 90 degrees: flat: 255x160 mmcapacity 90 degrees: square: 210x210 mmcapacity 45 degrees: round: 160 mmcapacity 45 degrees: flat: 165x110 mmcutting range 45 degree right side: square: 150x150 mmcutting speed: 11/13/17/22/26/34 m/minstroke speeds: 50/64/82/100/128/164 Hübe/mindimensions of saw-blade: 400x36x2 mmpower requirement: 1,8 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 500 mm
Максимальная длина пилы: 5 000 мм Максимальный диаметр пильного диска: 500 мм Автоматическое позиционирование длины, а также моторизованная регулировка угла наклона внутрь и наружу Движущийся роликовый конвейер Материальное обеспечение Распылительное устройство минимального количества Вес: 1800 кг
Сведения о машине Артикул-No. 1105-04064 Тип станка Ленточная пила - Автоматическая - Горизонтальная Марка BEHRINGER Тип SLB 240 A Год выпуска 2016 Тип управления обычный Место хранения: Гагено, Франция Страна происхождения Германия Сроки доставки немедленно Грузовой базис для свободного груза, со склада HAGUENAU Технические детали Диаметр реза 260 мм длина пильной ленты 4100 x 32 x 1,1 мм ширина реза 260 мм длина подачи 600 мм дальность действия Д-Ш-В 2,5 x 2,2 x 1,6 м Вес машины ок. 2,2 т Дополнительная информация ...
