pressure: 28 t stroke: 180 mm table-size: 300 x 550 mm diameter of piston: 130 mm work speed: min. 2 m/sec work speed: max. 9,8 m/sec return speed: 20 mm/sec Max. pressure: 200 bar weight of the machine ca.: 0,65 t total power requirement: 4 kW dimensions of the machine ca.: 1,15 x 0,75 x 1,1 m • The horizontal bending and straightening press from Profi Press is a universal one Hydraulic press specially designed for performing bending, profiling and Straightening work is designed. The applications of the machine are different and depend on the accessories that are on the work table, the Tool holder and are installed in the holes and pin holes. • The HB-28 model is used for light bending measurements on the work table equipped with an angle scale, and the press can also be equipped with tools are supplied (for example block punching) that are placed on the tool holder Can be assembled ...
pressure: 100 t stroke: 380 mm table surface area: Arbeitsbreite 1100 mm pressure: 258 bar oil volume: 46 dm³ ajustment speed: 7,54 mm/sec work speed: 2,47 mm/sec return speed: 9,06 mm/sec total power requirement: 2,2 kW weight of the machine ca.: 970 kg Inner diameter of the cylinder [mm]: 220 Piston rod diameter [mm]: 90 Diameter piston crown [mm]: 120 - Movable cylinder (left-right) - Integrated pressure gauge - Pressure regulator - Two-speed hydraulic unit - Working table adjustable in height - Joystick to move the piston up / down - Hand pump for precision work The 100 ton hydraulic press is equipped with a movable cylinder (left- right) and a height-adjustable work table. Over and beyond it has a pressure regulation, 2 speeds, a joystick and a hand pump for precision pressing. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 60 t stroke: 380 mm table surface area: Arbeitsbreite 750 mm pressure: 259 bar oil volume: 38 dm³ ajustment speed: 2,87 mm/sec work speed: 9,5 mm/sec return speed: 12 mm/sec total power requirement: 2,2 kW weight of the machine ca.: 540 kg Inner diameter of the cylinder [mm]: 170 Piston rod diameter [mm]: 75 Diameter piston crown [mm]: 100 - Integrated pressure gauge - Pressure regulator - Hydraulic unit with 2 speeds - Working table adjustable in height - Joystick to move the piston up / down The 60 ton workshop press has a fixed cylinder and a height-adjustable work table (motorized). Equipped with Pressure regulation, manometer, 2 speeds and a joystick for the move the piston up and down. With this joystick you can use the piston precisely move, making this hydraulic press perfect for precision jobs suitable. The data for this ad was created with ModulMWS - the software s ...
angular steel - leg outwards: -- mm double T-iron on the x-axis: -- mm U-iron on the x-axis: -- mm : 50 mm : 150 mm throat: 120 mm total power requirement: 1,5 kW weight of the machine ca.: 0,36 t dimensions of the machine ca.: 1,1 x 0,8 x 1,4 m Exhibition machine NEW, year of construction: 2021 The PB 50-3 is a profile bending machine with manual adjustment of thetoprollervia a handwheel. The profile bending machine can be used in vertical and horizontal working position and are equipped with three driven rollers. The change between two or three driven rollers is done simply by the side handle of the machine. - Manual adjustment of the top roller with a handwheel - Vertical and horizontal work possibility - 3 driven rollers - Supplied with a standard roller set - Foot pedal The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 200 t stroke: 400 mm table surface area: Arbeitsbreite 1300 mm pressure: 243 bar oil volume: 64 dm³ ajustment speed: 5,73 mm/sec work speed: 1,84 mm/sec return speed: 7,08 mm/sec total power requirement: 3,0 kW weight of the machine ca.: 1690 kg Inner diameter of the cylinder [mm]: 320 Piston rod diameter [mm]: 140 Diameter piston crown [mm]: 175 - adjustable cylinder (left-right) - Integrated pressure gauge - Pressure regulator - Two-speed hydraulic unit - Working table adjustable in height - Joystick to move the piston up / down - Hand pump for precision work - with digital display This 200 ton hydraulic press is equipped with a movable cylinder (left- right), a height-adjustable work table, a pressure regulator, 2 speeds, a joystick and a hand pump for precision pressing fitted. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 30 t stroke: 350 mm table surface area: Arbeitsbreite 750 x 260 mm pressure: 221 bar oil volume: 37 dm³ work speed: max. 9,8 mm/sec return speed: 14 mm/sec total power requirement: 3 kW weight of the machine ca.: 385 kg Inner diameter of the cylinder [mm]: 130 Piston rod diameter [mm]: 55 Diameter piston head [mm]: 80 - Integrated pressure gauge - Pressure regulator - Hydraulic unit with variable speeds - Working table adjustable in height - Joystick to control piston and speed The workshop press (30T) has a fixed cylinder and a high adjustable work table (motorized). Equipped with pressure regulation, Pressure gauge, variable speed and a joystick to move the piston up and down to move off. With this joystick you can also control the speed adjust, making this motorized hydraulic press perfect for precision work is suitable. The data for this ad was created with ModulMWS - th ...
pressure: 28 t piston stroke: 180 mm diameter of piston: 130 mm table-size: 300 x 550 mm working feed: 2 - 9,8 mm/sek return speed: 20 mm/sec Max. pressure: 200 bar bending capacity - flat iron: 200 x 10 mm weight of the machine ca.: 800 kg dimensions: ca. 1150 x 1103 x 750 mm The horizontal hydraulic press (28 ton) can be used for many different metal working jobs. The press has a piston stroke of 192 mm and can be equipped with all kinds of tooling for specific bending or straightening jobs. We supply a standard toolingset with this press including a stampholder and backgauge. However, we also produce custom-made tooling for your specific request. Thanks to the NC-control you can easily set the cylinder stroke and save up to 100 working cycles. With this horizontal hydraulic press you are able to bend, straighten, notch, cut and form. A universal hydraulic press that serves all your n ...
角铁/腿长度：40 x 40 x 5 mm U-iron，通过 x 轴：80 x 45 x 5 mm 卷筒直径 - 孔：40 mm 滚筒直径 - 工具：150 mm 速度：10 rpm 电压：400 V / 50 Hz 总功率要求：1.5 kW 机器重量约：0.3 t 空间要求约：0.8 x 0.92 x 1.4 m 机器具有用于型材的标准滚轮组：扁平（直立）60 x 10， 手动输送上辊， 交货距离72毫米，用脚踏板操作 ，水平或垂直工作 位置，可选配其他 滚轮组，数据 fü，此广告是用ModulMWS创建的 - LogoTech oHG的机器管理。
