Fabricante:
(Categoria: 102)
This TORNOS DECO 2000-10 was manufactured in 1999. It features a loading magazine with drum, integrated hydraulic unit, and supports both front and rear with a center height of 1100 mm. It includes a movable headstock, directional spindle stop, and cross slide with tool holders. Ideal for precision turning, it operates on AC drive motors with an absolute measuring system. Contact us for more information about this machine.
This 8s Muratec MW 40 was manufactured in 2019. It features a twin-spindle configuration with automatic loading and unloading capabilities. The machine includes 2 C-axes and 2 Y-axes, providing versatile machining options. With a total of 7 turning holders and 6 boring holders, it is designed for efficient part handling. If you are looking to get high-quality turning and milling capabilities, consider the Muratec MW 40 turn-mill centre we have for sale. Contact us for further details.
Controls: Mitsubishi, weight: 2.2t. Equipment: main spindle with guide bush system, counter spindle, two C axes, several driven tools, front machining and rear side machining, tool block for cross machining, automatic parts catcher, bar feeder connection, tool cabinet with original setting tools, spindle monitoring EWL 4444, high pressure coolant supply, extraction connection. An on site inspection is possible.
Controls: Mitsubishi, weight: 2.53t. Equipment: counter spindle, tool turret with driven tool stations, linear slide with driven tools, bar feeder interface, tool set and setting tools, spindle monitoring EWL 4444. An on site inspection is possible.
Max. turning diameter: 12mm, max. turning length: 200mm, rated current: 40A, mains voltage: 200V, connected load: 8kVA, weight: 2.1t, with sub spindle, driven tools. An on site inspection is possible.
This Weiler E30 was manufactured in 1990. A robust horizontal turning machine featuring a spindle bore of 42mm and a swing diameter over bed of 330mm. It supports a wide range of thread cutting, from metric to DP thread, and includes a Multifix holder B. Ideal for detailed and versatile turning operations. Contact us for more information about this machine.
This 4-axis DOOSAN Lynx 220 LMS was manufactured in 2013. It features a Fanuc 31 i control unit and comes equipped with a short bar loader/bar feeder. If you are looking to get high-quality turning capabilities, consider the DOOSAN Lynx 220 LMS machine we have for sale. Contact us for further details.
Geral Fabricante: Citizen Tipo: K 12 VIIP Ano de fabricação: 2005 Controlo: Fanuc 30i-A Número de eixos: 7 Diâmetro exterior: 12 mm Comprimento de curva: 200 mm Diâmetro da rosca: 8 m Passagem do fuso: 20 mm Fuso Velocidade: 200 – 10.000 t/min Diâmetro de rosca: 5 m Sub-fuso Velocidade: 0 – 10.000 t/min Comprimento da peça para contra-usinagem: 80 mm Suporte de Ferramenta Número de ferramentas acionadas: 4 Velocidade das ferramentas acionadas: 6.000 t/min Impulso Ligação 50 Hz 3x: 400 Volts Motor do fuso: 3,7 kW Dimensões e peso Dimensões: 2.020 mm x 1.070 mm x 1.680 mm Peso: aprox. 2.250 kg Condição Condição: Usada Funcional: Testado e totalmente funcional Outros equipamentos e acessórios incluíam: Alimentador de Barra Iemca Genius 118 32U
Horizontal turning machine manufactured in 2006. This DOOSAN Puma 240 MB features driven tools and is equipped with a Fanuc 0iTC control unit. If you are looking to get high-quality turning capabilities, consider the DOOSAN Puma 240 MB machine we have for sale. Contact us for further details.
Horizontal turning machine manufactured in 1999. This DAEWOO EcoTurn 200 features a reliable Fanuc 18 T control system, ensuring efficient operation. If you are looking to get high-quality turning capabilities, consider the DAEWOO EcoTurn 200 machine we have for sale. Contact us for further details.
Horizontal turning machine manufactured in 1991. This Gildemeister CTX 400 features a reliable EPL 2 control system, ensuring efficient operation. If you are looking to get high-quality turning capabilities, consider the Gildemeister CTX 400 machine we have for sale. Contact us for further details.
Horizontal turning machine manufactured in 1993. This Gildemeister CTX 400 is in good condition and fully functional, featuring EPL 2 control. It comes with an extraction hose/pipe connected to the side enclosure. If you are looking to get high-quality turning capabilities, consider the Gildemeister CTX 400 machine we have for sale. Contact us for further details.
Horizontal turning machine manufactured in 2000. This DAEWOO Puma 350 features a reliable Fanuc 18T control system, ensuring efficient operation. If you are looking to get high-quality turning capabilities, consider the DAEWOO Puma 350 machine we have for sale. Contact us for further details.
Two Schütte six-spindle turning machines including one Iemca bar feeder are available. 1) Schütte SF 42, year of manufacture: 1977, number of spindles: 6, max. bar capacity: 42mm, max. longitudinal slide stroke: 125mm, speed: 2240rpm, machine dimensions X/Y/Z: approx. 6500mm/1400mm/2200mm, weight: approx. 10000kg. Including pick-off spindle, cams, collets, chip conveyor, oil mist extraction system and Iemca PRA40/33/P bar feeder. 2) Schütte SF 51 DNT, year of manufacture: 1987, max. bar capacity: 51mm, number of spindles: 6, max. turning length: 102mm, max. drilling depth: 102mm, spindle circle diameter: 340mm. Including pick-off spindle, CNC cross slide in position 4, cams, collets, auxiliary coolant pump and chip conveyor. Documentation available. An on-site inspection is possible.
This 6-axis TRAUB TNK 36 was manufactured in 2003. It features a maximum spindle speed of 6,300 rpm and a main spindle bore of 36 mm. The machine is equipped with advanced capabilities such as tool monitoring, rigid tapping, and a high-pressure coolant system. If you are looking to get high-quality turning capabilities, consider the TRAUB TNK 36 horizontal turning machine we have for sale. Contact us for further details.
Voltage: 380V, frequency: 50Hz, spindle power: 10hp continuous, 15hp for 30 minutes, amperage of largest motor: 40/60A, KA. DC gradation: 10, control: Mazak MAZATROL T-1, weight: 4.5t, with programming manual. An inspection on site is possible.
Heavy Duty Lathe Seiger SLZ 1200 x 3000with Siemens Sinumerik 810D Cycle Control (Teach-In)The heavy duty lathe Seiger SLZ 1200 x 3000 is equipped with a Siemens Sinumerik 810D cycle control (Teach-In). The machine was most recently used as a faceplate and frontal lathe and therefore operated without a tailstock and without steady rests. However, the machine can still be structurally equipped with appropriate steady rests or a tailstock and used for classic center work.Configuration with AC main drive, large faceplate, hydraulic unit, separate control cabinet, and 2 chip conveyors.Working AreaDistance between centers: 3,000 mmSwing diameter over bed: 1,200 mmSwing diameter over cross slide: 850 mmCross slide travel: 620 mmBed width: 750 mmSpindleSpindle nose: DIN 55027 size 11Spindle diameter front bearing: 190 mmSpindle bore: 104 mmSpeed range: 5 – 900 min⁻¹Max. torque: 6,000 NmMai ...
Gildemeister GMX 250S Centro Linear de Torneamento/Fresagem CNC Cobertura Maho DMG Hersteller [fabricante]: Gildemeister Deckel Maho DMG Tipo [ tipo]: GMX 250S Linear Unidade de controlo [de controlo]: Heidenhain Plus IT 3D CNC Pliot 4290 plus it Baujahr[ano de construção]: 12/2008 A classe principal de torneamento e fresagem! Dados importantes da GMX 250S Linear: • Centro de fresador de torneios de 7 eixos • Fuso principal e contra-fuso • Eixo B até 240 • Fresagem do eixo até 12.000 rpm • Revista de ferramentas até 80 lugares • Controlo Siemens 840D ou Heidenhain • Atuadores lineares para alta dinâmica e precisão • Diâmetro de maquinação aprox. 520–640 mm • Comprimento de torneio até aproximadamente 1.185 mm Equipamento típico: • Eixo Y • Ferramentas elétricas • Alimentador de barras • Arrefecimento de alta press ...
Centre height: 350mm, turning diameter: 700mm, spindle bore: 108mm, spindle speed: 13-1,000rpm. An on-site inspection is possible.
Fresh oil lubrication capacity: approx. 3l, voltage: 400V, frequency: 50Hz, fuse protection (slow-blow) according to VDE 0100: 80A, permissible voltage fluctuation at 400V: ±10%, connected load: 44kVA, length: 3210mm, width: 1750mm, height: 1750mm, weight: approx. 4.6t, with chip conveyor. An on-site inspection is possible.
This 4-axis Okuma LB 3000 EXII was manufactured in 2022. It features a spindle speed of 5,000 rpm and a bar capacity of 52 mm. The machine includes a 12-position motorized turret and a Y-axis travel of 120 mm. If you are looking to get high-quality turning capabilities, consider the Okuma LB 3000 EXII horizontal turning machine we have for sale. Contact us for further details.
swing diameter: 2200 mmcentre distance: 9500 mmturning diameter over bed: . mmturning diameter over slide rest: . mmturning length: . mmworkpiece weight: 70 tturning speeds: . U/min4-jaw-chuck diameter: 2100 mmcontrol: Siemens type: Sinumerik 850 T mmtransmission ratio: . total power requirement: . kWweight of the machine ca.: . tdimensions of the machine ca.: mSingle CarriageTailstockHydrostatic BedChip ConveyorSerial Number: 27486The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on o ...
This 7-axis TRAUB TNC 65 DGY was manufactured in 2009. It features a powerful tool drive turret with a speed of 4000 rpm and a high-pressure coolant system with programmable pressure stages. The machine is designed for machining metals and plastics, equipped with a C-axis for numerically controlled turning and positioning. If you are looking to get high-quality turning capabilities, consider the TRAUB TNC 65 DGY horizontal turning machine we have for sale. Contact us for further details.
Multi-spindle turning machine manufactured in 1992. This Mazak Quick Turn 18 NSP features a maximum turning diameter of 260 mm and a turning length of 500 mm. It includes a tool turret with 8-fold / 16 positions and a spindle speed range of 36 - 3,600 rpm. If you are looking to get high-quality turning capabilities, consider the Mazak Quick Turn 18 NSP machine we have for sale. Contact us for further details regarding this machine.
Centro CNC de torneamento e fresagem Okuma Multus B300 Controlo: OSP-P200L Ano de Fabricação: 2007 Máquina interna nº 60 Viagens: Eixo X 690 mm Eixo Y 230 (-115 a +115) mm Eixo Z 1.545 mm Eixo B 0,001 ° Eixo C 360° Eixo W: 1.550 mm Diâmetro máximo de rotação: 710 mm Montada: HSK 63 Total de estações de ferramentas: 40 localizações Velocidade do fuso: 38 – 3.800 rpm Equipamento / Acessórios - Transportadores de cavacos - mandilha de 3 mandíbulas SMW KNCS-N-260-72 - Sistema de filtro de fita de papel compacto 500l - IGF One Touch
À venda Doosan Multi Tarefa CNC tipo centro de torneamento MX2100LST com controlador Fanuc 31i-A. Este Doosan MX2100LST é um centro de torneamento/fresagem CNC multifuncional de alta qualidade e 9 eixos. A máquina combina as funções de um centro de torneado CNC e de maquinação numa única fixação (torneia-fresagem). Capacidade e Área de Trabalho Diâmetro máximo de rotação: 540 mm Comprimento máximo de giro: 1.540 mm Diâmetro máximo sobre a bancada: 750 mm Diâmetro máximo sobre o eixo de empuxo: 650 mm Fusos (fuso principal e contra-fuso) Ambos os fusos oferecem desempenho idêntico e, assim, permitem a transferência e maquinação simétricas das peças: Tamanho da placa de elevação: 8 polegadas (opcional 10 polegadas) Velocidade máxima: 5.000 rpm Potência do motor do fuso: 22 kW Diâmetro máximo do eixo / Diâmetro máximo da haste: 65 mm. Resol ...
Voltage: 380V, current consumption: 125/118A, control system: Philips B2T 6, equipment: hydraulically actuated turret vorhanden, enclosed working area with slant bed geometry, hydraulic clamping system, piping, condition: fully functional, very good mechanical condition, visually well maintained, partially overhauled, tool turret: angular position encoder completely renewed, turret indexes absolutely faultlessly and precisely according to the data sheet, CNC control system: power supply professionally overhauled, main spindle drive: power section/drive completely overhauled, with power chuck and base jaws. An on-site inspection is possible.
Interface: RS232C, connected load: 21kVA, control system: Okuma OSP 5000 L-G, length: 2900mm, width: 1800mm, height: 1720mm, weight: 4.5t, ball screw of the X-axis has 0.2mm backlash, regularly maintained, with chip conveyor. An on-site inspection is possible.
Tool monitoring, thread cutting without compensating chuck, main spindle: spindle bore: 36mm, max. speed: 6300rpm, drive power: AC 6.7/10.7kW, C-axis, Hainbuch change parts, installation aid base body, Hainbuch manual changing device, counter spindle: counter spindle as motor spindle, C-axis, device for counter clamping pressure, workpiece ejector device, Hainbuch Axfix chuck, upper tool carrier, driven tools, electronic gearbox, X3 cross axis for front attachment, 5-position front attachment and cut-off side machining station with driven tools, machine and control cabinet RAL 7037 (dust grey), covers RAL 7035 (light grey), workpiece discharge device: workpiece gripper, gripper jaws D5-8, D8-20, D20-36, coolant lubrication system: tank 230l/7bar/50l/min, internal coolant supply 30bar, high pressure 120bar at the front and rear machining station, Knoll VRF 150/750 vacuum rotary filter (su ...
-Mestre da Guilda -N.E.F. CT40 -N.º: 09213 -Ano: provavelmente por volta de 1985 -Horário de funcionamento: aproximadamente 27.500 -incluindo transportador de chips -incluindo armário de oficina com conteúdos para Gildemeister NEF CT40 --> Construção metálica, cor: verde com tiras de pega pretas, 7 gavetas, conteúdo: aços de torno, placas de carboneto, gabaritos, etc. Envio disponível mediante pedido. Venda apenas a comerciantes. Preço de compra declarado = líquido mais 19% IVA = €4.998,00 bruto
