Fabricante:
(Categoria: 102)
CNC TORNEIO VERTICAL YOUJI MODELO YV-800E + C, EQUIPADO COM FANUC 18T CONTROLADOR E FERRAMENTAS ROTATIVAS. Especificação técnica: - Diâmetro máximo de viragem 1000 mm - Diâmetro máximo de rotação 900 mm - Altura máxima de viragem 800 mm Movimentos de trabalho: - x movimento transversal - 50 / + 810 mm - Movimento vertical Z 880 mm - x movimento rápido 20 m / min - Z movimento rápido 20 m / min - Taxa de alimentação 0,001-500 mm / rotações - taxa de avanço em operação manual (JOG) 0 - 1260 mm / min - motor de alimentação x FANUC AC 3,7 kW - motor de alimentação z FANUC AC 3,7 kW Eixo: - motor de eixo FANUC AC Alpha P40, cont. / 30 min 18,5 / 22 Kw - fabricante de gamas de caixas de velocidades de motor de fuso 2 ZF, Alemanha - Voltas 10 - 800 km/min - cabeça de fuso A2-11 - Rolamento de eixo de diâmetro 330 mm Ferramentas: - torre VDI de 12 e ...
A Mori Seiki CNC lathe is available. Swing diameter over bed/slide: 450mm/300mm, max. turning diameter: 160mm, turning length: 525mm, travel X/Z: 135mm/560mm, bar capacity: 42mm, spindle bore: 52mm, spindle nose: JIS A2-5, spindle speed: 5000rpm, power: 7.5kW, torque: 172Nm, tool stations: 12, tailstock taper: MK4, quill diameter: 75mm, quill stroke: 80mm, rapid traverse: 12m/min. Machine dimensions X/Y/Z: approx. 2500mm/1500mm/1700mm, weight: approx. 3250kg, control: Fanuc Series 15-T. Documentation available. An on-site inspection is possible.
A Traub CNC automatic lathe including a bar feeder and chip conveyor is offered. Max. bar diameter: 42mm, min./max. bar stock diameter: 12mm-42mm, turning diameter: 42mm, turning length: approx. 250mm, max. speed: 4000rpm, main spindle stroke: 100mm, main spindle feed force: 1600N, number of cutoff slides: 4, X-axis slide stroke: 60mm, cutoff slide working stroke: 33mm, cutoff slide feed force: 4kN, cutoff slide rapid traverse: 15m/min, cutoff slide feed rate: 2.5m/min, slide dimensions X/Y: 112mm/320mm, guide width: 30mm, turret slide X/Z-axis: approx. 80mm/245mm, rapid traverse X/Z: 15m/min/15m/min, feed force X/Z: approx. 3200N/9000N, tool stations: 8, tool holder diameter: 25.4mm, max. turret indexing time: approx. 0.9s, remnant part dimensions X/Y: 42mm/240mm, max. workpiece dimensions for back-side machining X/Y: 42mm/100mm, longitudinal stroke for back-side machining: approx. 115m ...
This 4-axis Hyundai Wia L2100SY turn-mill centre was manufactured in 2012. It features a maximum turning diameter of 335 mm and a turning length of 455 mm. The machine is equipped with a 12-station turret and a spindle speed of up to 4,500 rpm. If you are looking to get high-quality turning capabilities, consider the Hyundai Wia L2100SY machine we have for sale. Contact us for further details.
DMG MORI CTX beta 1250 TC 4AYear of manuf. : 2014 Control : Siemens 840 Dsl - Operate Turning diam. : 340 mmTurning length : 1185 mm____________Description:In General:Year of manufacture:2014Control system:Siemens 840 Dsl - OperateSwivel diameter:540 mmTurning length:1,185 mmBar capacity:67 mmMain spindle:Technology:Direct drive spindleSpeed:5,000 rpmPower:32 kWTorque:360 NmBar capacity:67 mmC-axis:0.001°Chuck:Hainbuch Spanntop Axfix 65Hydraulic clamping:Differential pressure clampingClamping cylinder:Hollow clamping cylinderCoolant supply:External (chuck flushing)Sub spindde:Technology:Direct drive spindleSpeed:5,000 rpmPower:32 kWTorque:360 NmC-axis:0.001°Chuck:Hainbuch Spanntop AxfixHydraulic clamping:Differential pressure clampingCoolant supply:External and internalTailstock function:Mechatronic control of the sub spindleTool carrier I (X/Y/Z/B):Technology:Milling spindle on ...
Offered is a CNC lathe Traub. Number of spindles: 2, spindle height above floor: 1130mm, max. turning diameter: 36mm, max. bar diameter: 36mm, max. turning length: 100mm, max. main spindle speed: 6300rpm, max. counter spindle speed: 6300rpm, main spindle power: approx. 10.7kW, counter spindle power: approx. 10.7kW, drive power range: main spindle travel X/Z: 370mm/250mm, counter spindle travel X/Z: 370mm/250mm, tool turret: 12, turret travel X/Z: 50mm/100mm, Y-axis turret: +/-20mm, max. speed of driven tools: 6000rpm, front tool positions: 5, rear tool positions: 5, control: Traub TX 8i. Weight: approx. 4000kg, machine dimensions: X/Y/Z: approx. 3400mm/1300mm/1700mm. Documentation available. Inspection possible by arrangement.
- Diâmetro máximo de rotação: 160 mm - Diâmetro máximo da haste: 65 mm - 2x ferrolhos de sulco, caminho plano 70 mm - 2x varas transversais, caminho plano 70 mm - Torre de 8 velocidades, não motorizada - Eixo principal de velocidade máxima: 7.500 1/min - Transportadores de cavacos Acessórios - Alimentador de barras IEMCA TAL 65/32 Dimensões LxWxH: - Máquina com transportador de cavacos 4200 x 1385 x 1800 mm - Alimentador de barras 4000 x 800 x 1400 mm Peso total: 6.500 kg
