serras madeira usadas para venda (1,103)

Descrição - Funcionamento particularmente suave e preciso graças a uma carcaça de máquina sem torção e uma estrutura sólida em chapa de aço - Mesa de serra de ferro fundido com superfície polida e lixada com precisão - Configuração laser conveniente para cortar marcação de linhas - Fixação rápida da lâmina da serra através de alavanca excêntrica na parte traseira da máquina - Duas velocidades de série - Guias precisas para lâminas de serra de 3 roles, superior e inferior como padrão - Ajuste rápido da altura de corte através de botão rotativo e rack com escala milimétrica - Guia de corte em alumínio de corrida lisa com abraçadeira rápida excêntrica e lupa - Travagem angular padrão, ajustável em 60 graus em ambos os lados - Interruptor de segurança para desligamento automático quando a porta é aberta Dados técnicos Dimensões e pesos C ...

Design de precisão para profissionais com alto desempenho de corte e muitas opções de equipamento Descrição Design de alta resistência com alto peso morto para máxima suavidade Funcionamento particularmente suave e preciso graças à carcaça da máquina resistente à torção Volantes de inércia fundidos com revestimento de borracha e escova de limpeza Guia padrão de serra de serra de precisão de 3 rolos no topo e na parte inferior Grande mesa de serra de ferro fundido, giratório de 0 a +15 com superfície polida e polida Grande vedação de ferro fundido com guia de vara redonda, fácil de mover Indicador de Tensão da Lâmina da Serra Ajuste preciso da altura de corte via rack com escala milimétrica Motor de travagem automática Disponível mediante pedido Versão com altura de corte até 1650 mm Outros designs especiais A mesa, o motor e o i ...

Serra Raimann com múltiplos rasgos Tipo: KM 310 Ano de Fabricação: 1997 EC Largura máxima de corte 310 mm Altura de corte 10 – 90 mm ajustável pelo volante manual altura máxima de corte sem peneira de pressão 90 mm, com peneira de pressão 75 mm Largura da passagem à direita da lâmina da serra 150 mm largura máxima da passagem 650 mm Motor de serra 30 kW Controlo por frequência de alimentação 0,75 kW Largura da corrente 340 Diâmetro do eixo da serra 65 mm Diâmetro máximo da lâmina da serra: 300 mm Diâmetro da lâmina da serra sem soquete 80 mm, com soquete de 80 mm Velocidade do eixo da serra: 4200 rpm. Velocidade de avanço infinitamente variável de 5 a 35 m/min. Diâmetro da ligação de extração 200 mm Velocidade do ar: 30 m/s Volume de ar 3400 m³/h Cadeia de transporte com picos Máquina em bom estado, pronta a usar incluindo transporta ...

Key data: 5600 mm, 40 mm

Serra de painel Holzma com carga de mesa de elevação Tipo: HPL 11/X/56/27/L Ano de Fabricação: 2001 Formato da placa máx. 5600 x 2700 mm, mínimo 1525 x 1220 mm Espessura da placa máx. 40 mm, mínimo 3,2 mm Altura máxima da embalagem: 110 mm Tamanho pré-fabricado mínimo 100 x 100 mm Podem ser cortadas tiras estreitas até 30 mm de largura. Com carregamento por mesa de elevação Altura de empilhamento na entrada e saída máximo 480 mm Deslocamento de empilhamento máx. 20 mm Motor principal da serra 18 kW Motor de serra de pontuação 2,2 kW Abertura do coletor 130 mm Diâmetro da lâmina da serra: 450 mm Protuberância da lâmina da serra 125 mm Comprimento de corte 5600 mm Largura de corte (curso do ferrolho do programa) 5600 mm Mesa de elevação 5600 x 2700 mm, carga útil 10 para. com transportadora de rolos acionados e conversor de frequência Altu ...

: 15282 90 band length: 4600 - max. 4750 mm: Fabr. Ideal weight: ca. 890 kgdimensions of the machine ca.: 130 x 850 x 2300 mmPlease note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Serra circular Serra de bancada Serra circular Altura de corte 280 mm Diâmetro da lâmina da serra 750 mm Potência do motor 7 kW Transmissão por correia em V, 3 correias em V Tamanho da mesa: 1250 mm x 940 mm Registro deslizante na mesa Comprimento do batente: 1200 mm x altura: 125 mm Largura de corte à direita da lâmina da serra: máximo 550 mm Diâmetro da ligação de extração 120 mm Peso com palete 340 kg Dimensões 1600 mm x 1100 mm x H 1350 mm Dimensões de carga 1400 mm x 1100 mm x H 1600 mm

Key data: 500 mm, 180 mm

Serra de corte transversal sob a mesa Largura de corte aproximadamente 500 mm Altura de corte aproximadamente 120 mm Movimento transversal de baixo, contínuo da frente para trás A capacitação é acionada por um interruptor de pé Motor aproximadamente 3 kW Lâmina de serra com diâmetro de 500 mm, lâmina de serra com ponta HM Ligação de sucção no corpo da serra na parte inferior traseira de diâmetro. 100 mm em cada lado do transportador de rolos com 3000 mm de comprimento, comprimento de rolos 500 mm, Diâmetro do rolo 80 mm, espaçamento do rolo do centro ao centro 205 mm Um transportador de rolos com 2 stops de comprimento deslizante Dimensões externas: L 6800 mm x L 950 mm x H 1300 mm

Three-function combined table circular saw, slotted hole drilling and milling machine by Kirchner, Leipzig. Without milling arbor. Technical data: Motor: 3 kW Condition: Gebraucht Location: Tauberbischofsheim, Germany

Portable firewood saw for cutting up strips, branches and other waste wood. Technical data: Length: 950 mm Width: 600 mm Cutting height: approx. 60 mm Motor: 1.5 kW Power supply: 220 V Condition: Gebraucht Location: Tauberbischofsheim, Germany

Portable firewood saw for cutting up strips, branches and other waste wood. Technical data: Length: 950 mm Width: 600 mm Cutting height: approx. 60 mm Motor: 2.2 kW Connection: 16 A / 400 V Condition: Gebraucht Location: Tauberbischofsheim, Germany

The EMMEGI wood and aluminium cross-cut saw is designed for cutting to length and mitre cuts: swivelling Technical data: Motor: 0.55 kW / 220 V Cutting height: approx. 50 mm Cutting depth: approx. 80 mm Condition: Gebraucht Location: Tauberbischofsheim, Germany

Rema DMGB-35 double cross-cut saw, including an outfeed conveyor belt, for cross-cutting timber on both sides. This machine was specifically used for cutting doors to size. In its current condition, the cutting length is limited to 1,000 mm, but this can be extended. Technical data: Belt length: approx. 1,700 mm + 2,700 mm Cutting width: max. 2,500 mm Cutting height: max. approx. 80 mm Condition: Gebraucht Location: Unbekannt, Belgium

Pfeiffer Piccolo pendulum saw with a sturdy roller feed system for cutting boards and beams. The machine is fitted with a pneumatic saw feed mechanism with a safe two-hand operation system. Video available on request. Technical data: Cutting height: max. approx. 120 mm Cutting width: max. approx. 600 mm Roller table: 250+360 cm Feed: Pneumatic Condition: Gebraucht Location: Tauberbischofsheim, Germany

Striffler Type 2750-E double mitre circular saw for precise mitre and cross cuts in timber profiles, mouldings and frames. The machine is ideally suited to mass production in the window, door and furniture manufacturing sectors, thanks to its two pneumatically swivelling saw units and electronic positioning. Technical data: Cutting length: approx. 2,200 mm Mitre angle: 45° – 90° Workpiece: max. 50 × 70 mm Further details: See PDF Condition: Gebraucht Location: Tauberbischofsheim, Germany

Graule AGT combined pull-through and table circular saw. The pull-through saw can be tilted and swivelled. The machine can also be used solely as a pull-through saw by removing the table. Cutting height 85/40 mm Technical data: Cutting length: max. 380 mm Condition: Gebraucht Location: Tauberbischofsheim, Germany

Dimter OptiCut 700 automatic optimising cross-cut saw (sliding saw) for cutting very wide timber to size according to defects (marked with fluorescent chalk) and length. Technical data: Cutting height: max. 120 mm Feed length: max. 5,500 mm Cutting width: max. 700 mm Saw blade diameter: max. 700 mm Condition: Gebraucht Location: Tauberbischofsheim, Germany

Bäuerle KFL Milling and Drilling Machine The robust Bäuerle KFL combined woodworking machine combines a panel saw, a long-hole drilling machine and a table milling machine with feed in a single unit, and comes with a comprehensive range of accessories. Technical data: Motors: 2 Length: approx. 320 cm Width: approx. 140 cm Height: approx. 160 cm Table: swivelling Technical details: on request Condition: Gebraucht Location: Tauberbischofsheim, Germany

Sturdy Pehaka band saw for sawing timber and other materials. Technical data: Roller diameter: 800 mm Motor: 3 kW Clearance height: max. approx. 350 mm Condition: Gebraucht Location: Tauberbischofsheim, Germany

The Graule ZS 85 N mitre saw is designed for cutting to length and making mitre cuts: it can be swivelled and tilted. Cutting height 85 mm Cutting length 380 mm Technical data: Motor: 1.5 kW Connection: 380 V Condition: Gebraucht Location: Tauberbischofsheim, Germany

Large A. Recker ATS-type mobile timber circular saw for various sawing tasks in workshops or on construction sites. Condition: Gebraucht Location: Tauberbischofsheim, Germany

The Ulmia 1622 table saw is designed for precise rip and cross cuts in solid timber and wood-based materials. Its robust construction ensures reliable performance in craft workshops and general workshops. Ideal for joinery and general timber and furniture construction. Technical data: Table size: 560 x 710 mm Saw blade diameter: max. approx. 300 mm Motor: 1.5 kW Condition: Gebraucht Location: Tauberbischofsheim, Germany

SCM Type M3 multi-blade and trimming circular saw for efficient rip cutting, trimming and cutting to size of solid timber, boards and planks. This robust machine is suitable for precise batch cutting with multiple saw blades and a continuously adjustable chain feed. Technical data: Chain width: 300 mm Cutting height: ~100 mm Engine: 35 PS Condition: Gebraucht Location: Tauberbischofsheim, Germany

APK special-purpose automatic sawing and milling machine for cutting timber blocks to length and subsequently milling them. Custom-built for the production of cutlery tray inserts (see pictures) or similar workpieces. Workflow: 1. Feeding the material from the magazine 2. Cutting to length (sawing) to the desired length 3. Milling the sawn workpieces 4. Ejection of the finished part. Technical data: Workpiece length: 55–170 mm Workpiece height: max. 27.5 mm Workpiece width: max. 28 mm Milling units: 2 Cross-cut saw: 1 Condition: Gebraucht Location: Tauberbischofsheim, Germany

Flotjet 2000 table-type circular saw, model 480003, for precise rip, cross and mitre cuts in small pieces of solid timber, sheet materials and plastic. The robust construction, the swivelling table and the integrated sliding table enable flexible and precise workpiece guidance and high cutting accuracy. Suitable for furniture making, interior fit-out and craft workshops. Technical data: Pitch: ~ 650 mm Cutting width: ~ 170 mm Cutting height: ~ 40 mm Condition: Gebraucht Location: Tauberbischofsheim, Germany

Graule Type ZS 135 N crosscut and mitre circular saw for precise cross-cutting and mitre cutting of solid timber, mouldings and profiles with a high cutting height. It can be swivelled and tilted. Its robust construction and precise angle adjustment enable clean and repeatable cuts in craft work and workshop production. Ideal for all woodworking businesses. Includes base frame. Cutting height ~ 135 mm Cutting length ~ 460 mm Technical data: Motor: 2 kW Connection: 380 V Condition: Gebraucht Location: Tauberbischofsheim, Germany

Second-hand Martin T72 A panel saw for professional cutting work in woodworking. The machine is suitable for typical panel cutting and sawing tasks when working with wood-based materials. Technical data: Cutting height: ~ 145 mm Cutting width: ~ 1,300 mm Cutting length: 3,300 mm Tilt angle: 45° Stop: Digital Adjustment: Electronic Rip fence: Manual Condition: Gebraucht Location: Tauberbischofsheim, Germany

Striebig Automat TRK 6220 AV vertical (floor-standing) panel cutting saw with Schneeberger Positron positioning control for the precise horizontal and vertical cutting of wood-based, plastic and composite panels. Can be freestanding or wall-mounted. The machine operates with manual feed; the automatic feed function is currently not operational. Technical data: Cutting length: 5,300 mm Cutting width: 2,200 mm Material thickness: max. 80 mm Motor: 5.5 kW Condition: Gebraucht Location: Tauberbischofsheim, Germany

Panel saw manufactured in 2025. This Wehrmann WT-50/900 is designed for classic cutting of wood and wood-based materials, featuring a maximum panel width of 450 mm and thickness ranging from 8 mm to 40 mm. It includes a user-friendly design with servo-controlled drives and a robust steel frame. If you are looking to get high-quality cutting capabilities, consider the Wehrmann WT-50/900 panel saw we have for sale. Contact us for further details.

Serra Pêndulo Manual IRION Ajuste 45° + / - Espessura de corte de 160 mm Ligação por sucção Motor 7,5 KW Óptimas condições! Disponível imediatamente a partir do local

Key data: 5300 mm, 2200 mm

Serra de painel vertical Dimensões de corte máx: 5300 x 2200 x 80 mm Parede traseira evasiva motorizada Financiamento Ataque em faixa