Tipo de máquina
(Quantidade: > 9)
Tipo de máquina
(Quantidade: > 2)
Fabricante:
(Categoria: 2100)
Consisting of: DJR186 Reciprocating Saw, DTM52 Multitool, DJV182 Jigsaw, DGA504 Angle Grinder, DC18RD Dual Battery Charger, Tool Bag Auction-ID: A1-46651-1017
Consisting of: DTM51 Multitool, DGA504 Angle grinder, DDF484 Screwdriver, DTD152 Impact driver Auction-ID: A1-46651-1018
Consisting of: 1x DTD153 impact screwdriver, 1x DTW190 impact wrench (2020), DJV182 jigsaw, DMR110 radio (2019), 3x case Auction-ID: A1-46623-20
Impact drill - screwdriver - angle grinder - impact wrench - including 2 batteries and, battery charger - handles impact drill and angle grinder - safety cover angle grinder. This in 2 suitcases. Auction-ID: A1-40256-81
4 piece cordless tool set; screwdriver, impact wrench, drill and grinder. Includes 2 batteries, charger and various accessories in case. Cordless power tools set Auction-ID: A1-40256-45
Category: Battery chargers and testing equipment set Manufacturer: Hoppecke / ACTM / MPS Model: 24V-100A / Gold-Plus / MP Slim Type: Industrial battery charger and battery tester assortment Technical Data: Battery Charger: Hoppecke 24V-100A Battery Testers: 2 pcs ACTM Gold-Plus intelligent battery testers Additional Charger: MPS Slim charger unit Jump Starter: Portable booster/starter device included Timer Device: Time-Precision T-P50 included Accessories: Accessories 1: Charging cables and clamps included Accessories 2: Power cables included Remarks: Sold as one lot only Remarks 2: Functionality not tested Remarks 3: Workbench not included Condition: Used Auction-ID: A7-45993-108
- screwdriver - Drilling machine - Impact wrench - angle grinder 1x Li-ion Battery Charger 1x Li-ion Battery 20V 2Ah 1x Li-ion Battery 20V 4Ah 5x Cutting disc 1x Drill set 9 Pcs 1x 1/4\" 65mm ADA 1x 1/2\"73mm ADA 1x Key Chuck Angle Grinder unused Auction-ID: A1-40256-119
Manufacturer: MBRAUN Model: MB-BL-01 Year of Manufacture: 2007 Type of Machine : Glove Box System Power Supply: 230 Vac / 16A / 50Hz / L/N/PE Cooling: Water cooling Certification: CE Glove Box Specifications: - Overpressure max: +20 mbar - Underpressure min: -20 mbar - Leak Rate: < 0.05 Vol% / h (ISO 10648 Class 1) Antechamber / Airlock: - Total Vacuum: 10⁻⁴ mbar - Leak Rate: 10⁻⁵ mbar l / sec Gas Purification System: - Working Gas: N₂ / Ar / He - H₂O / O₂ Residual Content: < 1 ppm H₂O / O₂ - Regeneration Pressure: 10⁻¹ mbar / sec - Operating Temperature: 15°C - 30°C Find more here - / Contact us at -
Start booster including wall mounting. Input: 21V/1A, 800A Peak current 499A Staring current Unused in box. Auction-ID: A1-40256-105
Cordless screwdriver and pen sander, various makes and designs, incl. chargers, some with battery Auction-ID: A7-46619-453
usava
Manufacturer: KOKI TEC Model: SELBO III 350 Type: Inline selective soldering machine Specifications - Outer dimensions: 2,750 (L) x 1,430 (W) x 1,300 (H) mm - Minimum PCB size: 100 (W) x 100 (L) mm - Maximum PCB size: 350 (W) x 400 (L) mm - PCB thickness: 0.8 to 2.0 mm - Maximum component height: top side 110 mm or less, bottom side 25 mm or less - Program steps: 400 steps, 100 files - Nozzle diameter: inner diameter 2 to 20 mm - Solder capacity: approx. 16 kg (specific gravity 7.3) - Nitrogen supply: 0.5 MPa, 25 L/min per pod - Air supply: 0.4 to 0.5 MPa - Power source: 3-phase AC 200V plus/minus 10 percent - Power capacity: 2 kVA (fluxer) / 14 kVA (heater) / 6 kVA (solder pot) - Net weight: 420 kg (fluxer) / 370 kg (heater) / 450 kg (solder pot) Find more here - / Contact us at -
usava
Manufacturer: KOKI TEC Model: SELBO III 5051 Type: Inline selective soldering machine Specifications - Outer dimensions: 3,236 (L) x 1,577 (W) x 1,300 (H) mm - Minimum PCB size: 100 (W) x 100 (L) mm - Maximum PCB size: 500 (W) x 510 (L) mm - PCB thickness: 0.8 to 2.0 mm - Maximum component height: top side 110 mm or less, bottom side 25 mm or less - Program steps: 400 steps, 100 files - Nozzle diameter: inner diameter 2 to 20 mm - Solder capacity: approx. 16 kg (specific gravity 7.3) - Nitrogen supply: 0.5 MPa, 25 L/min per pod - Air supply: 0.4 to 0.5 MPa - Power source: 3-phase AC 200V plus/minus 10 percent - Power capacity: 2 kVA (fluxer) / 20 kVA (heater) / 6 kVA (solder pot) - Net weight: 450 kg (fluxer) / 390 kg (heater) / 480 kg (solder pot) Key Features - Improved soldering quality with reduced solder defect rate - Inline automation for labor savings in PCB assembly - Modul ...
Manufacturer: KOKI TEC Series: ULTIMA (TakuROBO Benchtop Type) CE Mark: Registered on all three units System comprises: ULTIMA-TRZ + ULTIMA-SPZ + ULTIMA-PHS Suitable for: Prototype to small and medium volume PCB production ULTIMA-TRZ Selective Soldering Machine - Dimensions (without signal tower): 940 (L) x 885 (W) x 540 (H) mm - Outer dimensions (with signal tower): 940 (L) x 885 (W) x 753 (H) mm - Body dimensions: W620 x L940 x H442 mm - Minimum PCB size: 50 (W) x 50 (L) mm - Maximum PCB size: 250 (W) x 330 (L) mm - PCB thickness: 0.8 to 2.0 mm - Machine weight: approx. 120 kg - Power source: single-phase AC 200V plus/minus 5 percent, 4 kVA - Nitrogen supply: purity 99.99 percent or more, 0.4 to 0.5 MPa, 25 L/min - Solder pot capacity: approx. 16 kg (specific gravity 7.3) - Nozzle range: 17 sizes from diameter 2 to diameter 20 mm inner diameter, including Aerojet - nozzle - Stand ...
Manufacturer: NeoDen Model: IN8C Type of Machine : Reflow Oven - Heating zones: 8 total (4 upper / 4 lower) - Cooling fan: upper 4 - Controller: VGUS Microcomputer - Transmission: guide rails drive - Heating type: nichrome wire and aluminum alloy heating - Conveyor speed: 50 to 600 mm/min - Temperature range: room temperature up to 300 degrees C - Temperature accuracy: +/- 1 degree C - PCB temperature deviation: +/- 2 degrees C - Maximum soldering width (PCB width): 300 mm - Maximum soldering height: 30 mm upper / 15 mm lower - Length process chamber: 1354 mm - Heat-up time: 20 to 30 minutes - Operation direction: left to right - Power supply: AC 220 V, single phase - Starting power: 3.6 kW - Typical working power: approximately 1.5 kW - Machine dimensions: 1660 x 607 x 1075 mm (L x W x H) - Net weight: 241 kg - Gross weight: 308 kg Standard Accessories Included ...
Manufacturer: NeoDen Model: IN12C Type of Machine : Reflow Oven Technical Specifications -Heating zones: 12 total (6 upper / 6 lower) - Cooling fan: upper 4 - Controller: VGUS Microcomputer - Transmission: guide rails drive - Heating type: nichrome wire and aluminum alloy heating - Conveyor speed: 50 to 600 mm/min - Temperature range: room temperature up to 300 degrees C - Temperature accuracy: +/- 1 degree C - PCB temperature deviation: +/- 2 degrees C - Maximum soldering width (PCB width): 300 mm - Maximum soldering height: 30 mm upper / 15 mm lower - Length process chamber: 1354 mm - Heat-up time: 20 to 30 minutes - Operation direction: left to right - Power supply: AC 220 V, single phase - Starting power: approximately 4.8 kW - Typical working power: approximately 2.2 kW - Machine dimensions: 2300 x 650 x 1280 mm (L x W x H) - Net weight: 300 kg - Gross weigh ...
The ND56X is designed for R&D; enterprises, laboratories, and quality inspection rooms. It is a fully automatic defect inspection system suitable for a wide range electronic components and precision parts. CE certified and compliant with SEMI S2/S8 semiconductor industry specifications. X-Ray Tube Source Specifications - Type: sealed micro-focus X-ray tube - Voltage range: 40 to 90 kV - Current range: 10 to 200 uA - Maximum output power: 8 W - Micro focus spot size: 15 um Flat Panel Detector Specifications - Type: TFT Industrial Dynamic Flat Panel Detector (FPD) - Pixel matrix: 768x768 to 1536x1536 - Field of view: 65x65 to 130x130 mm - Resolution: 5.8 Lp/mm - Frame rate (1x1): 20 to 40 fps - A/D conversion: 16 bits Key Features and Functions - Automatic defect detection: size, area, broken wire, bridging and more - Customizable software algorithms: Y/N, crack, broken wir ...
Manufacturer: NeoDen Model: N10P Year of Manufacture: 2026 Type of Machine : Pick and Place Machine Technical Specifications - Number of heads: 8 (fully closed-loop control system) - Maximum placement speed: 20,000 CPH - Position accuracy: +/- 0.01 mm - Camera configuration: dual mark camera + front flying camera + IC camera - Component range (flying camera): 0201 to 22x22 mm - Component range (IC camera): 0201 to 40x40 mm - Maximum component height: 16 mm - PCB size minimum: 50x50 mm - PCB size maximum (without IC tray): 450x1500 mm - PCB size maximum (with IC tray): 395x1500 mm - PCB thickness: 0.2 mm to 3.5 mm - Feeder capacity (tape and reel): 80 positions (33 front + 47 rear) - IC tray feeder: 1 - Automatic nozzle change: yes, 39 nozzle positions - Support pins to hold PCB: optional - Power: 600 W, single phase, 220V/110V, 50Hz/60Hz - Air source: 0.6 to 0.8 MPa ...
150 € 
