Fabricante:
(Categoria: 102)
This 3-axis SMEC PL 25M was manufactured in 2017. It features a maximum workpiece diameter of 300 mm and a maximum workpiece length of 520 mm. The machine is equipped with a bar capacity of 75 mm through the spindle and offers a maximum spindle speed of 3500 rpm. If you are looking to get high-quality mill-turn capabilities, consider the SMEC PL 25M machine we have for sale. Contact us for further details.
Tailstock version, tool turret with 12 axial tool positions, fully automated tailstock 500 mm movable, bar passage on main spindle 65 mm, incl. KNOLL 240 S-1 chip conveyor
Circulation diameter over bed 500 mm, circulation diameter over support 270 mm, rotation diameter in offset 700, turning length 2000 mm, power 6.6 kW, torque 1200 Nm, workpiece weight max. 300 kg
Circulation diameter over bed 500 mm, circulation diameter over support 270 mm, rotation diameter in offset 700, turning length 2000 mm, power 6.6 kW, torque 1200 Nm, workpiece weight max. 300 kg
MAHO MH 500 E2 CNC universal milling machine with dialog control Manufacturer: MAHO AG, Pfronten (Germany) Model: MH 500 E2 Serial Number: 53855 Control: Philips / Heidenhain Dialog (older version) Design: Vertical milling machine with cross table Cladding: Machine enclosure with front door, plexiglass Table size: approx. 700 x 400 mm (estimated) Travels: X/Y/Z estimated approx. 500 x 350 x 400 mm Spindle holder: ISO/SK40 (common for this type) Connection: 3 x 400 V, coolant connection available Condition: • Used, functionally complete • Screen, emergency stop, controls available • Control not tested • Spindle & table mechanically complete
number of spindles:8 spindle passage:67 mmCam controlled multi spindle automatic lathe, used8 main spindlespick up in pos. 8threading attachmentCNC compound slide in pos. 5, also 2. speed in pos. 2Hydraulic spindle brake in pos. 4Incl. length measurement, incl. Brankamp cutting force monitoringtooling: could be different like picturesPlease, contact us for getting more informations and pictures on mail@tar-mc.com or www.tar-mc.com
Article: Vertical turning and grinding centreManufacturer: EMAGType: VSC 250 DSYob: 2008Control: SIEMENS 840DGrinding spindle speed: 30,000 rpmRotation spindle speed: 3,000 rpmTool places turret: 12Cooler for spindle and machine bed coolingCooling lubricant - lifting station (no independent cooling lubricant supply)Chip conveyorParts handling Air through the spindleTwo clamping circuits through the spindle (air and oil)Unfortunately, the grinding spindle is defective. However, this can be overhauled in a spindle factory. Otherwise the machine is in a very good condition and fully functional.Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
number of spindles:8 spindle passage:51 mmArticle: multi spindle automatic latheManufacturer: SchütteType: AF51Yob: 1987eight main spindlesmax. bar diameter D=51mmcontrol SIEMENS SIMATIC S5pick up in pos. 7, for rear machiningthread cutting driveindependent feed in positions 2/3electronical trip dog control ?Balluff?clear text display Wöhrlecoolant pumpmagnetic cartridge filteroil runningincl. bar loader IEMCA PRA 40/37/F, yob 1987, (bundle type)Painting in light blue and light greyThe configuration of tooling will be different like pictures.Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
Article: CNC-controlled multi-spindle automatic latheManufacturer: TornosType: MultiSwiss 8x26Yob: 2016full cross slide configuration,counter spindle,part-pre-drawing device,2 x driven tools,3 x Y-axis,1 rigid backworking,1 x driven backworking,2x 80 bar high pressure pumpsoptional: setting robot, manufacturer HandlingTech.The scope of delivery regarding the tooling equipment could be different like pictures.Please, contact us for getting more informations and pictures on mail@tar-mc.com or www.tar-mc.com
Article: CNC-controlled multi-spindle automatic latheManufacturer: TornosType: MultiSwiss 8x26Yob: 2019full cross slide configuration,counter spindle,part-pre-drawing device,2 x driven tools,1 rigid backworking,1 x driven backworking,2x 80 bar high pressure pumpsoptional: setting robot make HandlingTech.The scope of delivery regarding the tooling equipment could be different like pictures.Please, contact us for getting more informations and pictures on mail@tar-mc.com or www.tar-mc.com
number of spindles:6 spindle passage:51 mmSchutte SF51 DNT, yob. 1987, our ID #61868Article: cam-controlled multi-spindle automatic latheManufacturer: SchütteType: SF51 DNTYob: 1987Six-spindle automatic lathe with 6 main spindlesmax. nominal diameter D=51mmelectronic cam control Balluffgripper in position 6 for backworking, sorting chuteindependent longitudinal feed layer 5screw chip conveyorTapping couplingsInterface for: Bar feeder IEMCA PRABar feeder IEMCA PRA40/33/FScope of delivery without the blue chip conveyorThe tooling will differ from the scope of delivery!Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
Article: Programme-controlled automatic latheManufacturer: TraubType: TF60 / 140Yob: 1978Bar automatPlease, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
number of spindles:8 spindle passage:32 mmArticle: cam-controlled multi-spindle automatic latheManufacturer: SchütteType: AF32 S DNTYob: 1994Eight-spindle automatic lathe with 8 main spindlesmax. nominal diameter D=32mmcontrol: Siemens SIMATIC S7electronic cam control Balluffgripper in position 8 for backworkingCNC cross slide position 6CNC cross slide position 7Workpiece beltCoolant cooling SchimpkeChip conveyor with magnetic separatorTapping couplingsThe tooling shown may differ from the scope of delivery!Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
number of spindles:8 spindle passage:32 mmArticle: cam-controlled multi-spindle automatic lathe Manufacturer: SchütteType: AF32 DntYob: 1993eight-spindle automatic latheeight main spindlesfor bars up to D=32mmModernized control: Siemens SinumerikMotors: renewed modern motors suitable for modernized control systemElectronic trip dog control: BalluffCNC cross slide position 5 crossCNC cross slide position 6 crossPreparation for gripper in position 8 (gripper optional)Independent feedsThread cutting couplingsintegrated bar loader: Pietro CUCCHI; type: rack type magazineThe scope of delivery regarding the tooling equipment could be different like pictures.
Technical data Manufacturer: GILDEMEISTER Drehmaschinen GmbH Model: NEF 400 Machine Type: CNC Lathe Circumferential diameter over bed: 400 mm Circulation diameter over face slide: 270 mm Turning length: 650 mm Travel X: 220 mm Travel Z: 700 mm Spindle head: A6 (DIN 55026 A) Spindle bore: 65 mm Max. speed: 4,000 rpm⁻¹ Drive power (40/100% DC): 15 / 12 kW Tool stations: 8 Shaft cross-section: 20 x 20 mm Operating voltage: 400 V / 50 Hz Connected load: 22 kVA Fuse: 35 A Weight: approx. 2,800 kg Configuration Cross slide X/Z Ball screws X/Z: 32 x 5 mm Rapid traverse speed: 15 m/min Tailstock with MK4 Coolant device (140 l) Hydraulics (option)
turning diameter:38 mmArticle: CNC latheManufacturer: HanwhaType: STL38HYear of construction: 2013Control: Siemens 840SL for 8 axesMain spindle:max. turning diameter: 38mm; spindle bore max. 42mm, n max. 6,500 rpmPower max. 23 kW; C-axis with 0.001 degree; stroke Z1 320mm; synchronised guide bush unit; guide bush type JBS or SL38; type collet 173E / F48Counter spindle:max. pick-up diameter: 38mm, n max. 6,500 rpmPower max. 23 kW; C-axis with 0.001 degree; stroke Z2 320mm; type collet 171E / F42Tool turret:n max. 6,000 rpmPower max. 2.6 kW; Servo axes: X2, Y2, Z2; Stroke [mm]: X2 = 115, Y2 = 100, Z2 = 120Bar feeder FMB Turbo 5-55High-pressure station SFB-301 eco 150barPlease, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
spindle passage:25 mmArticle: CNC sliding headstock automatic latheManufacturer: TornosType: Deco 2000/20Year of construction: 2001Control: Fanucspindle diameter: D25 mmmax. speed: 7000 rpmcomb: 2 (X,Z,Y-axis)Front attachment: 1 (X,Z,S-axis)Loading magazine: Tornos Robobar SSFChip conveyor: Hinged belt conveyorother: various accessories such as polygonal impact device, HF spindlePlease, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
number of spindles:9 spindle passage:46 mmArticle: CNC-controlled multi-spindle automatic latheManufacturer: SchütteType: SC9-46Yob: 2016Six-spindle automatic lathe with 6 main spindles with max. nominal throughput D=46mm and 3 counter spindlesMain spindles: 6 motor spindles D46mm, 5. 000 rpm, 35 Nm to 80 NmCross slide units, transverse: 6 units, in positions I to VI,Slide units, longitudinal: 5 units, in positions I to V, Slide units, longitudinal: 5 units, in positions I to V,Counter spindles: 3 units, one each in positions VI, VIII and IX, 7. 500 rpmCross slide units, transverse: 2 units, in positions VIII and IX,Control:Siemens SINUMERIK 840SL with double NCUSoftware: Schütte SICS, Sinomerik Operate 4.5, Safety Integreted,Spindle coupling package ?CP-Expert?, for up to 8 spindle couplings (maximum expansion)Synchronous action package ?Level? 2, incl. cross-mode actions/ASUP (maximu ...
turning diameter:26 mmArticle: High-precision CNC lathe with linear cross slideManufacturer: BenzingerType: GOFuture B1Yob: 2015Machine was only used for reworking, so only light machining work was carried out!Control: Siemens Sinumerik 840DslMain spindle: maintenance-free motor spindleBar capacity: D26mmChip processing container with coolant pump: 30l/min at 5barLoading and unloading device type IBAdditional gripper system for placing the workpieces in the correct position on the unloading conveyorCoaxial valve for coolant to the linear tools (3 pieces)Internal clamping deviceC-axis main spindle for digital control incl. Transmit functionAdjusting microscope 16x magnificationCoolant supply through the clamping cylinder of the spindle,sealing air,Speed increase of the motor spindle to 8,0000 rpmNordmann tool monitoringProfibus master interfaceHinged belt conveyor KnollCompact coolant dev ...
turning diameter:26 mmArticle: High-precision CNC lathe with linear cross slideManufacturer: BenzingerType: GOFuture B1Yob: 2016Machine was only used for reworking, i.e. only light machining work was carried out!Control: Siemens Sinumerik 840DslMain spindle: maintenance-free motor spindleBar capacity: D26mmLoading and unloading device type IBAdditional gripper system for placing the workpieces in the correct position on the unloading beltCoaxial valve for coolant to the linear tools (3 pieces)Internal clamping deviceC-axis main spindle for digital control incl. transmit functionAdjusting microscope 16x magnificationCoolant supply through the spindle clamping cylinder,Sealing air,Speed increase of the motor spindle to 8. 0000 rpmNordmann tool monitoringProfibus master interfaceHinged belt conveyor KnollCompact coolant device KnollMBE interfaceSmall fire extinguishing system Kraft & BauerN ...
number of spindles:8 spindle passage:20 mmArticle: cam-controlled multi-spindle automatic lathe Manufacturer: SchütteType: AG20Yob: 2002eight-spindle automatic lathe8 main spindlesfor bars up to D=20mmcontrol: Siemens 840D1x polygonal turning/thread milling device (new 2011)1x polygonal turning/thread milling device for long turning (new 2011)1x thread cutting/quick drilling spindle (new 2011)1x pick-up device incl. various pick-up collets 4 cnc-cross slidesDouble cross slide in position 7Loading magazine PRA 52/P type 33 (bar length 3m), year 2004High-pressure system Knoll SF 2000/Turbo-3 up to 100 bar, year 2004Tool monitoring BrankampAir conditioning unit Rittal in the front switch cabinetincl. spare parts package with various collets, cams and various tool holders for longitudinal and cross slidesThe machine has been run with oil and has processed brassPlease, contact us for getting ...
number of spindles:6 Article: cam-controlled multi-spindle automatic lathe Manufacturer: SchütteType: SFH130Yob: 1995six-spindle automatic lathe6 main spindles as a chucker automatic lathecontrol Siemens S7-200 PLCDnt driveloading and disloading in position 6additional cooling pump with magnetic spark plug filterPlease, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
number of spindles:6 Article: cam-controlled multi-spindle automatic lathe Manufacturer: SchütteType: SG18Yob: 1999six-spindle automatic lathe6 main spindles as a chucker automatic lathecontrol Siemens S7-200 PLCloading and disloading in position 6spindle brakePlease, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
number of spindles:6 spindle passage:20 mmArticle: cam-controlled multi-spindle automatic lathe Manufacturer: GildemeisterType: GS20-6Yob: 1989six-spindle automatic lathe8 main spindlesfor bars up to D=20mmAll cross units are equipped with a tool holder (from Gildemeister or IMG Attachments)All longitudinal units are equipped, either fixed or rotating (without collets)An independent feed is installed at position 1A gear set for one speed is installedA gear set for one cycle time is installedThe scope of delivery regarding the tooling equipment could be different like pictures.Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
Technical data Manufacturer: WEILER Machine Tools Model: Intern 160 Machine Type: Conventional lathe Circumferential diameter over bed: 320 mm Circumferential diameter over face slide: 192 mm Circumferential diameter over face slide with T-groove: 175 mm Tip height: 160 mm Turning length between tips: 650 mm Bed width: 205 mm Spindle passage: 40 mm Spindle speeds: 48 – 2500 1/min (8 steps) Drive power: 2.4 / 3 kW Engine speed: 1500 / 3000 1/min Chuck diameter max.: 165 mm Face plate max.: 270 mm Configuration Tailstock with MK3 Quill stroke: 85 mm Facing slide travel: 150 mm Upper slide travel: 140 mm Swivel range upper slide: +90° / -75° Accessories: GARANT three-jaw chuck 24 feed stages Metric thread pitches 0.25 – 8 mm
Center width: approx. 1000 mm, rotation diameter over bed: approx. 410 mm, circulation over face slide: approx. 250 mm, spindle bore: approx. 52 mm, speed range: multi-stage, approx. 40 - 2,000 rpm
number of spindles:6 spindle passage:20 mmArticle: cam-controlled multi-spindle automatic lathe Manufacturer: GildemeisterType: GS20-6Yob: 1989six-spindle automatic lathe8 main spindlesfor bars up to D=20mmAll cross units are equipped with a tool holder (from Gildemeister or IMG Attachments)All longitudinal units are equipped, either fixed or rotating (without collets)A gear set for one speed is installedA gear set for one cycle time is installedThe scope of delivery regarding the tooling equipment could be different like pictures.Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
number of spindles:6 spindle passage:20 mmArticle: cam-controlled multi-spindle automatic latheManufacturer: SchütteType: SF20 S DntYob: 1999Six-spindle automatic lathe with 6 main spindlesmax. nominal diameter: D=20mmSpindle drum hirth coupled,CNC cross slide in positions 4,CNC cross slide in positions 5,pick up in position 6, sorting chute, 1x independent feed,thread cutting couplings,workpiece belt,Coolant tank with hinged belt chip conveyor Ruez,Oil/steel operation,PLC Siemens S7, Siemens CNC control, Siemens Simodrive 611,The scope of delivery regarding the tooling equipment could be different like pictures.Interface for: IEMCA PRA bar loading magazine (optional: IEMCA PRA40/31/ built in 1997 rear loader)
number of spindles:8 spindle passage:32 mmArticle: cam-controlled multi-spindle automatic latheManufacturer: SchütteType: AF32 S DntYob: 1996Eight-spindle automatic lathe with 8 main spindlesmax. nominal diameter: D=32mmSpindle drum with hirth couplingconfigurable as 2x4 spindles, pick up preparing in positions 4 and 8Thread cutting couplingsElectronic cross slide adjustment in positions 1, 2, 5, 6;2 independent feedsInterface for: IEMCA PRA bar loading magazine (optional I: IEMCA PRA40/42/P)Coolant tank with hinged chip conveyorControl: Siemens S7-300 PLCDisplay device: Siemens Simatic HMIDelivery without BDETooling included in the scope of delivery may differ from the imagesPlease, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
Feed X/Y 4 m/min, Rotation diameter over bed 320 mm, Rotation diameter over face slide 150 mm, Chuck diameter 200 mm, Spindle head size 6 according to DIN, Spindle holder MK6, Drive power 7 kW, Tool carrier MULTIFIX size B, Quill holder MK5, Quill diameter 70 mm
GINDUMAC GmbH
15.500 € 
