serras usadas para venda (1,291)

cutting diameter: 225 mmsaw band length: 2480 mmcutting width: max. 245 x 150 mmvoltage: 230 Vpower capacity: 1,5 kWdimensions of saw-band: 2480 x 27 x 0,9 mmmitter cutting: 0 - 60 °cutting speed: 20 - 90 m/minweight of the machine ca.: 185 kgdimensions of the machine ca.: 1,4 x 0,69 x 1,7 m- stepless speed- stepless feed- miter cut- Bi-metal saw band- Material stop- Machine base- Coolant deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Diâmetro da lâmina de serra: 275 mmdiâmetro de corte: bis 90 mmfaixa de corte plana: 120 x 75 mmvelocidades de giro: 40/80 U/mincorte da esquadria: 45/90/-45 peso da máquina ca.: ca. 150 kgAlimentaçãomanual da lâmina de serra Acessórios: Dispositivode refrigeração Estrutura inferior com 2 gavetas

cutting diameter: 315 mmdimensions of saw-band: 3460 x 1,1 x 34 mmcutting speed: 35 / 70 m/mincutting width: 400 x 250 mm: 250 / 280 mmImpact energy: 220 / 280 mm: 180 mm: 140 mmconnected load frequency: 400 Volttotal power requirement: 2,2 kWweight of the machine ca.: 0,6 tdimensions: 2,1 x 1,0 x 1,5 mSemi-automatic miter band saw- Miter cuts up to 45° left + right- Miter cuts up to 60° right- Vice with quick release device- Tape tension control via manometer- Electr. automatic coolingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 350 mmcapacity 90 degrees: round: 100 mmcapacity 90 degrees: square: 100 mmcapacity 90 degrees: flat: 100 x 195 mmcapacity 45 degrees: round: 100 mmcapacity 45 degrees: square: 100 mmcapacity 45 degrees: square: 100 x 135 mmsaw blade turning speeds: 2800 U/mintotal power requirement: 1,5 kWweight of the machine ca.: 250 kgdimensions: 0,7 x 0,7 x 1,4 mATTENTION: SPECIAL PRICE - Miter left/right 45° - fixed locking points at the most important miter angles - Pneumatic double clamping device - Safety engine brake - Complete with fog spray device and machine baseThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 250 mmsaw band length: 2950 x 27 x 0,9 mmtable height: ca. 800 mmband speed: 36/72 m/mintotal power requirement: 1,5/1,8 kWweight of the machine ca.: 0,37 tdimensions of the machine ca.: mMEP sawing machine:Saw band bow, vice unit and base made of durable cast ironPrecision grade marking on the cast iron structureElectrical system (with fully identifiable electrical wiring andLow voltage system 24 V)Switch handle IP 55 for manual cycles (if available)Rotating scraper brush for the saw bandClamping unit with vice for quick approachAccurate stops with adjustment for miter cuts at 0°, 45°, 60° leftBi-metal saw band 2950 x 27 x 0.9 mmKeys, instructions for use and instructions for ordering spare parts in theUser languageSHARK 281 with manual operation and SHARK 281 CCS with manual operation and cuttingwith automatic head feed by its own weight.CCS (Cut Control System) w ...

capacity 90 degrees: round: 255 mmcapacity 90 degrees: square: 240 mm: 300 x 180 saw band length: 2.765 x 27 x 0,9 mm mmtable height: 870 mmband speed: 18 - 110 m/mintotal power requirement: 1,5/1,8 kWweight of the machine ca.: 0,63 tdimensions of the machine ca.: 1,8 x 1,85 x 1,85 mMiter band saw, fully automatic GBS 250 Super VA-I MPS• Miter left. 45° automatic operation• Miter left. 60° semi-automatic operation(cuts without programming)• Shockproof and ergonomic control panelwith oil-proof EPDM cover a.• Material height sensor c.(Automatic cut start detection)• Frame and gearbox made from one piece,very quiet cutting and very low vibration• Chip tray can be removed (disinfection)• Easy access to the saw, material and feed unit• Foldable safety cover• Fine feed adjustment• Semi-automatic. Cut!Saw automatically with microprocessor controlAdjustable for 2 program l ...

capacity 90 degrees: round: 250 mmcapacity 90 degrees: square: 210 mm: 290 x 210 mmsaw band length: 2.965 x 27 x 0,9 mm mmtable height: 940 mmband speed: 35 / 70 m/mintotal power requirement: 1,1/1,3 kWweight of the machine ca.: 0,35 tdimensions of the machine ca.: 1,3 x 0,8 x 1,5 mSPECIAL PRICE!Double miter metal band saw hydraulic semi-automatic with: - Hydraulic vice - Material height button - Cut monitoring by ammeter - Cutting pressure feed regulator - Belt speed 34 / 74 m/min - Miter cuts up to 60° left and 45° right - Patented, ball-bearing turntable for easy miter adjustment - Adjustable quick-release vise - Quick release lever - Automatic coolingShare of freight costs 120 EURThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 680 mmcapacity 90 degrees: square: 640 mm: 1250x600 mmcapacity 45 degrees: round: 680 mmcapacity 45 degrees: square: 600 mmcapacity 45 degrees: flat: 870x600 mmcapacity 60 degrees: round: 580/550 mmcapacity 60 degrees: square: 530/450 mmcapacity 60 degrees: flat: 550x450 mmsaw band length: 8140 x 54 x 1,6 mmband speed: 15 - 90 m/mintable height: 855 mmtotal power requirement: 7,5 kWweight of the machine ca.: 5,3 tdimensions of the machine ca.: 5,75 x 4,2 x 2,75 m2-column double miter band saw for quick cuttingwith pusher system P15. Option P30Hydraulic saw frame lowering• NC controlled• Automatic angular positioning from + 60° to – 60°High quality automatic miter adjustmentSpecial development for cutting profiles and beams.The highest positioning accuracy is achieved via the new B&S positioning system”.reached. An intelligent NC control ensures smoot ...

capacity 90 degrees: round: 680 mmcapacity 90 degrees: square: 640 mm: 820x610 capacity 45 degrees: round: 550 mmcapacity 45 degrees: square: 550 mmcapacity 45 degrees: flat: 550x600 mmcapacity 60 degrees: round: 370 mmcapacity 60 degrees: square: 370 mmcapacity 60 degrees: flat: 370x600/450 mmsaw band length: 7260 x 41 x 1,3 mmband speed: 15 - 100 m/mintable height: 800 mmtotal power requirement: 5,5 kWweight of the machine ca.: 4,8 tdimensions of the machine ca.: 5,85 x 3,7 x 2,7 m2-column double miter band saw for quick cuttingwith pusher system P15. Option P30Hydraulic saw frame lowering• NC controlled• Automatic angular positioning from + 60° to – 60°High quality automatic miter adjustmentSpecial development for cutting profiles and beams.The highest positioning accuracy is achieved via the new B&S positioning system”.reached. An intelligent NC control ensures smooth inter ...

: 1000 mm: 1000 mm: 1200x1000 mmsaw band length: 11300 x 80 x 1,3 mmtable height: 790 mmband speed: 14 - 60 m/mintotal power requirement: 18 kWweight of the machine ca.: 9,0 tdimensions: 5,0 x 1,68 x 3,15 mThe semi-automatic, hydraulic saws from the X-tech line offer the bestSaw technology and best performance when cutting special steels• The electro-welded machine frame and the steel saw frame meet requirements all cutting needs and eliminate vibration and noise.• The chip conveyor is hydraulically driven and the speed is adjustable• All movements of the machine (saw frame, vice, feed, Saw band guides) are carried out thanks to modern linear guides with high static and dynamic load performance, which also has very low sliding friction to guarantee.• Another characteristic feature is the roles for the Positioning of the material by a hydraulic motor are driven. They ...

cutting diameter: 250 mmcapacity 90 degrees: flat: 280 x 220 mmcapacity 90 degrees: square: 220 x 220 mmturning speed range:: 36 / 72 m/mindimensions of saw-band: 2950 x 25,4 x 0,9 mmweight of the machine ca.: 0,4 tDimensions (LxWxH): 1,5 x 0,9 x 1,5 Semi-automatic function:Vice closes and motor starts, saw head lowersfor the cut, motor switches off, saw head rises,Vise opens.Some features: New centralized switch console on an articulated arm. Latest generation hydraulic control unit, highly powerful and with low energy consumption. Base frame with pull-out coolant container.The machine complies in all areas CE regulations!The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 105 mmcapacity 90 degrees: square: 100 mm: 100 x 105 dimensions of saw-band: 1335 x 13 x 0,65 mmdimensions: 650 x 310 x 300 mband speed: 30 - 80 m/mintotal power requirement: 0,95 kWweight of the machine ca.: 18 kgAction PriceBerg & Schmid - assembly band saw PBS 90 ESCPowerful and particularly robust metal band saw withDie-cast aluminum saw table and stepless cutting speed forMiter cuts up to 60°Share of freight costs: EUR 25.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diâmetro do rolo: NA mmgarganta: NA mmaltura da peça: mmárea de trabalho: 200 mmdiâmetro da peça: 200 mmrequisito de potência total: kWpeso da máquina ca.: tdimensões da máquina ca.: mSerra de fita para açougueiro

saw blade diameter: 355 mmcapacity 90 degrees: round: 115 mmcapacity 90 degrees: square: 120 x 106 mmcapacity 90 degrees: flat: 102 x 197 mm: 25,4 mmconnected load frequency: 230 Vtotal power requirement: 2,3 kWweight of the machine ca.: 28 KgDimensions (LxWxH): 0,6 x 0,35 x 0,45 mMachine for cutting pipes and profiles made of steel, light metal,Plastic, non-ferrous metal and composite materials.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 250 mmcapacity 90 degrees: round: 80 mmcapacity 90 degrees: square: 70 mmcapacity 90 degrees: flat: 95x60 mmcapacity 45 degrees: round: 70 mmcapacity 45 degrees: square: 60 mmcapacity 60 degrees: flat: 65x60 mmtotal power requirement: 1,0 kWweight of the machine ca.: 0,075 tdimensions of the machine ca.: 0,3 x0,8 x0,75 mSPECIAL PRICE!The ideal metal circular saw for workshop and assembly• For miter cuts left up to 45°• For sawing steel, stainless steel and, to a limited extent, aluminum profiles• Spindle vice with double clamping arm for low-burr cuts• Optionally with 230 V or 400 V motor• Automatic cooling directly on the saw blade• Double bearing for saw head• 24 V safety switch in the handle with restart lock• Length stop, assembly tool• Subframe (option) additional price 172,-EURATTENTION: Price is without saw blade! (saw blade price EUR 62,-EUR ...

cutting diameter: 250 mmsaw band length: 2950x27x0,9 mmtable height: mmband speed: 36/72 m/mintotal power requirement: 1,8 kWweight of the machine ca.: 440 kgdimensions of the machine ca.: mBasic equipment:Vice with quick adjustment and adjustable guide barsHydraulic band tensioning device with tensioning pressure displayBase frame with removable coolant trayChip clearing brushPrecision stops set for cuts of: 0°, 45° and 60° left and 45° rightTurntable for double miter cutsElectric coolant device 48 V(A micro spray device can be installed)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 900 mm: 900 mm: 900x900 mmsaw band length: 9300 x 67 x 1,1 mmtable height: 790 mmband speed: 14 - 60 m/mintotal power requirement: 11 kWweight of the machine ca.: 8,45 tdimensions: 4,485 x 1,68 x 3,15 mThe semi-automatic, hydraulic saws from the X-tech line offer the bestSaw technology and best performance when cutting special steels• The electro-welded machine frame and the steel saw frame meet requirements all cutting needs and eliminate vibration and noise.• The chip conveyor is hydraulically driven and the speed is adjustable• All movements of the machine (saw frame, vice, feed, Saw band guides) are carried out thanks to modern linear guides with high static and dynamic load performance, which also has very low sliding friction to guarantee.• Another characteristic feature is the roles for the Positioning of the material by a hydraulic motor are driven. They m ...

capacity 90 degrees: round: 310 mmcapacity 90 degrees: square: 280 mm: 400x250 saw band length: 4020x34x1,1 mmband speed: 18 - 100 m/mintable height: 890 mmtotal power requirement: 2,2 kWweight of the machine ca.: 0,99 tdimensions of the machine ca.: 1,85 x 2,2 x 2,0 mMiter band saw, fully automatic, GBS 310/400 VA-I CNC• miter left 45° automatic operation• miter left 60° semi-automatic operation (cuts without programming)• Material height sensor (automatic cut start detection)• Frame and gear made from one piece, very quiet cut and very low vibration• Removable chip tray (disinfection)• Shockproof and ergonomic control panel with oil-resistant EPDM cover• Top access to the saw, material and feed unit• Hinged safety cover• Fine feed adjustment• Semi-auto. Cut!• Optimize work processes with CNC control Possibility to enter various parameters such as quantities an ...

capacidade 90 graus: redondo: 250 mmcapacidade 90 graus: quadrado: 240 mm: serra comprimento da banda: 2965 x 27 x 0,9 mmaltura da mesa: mmvelocidade de banda: 37 / 76 m/minpotência total necessária: 1,0 kWpeso da máquina ca.: 0,38 tdimensões da máquina ca.: 1,0 x 1,6 x 1,4 mserra de fita dupla de esquadria

cutting diameter: 360 mmsaw band length: 5050 x 41 x 1,3 mmcutting width: 1,3 mmcutting speed: 15-100 m/mintotal power requirement: 4 kWweight of the machine ca.: 2,8 tdimensions of the machine ca.: 3,0x 2,6 x 2,2 mThe X-SMART 4 is an automatic 2-column band saw suitable for straight cuts in solid materials with a diameter of up to 360 mm.Other features include:4 kW drive motor with 41 mm saw blade widthModern 7 touchscreen CNC controlInclined saw frameSolid 2-column structureLinearly guided material sensorHydraulic cutting pressure regulation500 mm feed unitDouble vise2 vises in front of and 2 vises behind the saw bladeElectrically driven chip conveyorCleaning gunFull enclosureLED work lightMinimum remnant length 100 mmOptionally available:Bundle clamping device, MMS and roller conveyorsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 125 mmcapacity 90 degrees: square: 125 mm: 127 x 125 mmdimensions of saw-band: 1435 x 12,7 x 0,65 mmband speed: 38 - 80 m/mintotal power requirement: 0,95 kWweight of the machine ca.: 18 kgdimensions: 720 x 380 x 450 mBoth straight and miter cuts can be made at angles between 45 and 90 degrees.With the metal band saw you not only work precisely, but also quickly: the band speed can be variably adjusted between 38 and 80 meters per minute.With a weight of only 25 kilograms, the saw can be used mobile.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 305 mmcapacity 90 degrees: square: 260 mm: 350x200 saw band length: 3375x27x0,9 mmband speed: 18 - 100 m/mintable height: 880 mmtotal power requirement: 1,5/1,8 kWweight of the machine ca.: 0,84 tdimensions of the machine ca.: 1,85 x 1,9 x 2,0 mDemonstration system for a SPECIAL PRICEFully automatic miter band saw• miter left 45° automatic operation• miter left 60° semi-automatic operation (cuts without programming)• Material height sensor (automatic cut start recognition)• Frame and gear made from one piece, very quiet cut and very low vibration• Removable chip tray (disinfection)• Shockproof and ergonomic control panel with oil-resistant EPDM cover• Top access to the saw, material and feed unit• Hinged safety cover• Fine feed adjustment• Semi-auto. Cut!• Optimize work processes with CNC control Possibility to enter various parameter ...

cutting diameter: 225 mmsaw band length: 2455 mmtable height: 850 mmcutting width: 245 x 150 mmcutting speed: 45/90 m/mindimensions of saw-band: 2480 x 27 x 0,9 mm: 90 mm: 90 mm: 145 mmImpact energy: 145 mmconnected load frequency: 400 Volttotal power requirement: 1,5 kWweight of the machine ca.: 0,2 tdimensions: 1,43 x 0,72 x 1,7 mMiter band saw-Miter cuts up to 60° left-Vice with quick clamping device-Band tension control-Electr. Automatic coolingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 220 mmsaw band length: 2450 x 27 x 0,9 mmtable height: 915 mmband speed: 35 + 70 m/minconnected load frequency: 400 Vcapacity 90 degrees: round: 220 mmcapacity 90 degrees: square: 210 x 210 mmcapacity 90 degrees: flat: 230 x 185 mmtotal power requirement: 1,2 kWweight of the machine ca.: 240 kgdimensions of the machine ca.: 870 x 1550 x 1740 mmThe Zimmer Z241/R is a self-lowering saw for miter cuts from 0 ° -60 ° left. After the cut, the machine stays through oneSafety limit switches stand. The reduction is infinitely variableHydraulic system adjustable. The saw arm can be raised after the cutany position. The saw arm remains at the desired positionstand.The Z241 / R has the following features:Hydraulic cylinder, emulsion pump, eccentric tensioner, base, saw band, 400VConnector -16A-The machine is completely assembled and delivered ready for use.The data for this ad w ...

cutting diameter: 300 mmsaw band length: 3320 x 27 x 0,9 mm mmcutting width: 300 mmControl: NC capacity 90 degrees: flat: 330x 260 mmcapacity 90 degrees: square: 260 x 260 mmcapacity 45 degrees: square: 250 mmcapacity 45 degrees: flat: 270 x 200 mmcapacity 60 degrees: round: 180 mmcapacity 60 degrees: square: 170 mmband speed: 15 - 100 m/mintotal power requirement: 2,2 kWweight of the machine ca.: 1,1 tdimensions of the machine ca.: 3,3 x 2,83 x 2,23 mFurnishing:- fully automatic electro-hydraulic band saw with additional semi-automatic, semi-automatic-dynamic and manual operation- Automatic cycle (cuts from 0° to 60° left) - Semi-automatic, semi-automatic-dynamic and manual cycle (cuts from 45° right to 60° left)- Manual or semi-automatic dynamic cycle to make cuts outside of series production can be carried out directly without programming.- Numerically controlled band saw mac ...

saw blade diameter: 350 mmcapacity 90 degrees: round: 120 mmcapacity 90 degrees: square: 105 mmcapacity 90 degrees: flat: 180 x 70 mmcapacity 45 degrees: round: 120 mmcapacity 45 degrees: square: 100 mmcapacity 45 degrees: square: 135 x 60 mmsaw blade turning speeds: 1700 / 3400 U/mintotal power requirement: 1,5/2,2 kWweight of the machine ca.: 0,285 tdimensions: 1,2 x 1,4 x 1,4 mSemi-automatic circular saw for sawing solid and aluminumHollow iron materials and light metal alloys with electro-weldedCarbide toothed washer.Machine for miter cuts from 45° right to 45° left. Through theAlignment along the vertical is possibleSawing operations with the head inclined between 0° and 45° to the left.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 130 mmcapacity 90 degrees: round: 130 mmcapacity 90 degrees: square: 120 mmcapacity 90 degrees: flat: 180 x 100 mmcapacity 45 degrees: round: 115 mmcapacity 45 degrees: square: 100 mmcapacity 45 degrees: flat: 120 x 100 mmengine: 3,3 / 4,4 KW0: 1400 / 2800 U/minweight of the machine ca.: 1060 kgdimensions: 2,5 x 1,8 x 1,85 mTIGER 402 CNC HR, automatische elektromechanische Vertikalkreissäge für denEinsatz von Hartmetall – Sägeblättern, um Serienschnitte von 45° rechts bis60° links auszuführen.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 220 mmsaw band length: 2455 mmtable height: 850 mmcutting width: 230 mmcutting speed: 35 + 70 m/mindimensions of saw-band: 2455 x 27 x 0,9 mm: 90 mm: 90 mm: 90 x 100 mm: 150 Impact energy: 150 Air consume per blow: 150 x 210 : 220 mmstroke back stop: 210 mmcross-slide: 230 x 185 total power requirement: 1,2 kWweight of the machine ca.: 0,24 tdimensions of the machine ca.: 1,2 x 0,6 x 1,7 mSPECIAL PRICE!-Miter cuts up to 60° left-Cutting speed 35 / 70 m / min.- Vice with quick release device-Carbide saw band guide-Tape tension control-Electr. automatic coolingAuto-Cut-System = 3 step system-Automatic saw frame lowering via the hydraulic cylinder-Infinitely adjustable feed-with limit switch- rapid lowering of the saw frame from the rest position to the workpiece, then switch to normal saw feed-Manual modeShare of freight costs 85 EURThe data for this ad was created with ...

cutting diameter: 220 mmband length: 425 mmcutting lenght max.: 2500 mmtotal power requirement: 0,95 kWweight of the machine ca.: 219 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Wheel diameter: 680 mmsawblade length: 8550 mmSawblade width max.: 1,3 mmCutting height: mmMotor output: 20 kWTable dimensions: 600 x 620 mmFeed speed: m/min.Machine height: mmWeight: 10.000 kgBandsaw horizontal, Precision-Saw for Silicon (Solar industry)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.