Pressa de dobra, ITALPRESSE mod. PHF 60 - Regras CE - Platens dim. mm. 1600X1100 - N. 4 cilindros - Abertura máxima de 1000 - Motores no máximo 1,5 kW - Volt. 380/50 - Ano 2001
100 € adicionar à lista de observados
230V / 400V Foot and hand control. In working order. Auction-ID: A3-46152-6138
Prensa tipo JJZ-CP projetada para a produção de compensado, portas, MDF. Os elementos colados são alimentados e removidos da prensa automaticamente por meio de rolos acionados. A prensa pode ser usada com alimentadores de cola. Especificações: -pressão máxima 500T/ ajustável/ - altura máxima da carga: 1300mm -tamanho máximo do lote 1300x2500 - tamanho da prensa 3600x1370x4500 mm - fundação da prensa ~ 500 mm abaixo do nível do chão -mesa de alimentação 2000x1960 mm -mesa de receção 2350x2500 mm -potência máxima 13.2 kW -Ce -capacidade de 6 lotes por hora Atualmente, colamos portas de painel e placa de MDF em prensas. Muito bom estado técnico. Oferecemos uma linha de produção de contraplacado dedicada a estas prensas.
1.400 € adicionar à lista de observados
- Four-column hydraulic press for pressing and die-cutting operations. - Nominal force 15 T. - Work table 1500 x 1200 mm. - Maximum opening approximately 1600 mm. - Four-column structure with vertical guide of the moving plate. - Upper hydraulic unit integrated into the structure. - Total installed power 11 KW. - Electrical panel with SIEMENS PLC. - Perimeter security guards with front access. - Integrated control desk and control panel. - Operating conditions of this item: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-48840-5
ESPECIFICAÇÕES: Prensagem a frio Mesa de trabalho mm: 2500 x 1300 No. 4 pistões Curso vertical: 450 mm
11.500 € adicionar à lista de observados
- Nominal force 400 T. - Dimensions of the work table approx. 1900 x 1500 mm. - Carriage stroke approx. 1600 mm. - The electrical control panel is incomplete; The rest of the machine's electrical installation remains installed. - Installation with access platforms for maintenance of the upper equipment. - Operating conditions of this item: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-48840-4
Prensa de gravação em relevo - máquina de gravação em relevo Hidráulica Superfície de compressão, 600 x 2700mm Superfície de compressão aquecida
16.500 € adicionar à lista de observados
- Automated compression molding line composed of pre-press, main press, automatic loading and unloading system. - Hydraulic pre-press with clamping force 200 t. - Prepress work table 1900 x 1000 mm. - Approximate maximum opening of the prepress 1700 mm. - Main hydraulic press with closing force 600 t. - Main press worktable 2100 x 1600 mm. - Maximum aperture approximately 1750 mm. - Automatic parts loading system. - Automatic unloading system by means of an ABB 6-axis industrial robot equipped with handling tools for the extraction of parts. - Perimeter protection cabin with safety guards and interlocks. - Integrated electrical control panel and control desks. - Installation with access platforms for maintenance of the upper equipment. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those ...
ESPECIFICAÇÕES: Pressão hidráulica para elementos dobrados Dimensões da mesa de trabalho mm: 3000 x 1600 Número de pistões: 2 diâmetros Ø 200 mm Pistão traçado mm: 1400 - Cerca -Bomba de óleo - 02 Aberturas de saída de vapor
16.500 € adicionar à lista de observados
- Automated compression molding line composed of pre-press, main press, automatic loading and unloading system. - Hydraulic pre-press with clamping force 200 t. - Prepress work table 1900 x 1000 mm. - Approximate maximum opening of the prepress 1700 mm. - Main hydraulic press with closing force 600 t. - Main press worktable 2100 x 1600 mm. - Maximum aperture approximately 1750 mm. - Automatic parts loading system. - Automatic unloading system by means of an ABB 6-axis industrial robot equipped with handling tools for the extraction of parts. - Perimeter protection cabin with safety guards and interlocks. - Integrated electrical control panel and control desks. - Installation with access platforms for maintenance of the upper equipment. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those ...
Prensa hidráulica Pellegrini Água quente Área de prensagem 4000 mm x 1300 mm aplicação manual de cola incl. Tabela de inserção Aceitação: Vácuo - Empilhadora de Gantry SIRIO
3.600 € adicionar à lista de observados
- Nominal force 400 T. - Maximum working pressure of the hydraulic system 25 MPa. - Dimensions of the work table approx. 2050 x 1600 mm. - Carriage stroke 1500 mm. - Maximum tool dimensions 2000 x 1300 x 600 mm. - Approach speed 500 mm/s. - Working speed 10-100 mm/s. - Return speed 500 mm/s. - Total installed power 52.50 kW. - Electrical control panel with regulation of process parameters. - Perimeter protection cabin with safety guards and interlocks. - Installation with access platforms for maintenance of the upper equipment. - Operating conditions of this item: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-48840-3
100 € adicionar à lista de observados
Not working - electrical fault. Power: 9.5kW Auction-ID: A3-46152-6144
1.400 € adicionar à lista de observados
- Nominal force of 15 T. - Work table of approximately 1500 x 1200 mm. - Maximum opening approximately 1600 mm. - Ø 80 mm main thrust cylinder. - Four guide columns of Ø 95 mm. - Drive by upper hydraulic group with electric motor. - Equipped with SIEMENS SIMATIC OP7 control panel, PILZ safety controller and RAYTEK pyrometers for temperature control. - Electrical panel integrated into the machine. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. - Operating conditions of this item: unchecked. Auction-ID: A7-48840-9
1.700 € adicionar à lista de observados
- Nominal force of 50 T. - Work table of approximately 1400 x 1000 mm. - Maximum aperture approximately 1150 mm. - Main thrust cylinder of Ø 150 mm. - Four guide columns of Ø 95 mm. - Drive by upper hydraulic group with electric motor. - Equipped with SIEMENS SIMATIC control panel, PILZ safety controller and OMRON electronic controllers. - Electrical panel integrated into the machine. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. - Operating conditions of this item: unchecked. Auction-ID: A7-48840-8
pressure: 250 tdistance between columns: 600 mmstroke: - mmtotal power requirement: 22 kWweight of the machine ca.: 9 tdimensions of the machine ca.: 2 x 2 x 3,2 mNo. 3421Mould press 2500 / 700 kNSingle stroke 2-handSingle stroke foot switchAutomatic continuous run set-up and tippingTable 500 x 500Working range: Pressure capacity 250 tonnesDrive: ^22The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 200 ttable surface area: 2100 x 1400 mmpassage width: 2122 mmtotal power requirement: 60 kWweight of the machine ca.: 35 tdimensions of the machine ca.: mPress/punch with injection molding unit200 ton punch upstroke press with injection molding machine (400to)Additional guard locking via 4 power strokesManufacturer: R+S TechnikYear of construction: 2013 / rebuild 2016Mains voltage/frequency: 400V/50Hz 3~(N/PEConnected load: 60KWWeight about 35000kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
200 € adicionar à lista de observados
- Work table 1600 x 1500 mm. - Maximum opening approximately 300 mm. - Main cylinder of Ø150 mm. - Four auxiliary cylinders of Ø80 mm. - Upper hydraulic group with 11 KW motor. - Electrical panel with SIEMENS PLC. - Integrated control panel. - Operating conditions of this item: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-48840-10
pressão: 7 tgarganta: 180 mmcurso: 100 mmárea da superfície da mesa: 300x300 mmsuperfície RAM: furo de 105 mmna mesa: 60 mmaltura da mesa: 1050 mmfuro da ferramenta na ram: 30 mmrequisito de potência total: kWdimensões da máquina ca.: BxTxH 1200x1200x2100 mm
pressure: 20 tdistance between columns: 450 mmstroke: 100 mmtable surface area: 440x320 mmram surface: Ø140 mmhole in the table: Ø50 mmtable height: 900 mmtool hole in ram: Ø40 mmtotal power requirement: 3 kWweight of the machine ca.: 2 tdimensions of the machine ca.: BxTxH 1400x1200x2200 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressão: 25 tdistância entre colunas: 800 mmcurso: 100 mmdayligth: 450 mmárea de superfície da tabela: 750x750 mmpeso da máquina ca.: 3 tdimensões da máquina ca.: 1500x1500x2700 mm
pressão: 100 tgarganta: 275 mmcurso: 150 mmárea da superfície da mesa: 860x550 mmsuperfície RAM: 600x400 mmaltura da mesa: 810 mm furo da ferramenta na RAM: 50 mmdayligth: máx. 475 mmpeso da máquina ca.: 7 tdimensões da máquina ca.: BxTxH 2000x2500x3300 milímetro
pressure: 100 tdistance between columns: 625 mmstroke: 150 mmtable surface area: 580x450 mmram surface: 580x340 mmhole in the table: Ø 150 mmtable height: 850 mmtool hole in ram: Ø 45 mmcolumn travel -side: 200x200 mmweight of the machine ca.: ca. 6,0 tdimensions of the machine ca.: BxTxH ca. 1300x1300x2750 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressão: 250 tdistância entre colunas: 900 mmcurso: 300 mmárea da superfície da tabela: 850x900 mmsuperfície RAM: 800x880 mmcurso: 300 mmaltura da mesa: 1050 mm
pressure: 400 tstroke: 300 mmtable surface area: 1200 x 700 mmram surface: 1200 x 700 mmdayligth: 500 mmadjustment of stroke: 300 mmreturn capacity: 348 kNcapacity of ejector: 100 kNejector stroke: 100 mmtotal power requirement: 65 kWweight of the machine ca.: 28 tdimensions of machine L x W x H: 4,4 x 2,75 x 4,0 m= Frame pressAccessories: tool changing table- next safety inspection according to stamp 05/2021 -- with cutting shock absorption damping force 4000 kN damping stroke 5 mm spindle adjustment 200 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
