máquinas e equipamentos para engenharia de processo usadas para venda (7,610)

Carlier CITP fiberglass reinforced composite (GRP)Chemical Storage tank50 m capacitySuitable for Sodium Hypochlorite 3.6% Auction-ID: A1-48805-185

Carlier CITP fiberglass reinforced composite (GRP)Chemical Storage tank50 m capacitySuitable for Sodium Hypochlorite 3.6% Auction-ID: A1-48805-150

Carlier CITP fiberglass reinforced composite (GRP)Chemical S-storage tank50 m capacitySuitable for Sodium Hypochlorite 3.6% Auction-ID: A1-48805-186

Carlier CITP fiberglass reinforced composite (GRP)Chemical Storage tank50 m capacitySuitable for Sodium Hypochlorite 3.6% Auction-ID: A1-48805-183

Carlier CITP fiberglass reinforced composite (GRP)Chemical Storage tank50 m capacitySuitable for Sodium Hypochlorite 3.6% Auction-ID: A1-48805-167

Carlier CITP fiberglass reinforced composite (GRP)Chemical Storage tank50 m capacitySuitable for Sodium Hypochlorite 3.6% Auction-ID: A1-48805-153

F.I.P.P. fiberglass reinforced composite (GRP) Auction-ID: A1-48805-158

Lacaze Energies tank (2016) Auction-ID: A1-48805-130

Lacaze Energies Tampon Buffer tank (2020)1,500L capacityRated for 7 bar pressure, maximum temperature of +170C Auction-ID: A1-48805-116

Carlier CITP fiberglass reinforced composite (GRP)Chemical Storage tank50 m capacitySuitable for Sodium Hypochlorite 3.6% Auction-ID: A1-48805-192

Carlier CITP fiberglass reinforced composite (GRP)Chemical Storage tank50 m capacitySuitable for Sodium Hypochlorite 3.6% Auction-ID: A1-48805-172

Carlier CITP fiberglass reinforced composite (GRP)Chemical Storage tank50 m capacitySuitable for Sodium Hypochlorite 3.6% Auction-ID: A1-48805-180

Lacaze Energies EG 2000 Litre Reservoir Auction-ID: A1-48805-99

F.I.P.P. fiberglass reinforced composite (GRP) Auction-ID: A1-48805-157

Manufacturer: Rosler Model: Z800 Type of Machine: Centrifuge Control Cabinet Designation: Schaltschrank Year of Manufacture: 2013 Pre-fuse: 180 A Mains Supply: 400 V, 3Ph/N/PE Frequency: 50 Hz Control Voltage: 24 V DC Power Rating : 65 kW Nominal Current : 150 A Main Drive : 18.5 kW / 34.5 A Find more here - .ucymachines/ Contact us at - sales@ucymachines

20126,000 mm

Cleaning system, for ceramic flexo and ceramic flexo sleeves. Plastic media or sodium bicarbonate is sprayed at low pressure onto the the cylinder. This media is then recycled continuously about 8 times, depending granulometry. The machine consists of a cleaning and a cyclone/filtration filtration section. Second-hand machine. Power supply: 230V 50/60Hz 3kW Compressed air: 5 bars Media consumption : 0.5kg/hour Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: Georg Model: 4518-3-07 Year of Manufacture: 2008 Material Processed: Cold-rolled steel strip Tensile Strength: 200 – 600 N/mm² Material Thickness: 0.4 – 4.0 mm Strip Width: 300 – 1650 mm Edge Scrap Width: max. 100 mm per side Strip Speed: 0 – 60 m/min Type of Machine: Edge Scrap Cutter with Trough Conveyor Find more here - .ucymachines/ Contact us at - sales@ucymachines

See pictures for more details year is around 2008

[ GENERAL DATA ] Equipment Type: Non-Cycling Refrigerated Air Dryer Manufacturer: Kaeser Kompressoren (Germany) Series: TAH - TBH - TCH Series [ PERFORMANCE ] Flow Capacity: 2.20 m³/min (approx. 77.7 CFM) Pressure Dew Point: +3 °C (+37.4 °F) Pressure Loss: 0.20 bar Max Inlet Temp: +50 °C (+122 °F) [ MECHANICAL & PRESSURE ] Max Working Pressure:16 to 18 bar (232 to 261 PSI) Air Connection: G 1 (Female Thread) Condensate Outlet: G 1/4 Condensate Drain: ECO-DRAIN (Electronic, Zero Pressure Loss) [ ELECTRICAL & REFRIGERATION ] Power Supply: 230 V / 1 Phase / 50 Hz or 60 Hz Power Consumption: 0.46 kW (at 100% volume) Refrigerant Type: R-134a Cooling Method: Air-Cooled Fan Assembly [ DIMENSIONS & WEIGHT ] Height: 879 mm (34.6 in) Width: 427 mm (16.8 in) Depth: 608 mm (23.9 in) Total Weight: 55 kg (121.2 lbs)

Manufacturer: Hegla Year of manufacture: February 2002 Model: VSG-A 46 MT Type of machine: Cutting system for laminated safety glass (VSG) Running direction: right to left Connected load: 35 kW Dimensions of the system (width x height x length): 13.2 x 6 x 1 meters Maximum glass size (width x height): 4600 x 3210 mm Maximum single glass thickness: 16 mm Condition: Rated 2 out of 6 (good), where 1 is very good and 6 is unsatisfactory Operational status: Operational (yes) Additional equipment: Annual maintenance carried out by Hegla Additional documentation included: Operating manual, wiring diagram, layout drawing Remarks: Stops are worn in line with the age of the machine; mechanical alignment required Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: ARBURG Model: ALLROUNDER 370 C 800-250 Type of machine: Injection molding machine Year of manufacture: January 2005 Weight: 3180 kg Clamping force: 800 kN Operating voltage: 400V, 3-phase, 50Hz Heating: 6.5 kW Pump motor: 1 x 15.00 kW Total connected load: 21.5 kW with Multilift handling for inserts Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: Arburg Year of manufacture: 2008 Model: ALLROUNDER 370 S 600-290 Type of machine: Wax spraying machine Condition: already dismantled, ready for collection Find more here - .ucymachines/ Contact us at - sales@ucymachines

Engel ES 2550/500 HL - V Hours - 114924 Injection unit Screw diameter mm 70 Screw peripheral speed m/s 0.894 Maximum shot volume cm3/g 1193 Injection pressure maximum hydr/spec bar 2140 Nozzle radius mm R35 Maximum barrel temperature °C 350 Clamping unit Clamping force kN 5000 Maximum opening stroke (distance between the platens) mm 1700 Minimum installation height mm 500 Distance between tie bars Horizontal mm not applicable Distance between tie bars Vertical mm not applicable Centering ring Diameter nozzle side mm 200 Centering ring Diameter ejector side mm 200 Ejector Ejector available Yes/No Yes Ejector stroke Maximum mm 250 Core pulls Core pulls AS pcs. 2 Core pulls DS pcs. 1 Air valves Pneum. Valve gate nozzles - 4 Cumsa - No Air valves - 1 Robot-Linear Engel A-axis - No B-axis - Yes C-axis - Yes 5- /6-axis Yes/No No Machine data Year of manufactur ...

This Anthracene and Carbazole Purification Plant is a complete industrial rectification and crystallisation system for the production of purified carbazole and anthracene from crude anthracene.The plant offers high-purity output with a design capacity of 2,600 tonnes per year of carbazole and 3,600 tonnes per year of anthracene, making it a proven solution for buyers of used chemical purification equipment. Manufacturer: NJR Type of Machine: Anthracene and Carbazole Purification Plant Design Capacity: - 2,600 t/a Carbazole - 3,600 t/a Anthracene Output Quality: - Purity of Carbazole: greater than 97.0% - Purity of Anthracene: greater than 95.5% Production Process — Three Steps: - Step 1: Crystallisation - Step 2: Rectification - Step 3: Solidification (Granulation) Process Description: - Crystallisation: Static layer crystallisation, 3-stage process. Cooling plates suspended  ...

Manufacturer: Durst Type: D-SLK 12 Diagonal, AIRSEC Vario 1/2 Year of manufacture: 2008 Heating medium: liquid gas propane, gas blower burner for natural gas E Dimensions - Spray cabin interior: 4000 x 2400 x 2550 mm - Container exterior overall: 6000 x 2500 x 2800 mm - Aggregate room interior: 2400 x 1850 x 2300 mm Air Performance - Fresh air supply: up to 10000 cubic meters per hour, motor rating 2.2 kW - Exhaust air: up to 10000 cubic meters per hour, motor rating 2.2 kW - Air change rate: up to 408 times per hour - Exhaust discharge velocity: approximately 14.1 to 17 m per second Heating - Maximum heating output: 90 kW - Maximum circulating air temperature for drying: up to 75 to 80 degrees C - Average annual natural gas consumption: approximately 3.4 Nm3 per hour - Maximum consumption at 90 kW: approximately 9.5 Nm3 per hour Filtration - Pre-filter: bag filter, filter cla ...

GEA Westfalia CA 755-01-32 decanters, manufactured in 2007, for winemaking Find more here - .ucymachines/ Contact us at - sales@ucymachines

We are offering for sale a complete cable assembly line composed of the following equiptment: - Komax Alpha 433 L Fully Automatic - Komax ADS 123 Wire Storage - Safety Enclosure - Extraction System (AAT 260) - Operating Computer and Control - Various Crimping and Processing Modules - Further Accessories Available Upon Request Condition : Fully Functional Year - in between 2008 - 2012 Find more here - .ucymachines/ Contact us at - sales@ucymachines