Number of sanding units: 2 St.
sanding width: 290 mm
Sanding
height max.: 180 mm
LÖWER-DoubleSander Solid DSM
3000
----------------------------------
Two-sided single wood
sander for sanding
Solid wood such as window wood etc.
Stable
Top version with long casting tables, brushing and
finishing
device and conveyor belt feed. Suitable for
high
Permanent load even with higher chip removals.
-
Staggered sanding and finishing units at the top
and below
-
directly driven rubberized sanding rollers for slip-proof
free
power transmission
- Combined grinding via roller and shoe for
high chip removal
with a flat intervention zone at the same
time
- maintenance and wear-free CERMET-coated grinding
wheels
shoes with very good thermal conductivity and
absolute
Dimensional accuracy
- External cooling of the
grinding zones for cooler grinding
and longer sanding belt service
life
- force-guided pneumatically controlled sanding
belt
oscillation
- effective sanding dust extraction directly
on the
Grinding rollers
- Airborne dust extraction on the
tension rollers
- Integrated brushing and finishing device with
large
Grinding dust extraction
- motorized grinding thickness
adjustment via precision
threaded spindles and large-sized linear
ball screws
bearing sets on hardened and ground
precision
shafts with dust and dirt protection
- Adjustment of
the chip removal at the bottom via precision
Threaded spindle with
dimension display via scale ring
(Resolution 0.1mm)
- Sanding
belt tension via pneumatic cylinder
constant clamping
pressure
- Sanding belt change with pneumatic belt
relaxation
Within seconds
- Adjustment option for the sanding
belt run
Band change
- electro-pneumatic compressed air
monitoring
- Anti-running protection via contact roller if it is
too thick
workpieces
- Workpiece transport via calibrated
non-slip and non-stick
fixed conveyor belts over heavy, 1000mm
long cast iron
tables with a finely planed surface and
spring-loaded
Pressure rollers with fine adjustment
- Cardan
shaft drive for smooth and consistent
Workpiece transport
-
Feed gear motor infinitely variable
for quick adaptation to
different types of wood
- all motors electrically protected
-
Ergonomically arranged controls on the workpiece inlet side
-
digital thickness display (resolution 0.1mm) with modern
Magnetic
tape system
Technical data:
- Sanding belt speed 22 m/s
-
Sanding belt length 1800mm
- Sanding belt width 300mm
-
Working width 290mm
- Grinding thickness 2-180mm
- two brake
motors for 7.5 kW drive
- Feed motor 1.0 kW
- Feed speed 4-20
m/min.
- automatic height adjustment 0.37 kW
- two brush units
of 0.37 kW each
with fiber brushes D 120 x 300mm
- Suction
nozzles 2 x 120mm and 2 x 150mm
- Pneumatic connection 6 bar
-
Working height 850mm
- Length 2105mm
- Length with control
panel 2490mm
- Width 980mm
- Height 1910mm
- Weight
approx. 1650 kg
- Operating voltage 400 volts, 50 Hz, 3P
- CE
version
---------------------------------
Price of the above
machine on request!
---------------------------------
Special
accessories with additional costs:
Workpiece blow-off
-
using nozzles from above and below at the machine outlet
arranged,
pneumatically controlled
Sanding belt blowout
via nozzles
directly on the radii of the tension rollers inside
the suction
arranged, timer controlled on/off 5 seconds each,
can be switched
on separately
Disc unit for defibering
- two grinding
flap discs with 180mm diameter
(max. grinding width 180mm)
-
Adjustable laterally and in delivery
- including frequency
converter for stepless speed control
instead of the standard
brushing and finishing facility
Roller finish package
300
- two grooved roller base bodies equipped with grinding
flaps
- Total diameter approx. 180mm
- including frequency
converter for stepless speed control
instead of the standard
brushing and finishing facility
Lateral displacement of the
entire machine
- adjustable 50-100mm oscillating for more
even
Utilization of sanding belts, finishing tools
and
Transport system, geared motor 0.37kW
(not available in
conjunction with disc/softdisc unit)
Transport freewheel
device
- when linked with little distance to the previous
machine
External start impulse of the machine
- via a
button including control option via external
PLC control (when
linked in a production line)
DUPLO control
- additional
control panel for attachment to a
upstream machine with the
following functions:
- Start button
- Emergency stop
switch
- Height adjustment up, down and 1/10 down
- Digital
strength display
- shielded special cable, (max.
20m)
Suction device for DSM conveyor belts
against tables
for grinding particularly thin workpieces
from 1 mm, including
80mm connection piece for suction hose
Automatic workpiece
thickness scanning
no prior measurement necessary)
Set of
SmartFlex sanding flaps for DSM with flap discs
consisting
of:
60 strips M 35 / 50
Set of SmartFlex sanding flaps
for DSM with flap roller
consisting of:
48 strips M 55 /
300
--------------------------------
Price of the
above-mentioned special accessories on
request!
--------------------------------
(technical
information according to the manufacturer - no guarantee!)
All
prices quoted are net. plus statutory
VAT
The data for this ad was created with
ModulMWS - the software solution of LogoTech oHG.
Alemanha
ab Werk 
