| Integrated motor spindle
speedMASTER® |
Drive power (100% DC) 25 kW |
|
Drive power (40% DC) 35 kW |
|
Torque (100% DC) 86 Nm |
|
Torque (40% DC) 130 Nm |
|
Speed range - 20000 rpm |
|
Spindle taper HSK-A 63 DIN 69893 |
|
Clamping System HSK-A 63 |
| NC swivel rotary table |
Swivel Rotary Table for simultaneous machining
Clamping surface dia. 505 x 500mm / 19.9 x 19.6 in swivel range -35 to
+110°, rotary axis 360° including direct measuring system for B- and
C-axis and working plane transformation |
| Clamping pneumatic, two circuits |
Clamping pneumatics, 2 clamping circuits for
standard machine |
| Tool clamping for HSK-A63 |
Tool clamping HSK-A63 according DIN 69893 (incl.
adaptation working spindle and tool magazine) |
| Tool magazine 60 pockets |
Tool magazine 60 places HSK-A63 Vertical chain
with double gripper incl. set up station for tool loading |
| Chip removal package with cabin roof |
Swarf removal package chip conveyor Coolant -
air-blast changeover Swarf conveyor, scraper type with cleaned slot
screen Spray gun for swarf removal Bed flushing, cabin roof |
| Infrared measuring probe PP60
optical |
Infrared touch Probe make Renishaw PP 60 optical
(OMP 60) |
| Tool laser measuring Renishaw NC4
blue |
Laser tool measuring Renishaw NC4 blue Install on
console beside working table, Tool lenght and diameter measuring
automatically cleaning through external airblast Calibration tool with
taper |
| 3D Quick SET |
3D quickSET Tool kit for control and compensation
of the cinematic accuracy of 5 axis machine configurations (only with
option touch probe) |
| MPC Machine Protection Control |
MPC Machine Protection Control Machine protection
by quick shutdown |
| Signal lamp 4-colour |
Signal lamp, 4 colours |
| Oil- and emulsion mist separator
mechanical |
Oil and emulsion mist separator mechanical filter
system 1100 m³/h (only available with option cabin roof) |
| Internal coolant supply 40bar/600l |
Internal coolant supply (ICS) with paper type
filter, 40 bar/23 l/min / 600-l tank 580 psi/6 gallon/min /160 gallon
incl. rotary joint in spindle, double D4552871 cartridge filter 50µm
for internal coolant Rotating clear-view window (differently from
standard) |
| Air blast through spindle centre |
Air blast through spindle centre activated by M
function, maintained air |
| ATC (Application Tuning Cycle) |
ATC (Application Tuning Cycle) programmable feed
parameter selection for machining task: accuracy/surface/speed |
| Automation Interface Robo2Go |
Automation interface Robo2Go Interface (Profibus)
via M65 Automatic loading door Working table with 4-channel rotary
joint Only in combination with an additional clamping method
option! |
| Laminated safety glass front door |
Laminated safety glass for front door |
| Columncladding workingarea |
Lead sheeting to protect the column in the
workingarea |
| Exhibition design DMU 40 |
Exhibition design DMU 40 Cover plate for heat
exchanger on DMU 40 Plus; DMG-MORI set of labels; paper version of
electrical plan |
| Safety package for power failure (incl.
IPC) |
Safety package for power failure: Package for IPC
CELOS (For proper shutdown of IPC), Overvoltage limiter at power feed,
Undervoltage monitoring with fast deceleration control through
NC-safety control system |
| Messenger V4 |
The latest version of DMG MORI Messenger displays
web based the machine live status. It allows to analyze the machine
run-time, downtime, alarms in individually configurable dashboards
and transparently shows the actual status in the manufacturing
shop |
| Special equipment |
- Energy meter for CELOS - IO / NIO
differentiation - Standard installation elements |