Manufacturer: Priess und Horstmann, Type: BAT-RTW-CNC, Year: 2003, Control: NST Panel PC W2k, Software: Ferro CAN Bus, Online connection: möglich, Machining stations: 4, Work piece width min-max mm: 130 - 600, Work piece length min-max mm: 290 - 1.300, Work piece thickness min-max mm: 16 - 25, 3 axis control: yes, Destacking unit: yes, Robot charging: yes, Beschickungsband: yes, Vertical drilling station from below: 2, Belt bores: yes, Drill and set buffer: yes, Grip holes: yes, Special bore area: yes, Automatic setting up: yes, Fitting station: yes, Transmission station: yes, Hordenwagen Aufstapelstation: yes, Automatic feed of the: yes, Line boring units pcs: 2, Line screw running units: yes, Year :2003
Manufacturer: Priess und Horstmann, Type: BAT III-CNC-2, Year: 1996, Control: Priess und Horstmann, Program: yes, Function: Frontenbohrmaschine, Work piece width min-max mm: 100-600, Min.-max. workpiece length in mm: 100-1000, Min.-max. workpiece height in mm: 16-25, Destacking unit: 2, Einlaufrollengang: 2, Dowel driving station: 80, Milling spindles horizontal: Blum, Milling spindles vertical: yes, Fitting type: 21000, Schliesszylinder Bohrstationen: 2600, Schlosskastenfrässtationen: 60, Bänderbohrstationen: 2, Bänder Eindrehstation: 15, Hinges inserting unit: no, Dowel driving station: 3, Working range X: 2, Dowel driving station: 3, Working range Z: 1, Dowel driving station: 3, Drilling support horizontal: yes, Drill gearings: yes, Number of tables: yes, Year :1996
Manufacturer: Priess und Horstmann Frontenbohrautomat, Type: BAT III, Year: 1994, Control: Priess und Horstmann, Barcode scanner: yes, 3 Achsensteuerung: 3, Working range X: 2 X 1500, Work piece width min-max mm: 190 - 600, Work piece length min-max mm: 100 - 1500, Work piece thickness min-max mm: 10 - 60, Automatic setting up: yes, Drilling supprt from bottom: 7 Spindeln, Drill support from top: yes, Number of milling spindles: 1 , Power kW 2: 2,2, RPM min-max 2: 18000, Sawing unit: 1,6 kW, Line screw running units: yes, Feeding speed max m/min: 60/80/10, Pneumatic clamping: yes, Cycle rate: 400, machine ready for demonstration: yes, FREE TEXT: Maschine ist für Hettich Beschlag/Puffersetzautomat , Year :1994
Manufacturer: Priess und Horstmann, Type: BAT III, Year: 1995, Control: Priess und Horstmann, Program: yes, Funktion: Frontenbohrmaschine, Work piece width min-max mm: 150-600, Min.-max. workpiece length in mm: 150-1300, Min.-max. workpiece height in mm: 10-45, One or two Spot machine: 2, Working stations: 2, Feeding speed max m/min: 80, Fitting type: Blum, Set buffer: yes, Working range X: 21300, Working range Y-axis: 2600, Working range Z: 60, Vertical drills-X: 2, Drill vertical Y: 15, Horizontal drills-X: no, Drill gearings: 3, Drilling supprt from bottom: 2, Drill gearings: 3, Drill support from top: 1, Drill gearings: 3, Hinges inserting unit: yes, Magazin for hinges!: yes, Radial arm machine: yes, Year :1995
제조사: 프리스 운트 호르스트만, 유형: BAT 2, 연도: 약 1990년, 제어: 수작업, 프로그램: 예, 기능: 1 플라츠, 작업 부품 폭 최소 mm: Bänder 보렌 운트 세첸, 최소 최대. 작업물 높이(mm): 2500, 디스토킹 단위: 1000, 피팅 종류: 2, 슐리에실린더 보어슈타넨: 2, 피팅 유형: 2, 도웰 드라이빙 스테이션: 예, 작업 범위 X: 예, 연도 :약 1990
제조사: Priess und Horstmann, 종류: BAT-III-CNC, 연도: 1996, 제어: B&R + PC, 온라인 연결: möglich, 가공 스테이션: 2, 작업물 폭 최소 mm: 190-600, 작업물 길이 최소 최대 mm: 100-1350, 작업물 두께 최소 mm: 16-35, 3 Achsensteuerung: 3, Vertikale Bohrstationen von unten: 2, Bandbohrung: 네, Pufferbohren und setzen: 네, Grifflöcher: 네, Sonderbohrung Fläche: 네, 자동 설정: 네, 아래에서 드릴 자료: 2, 수평 지지대 드릴 1, 전체 드릴 헤드: 3, 베슐라그스테이션: 네, 연도 :1996
제조사: 프리스 운트 호르스트만, 유형: BAT III CNC, 연도: 1994년, 제어: 프리스 운트 호르스트만, 기능: 2, 작업재 폭 최소 최대 mm: 톱프밴드, 최소-최대 길이. 가공물 길이 mm: 네, 최소-최대값입니다. 작업물 높이 mm 단위: 약 2 X 1250, 디스킹 유닛: 2600, 아인라우프롤렌강: 60, 도웰 주행 스테이션: 19, 장착 유형: 2, 슐리에실린더 보어스테이션 1, 피팅 유형: 2, 벤더보어스태넨: 1, 피팅 종류: 2, 경첩 삽입 유닛: 2 X9, 도웰 주행 스테이션: 예, 래스터 테이블: 2 Stück Puffersetzeinheiten, 연도 :1994
작동 길이 : 1.800mm 갖추고: - 각각 3 개의 드릴이있는 2 개의 드릴링 유닛 - 구멍 경첩을위한 프레스 핏 장치 - 힌지 벨트 등을위한 2 개의 드릴링 에
