We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
używany
length: 1980 mmwidth: 670 mmheight over floor: 850 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
używany
Description: • Multi drilling machine, dowel drilling machine • Serial number 207/78/2 • Total installed power 6 KW • Maximum distance between vertical heads approx. 700 mm • Minimum distance between vertical heads approx. 160 mm • 1 x horizontal drilling head with 20 spindles, pitch 32 mm, maximum drilling depth approx. 70 mm • 2 x vertical drilling heads with 15 spindles each, pitch 32 mm, motor 1.47 KW • 2 pneumatic clamps • Accioning by pedal • Dimensions for transport 1550 x 1550 x 1700 mmApprox. Onsite Dimension. (l x w x h): 1,550 x 3,200 x 1,520 mm, weight approx.: 800 kg
używany
Description: Eccentric connector drilling / cup hinge drilling Connector drilling Hole line system / Frame drilling 4 clamps / 4 hold-down devices Technical data: Motor: 1.5 kW Spindle speed: 2800 rpm Max. clearance between the side stops: 750 mm Working height: 850 mm Clamping height max. workpiece thickness: 100 mm max. hole row position dimension: 300 mm Tool shank diameter: 10 mm Weight: approx. 390 kg Space requirement (depth width height): 115x120x125 PRICING IN OVERHAULED CONDITION SOLD WITHOUT WARRANTY! Data is taken from the manufacturer's brochure/documents and may differ from the actual values. ATTENTION: It is expressly pointed out that this lot only corresponds to the scope of the lot description. If objects can be seen in the photo that are not expressly listed in the lot description, these are not part of the sale. part of the sale. This naturally also applies to tools ...
używany
Description: • Multi drilling machine, dowel drilling machine • Drilling head with 27 spindles • Distance between spindles 32 mm • Total distance between first and last spindle 832 mm • Working table dimensions approx. 1070 x 360 mm • Motorized tilting head: 0° - 90° • Motor 1.84 KW-2850 rpm • 3 pneumatic clamps • Actuating by pedalApprox. Onsite Dimension. (l x w x h): 1,250 x 1,000 x 1,300 mm, weight approx.: 500 kg
używany
Description: Gluing System EVA Hotmelt Corner Rounding Unit , Max Panel Width 210 mm Min. panel height 10 mm Max. panel height 30 mm Min. panel length 115 mm Max. panel length 2500 mm Min. panel width 30 mm Max. panel width 210 mm Edge coil magazine , NO. EDGE PROCESSING UNITS 1 Processing Unit : fine trimming to trim and roundApprox. Onsite Dimension. (l x w x h): 1 x 1 x 1 mm, weight approx.: 1 kg
używany
Description: Min. panel length 115 mm Max. panel length 2500 mm Min. panel width 30 mm Max. panel width 210 mmApprox. Onsite Dimension. (l x w x h): 1 x 1 x 1 mm, weight approx.: 1 kg
używany
Description: Min. panel length 110 mm Max. panel length 800 mm Max. panel width 1250 mm No. Top clamps 6 no. bottom vertical units 1 with positioning by NC spindles for vertical boring 1 No. injectors 2 No. storage tank 1 Item inserted wooden dowels Control system KOCH NUMERIC Safety standard CE mark Safety photocellsApprox. Onsite Dimension. (l x w x h): 3,000 x 1,750 x 2,200 mm, weight approx.: 3,000 kg
używany
Description: Min. panel length 150 mm Max. panel length 800 mm Min. panel width 230 mm Max. panel width 3200 mm Max. forward feed speed 70 m/min No. Top clamps 4 no. bottom vertical units 6 , motor power 1.3 KW r.p.m. 7000 RPM No. injectors 6+6 No. storage tank 2 Item inserted , wooden dowels , wooden dowels 8/10 mm TOOLS NOT INCLUDEDApprox. Onsite Dimension. (l x w x h): 1 x 1 x 1 mm, weight approx.: 1 kg
używany
ORF Universal 5 Wrzeciona
używany
Wiertarka do kołków Schleicher Wiertarka uniwersalna Typ BORFIX Z obrotową belką wiertniczą Przekładnia wiertnicza z 9 wiertłami 1,5 kW 2 pneumatyczne uchwyty obrabianych przedmiotów Wiertła od góry i od tyłu Wymiary poduszki 1000 mm x 530 mm Długość szyny oporowej 2000 mm Waga z paletą 185 kg Wymiary transportowe 1200 mm x 1020 mm x wys. 1700 mm
używany
Wiertarka SCM model TOP29: - 29-wrzecionowa głowica z szybkozłączem - Regulowane wiercenie 0-90° od góry w pionie do poziomu - Zmotoryzowany ruch głowicy wiertarskiej - 6-pozycyjny rewolwer głębokości wiercenia - 4 pneumatyczne zaciski do przytrzymywania elementów - w komplecie z aluminiowymi szynami DOSTĘPNOŚĆ OD KWIETNIA 2024 R.
używany
Description: For drilling of glazing bars and frames, door components and sash joints 10 different drilling programmes Drilling head with 2 spindles Drilling stroke: max 80 mm Pneumatic workpiece hold-down device Right and left length stop  ,drilling units horizontal: 1 pieces, packing measure approx (l x w x h): 1,300 x 1,400 x 1,650 mm, Approx. Onsite Dimension. (l x w x h): 6,000 x 1,400 x 1,600 mm, weight approx.: 400 kg
używany
Description: Max. panel width 1300 mm No of Bottom Units 1 No of injectors 1 bottom vertical units horizontal units Max. panel width 1300 mm No. Top clamps 4 spindles for horizontal boring 2  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  , motor power 0.55 KW r.p.m. 2700 RPM Item inserted yes wooden dowels wooden dowels 10X50 Safety standard CE mark  ,  ,  ,  ,  ,  ,  , ,Approx. Onsite Dimension. (l x w x h): 3,250 x 1,900 x 1,800 mm, weight approx.: 1,500 kg
używany
Description: serial number 801325 center distance between each spindle 32 mm minimum and maximum distance between the vertical heads 96-2000 mm minimum lenght of the piece 240 mm max. working width 2500 mm min.working width between the vertical units 96 mm boring capacity maximum 27 cycles/min the drilling depth is adjustable 0-70 mm conveying speed 57 m/min spindle rotations per minute 2800 g/min engine capacity 2,5 (horizontal) 1,5 plus 1,5 (vertical) HP pressure 5-8 atm air consumption with 6 boring units 50 liter / cyle air consumption per head 7 liter / cyle feeding nominal tension 400 V, 50 Hz nominal current 30,8 A maximum overload current 0,104 kA Approx. Onsite Dimension. (l x w x h): 3,710 x 1,800 x 1,500 mm, weight approx.: 1,540 kg, Serial Number of Manufacturer: 801,325