Number of spindles: 5 St.
Working width: 230 mm
Working
height: 120 mm
Length of the planing table: 2500 mm
Feed
motor: 4 kW
Feed speed: 5-30 m/min.
control: Memory-Funktion
Weinig Powermat 500 with grooved
table
----------------------------------
The machine arrives
at the warehouse and is cleaned and fully inspected.
Brief
Summary:
----------------------------------
- 5 Spindles
-
8,000 rpm
- Grooved table for short or difficult-to-guide
workpieces, coated
with Marathon PowerCoating
- One driven
roller in the outfeed table, hardened: 210 mm wide
- Left and top
spindles controlled for width and height
- Quick-release spindle
nut
Detailed
Description:
-----------------------------------------------------
------------------
Technical Data:
Working width: 20-230
mm
Working height: 8-120 mm
Number of spindles:
5
1st Spindle -
bottom
-----------------------------------------------
Motor
with brake: 7.5 kW
Spindle diameter: 40 mm
Speed: 8,000
rpm
Tool circle: 125-180 mm
Tool circle for rebate cutter:
130-160 mm
Travel Axial: 17 mm
Folding
attachment
MarathonCoatin for table insert in front of 1st lower
tool holder
2nd Spindle -
right
-----------------------------------------------
Mot
or with brake: 5.5 kW
Spindle diameter: 40 mm
Speed: 8,000
rpm
Tool swing diameter: 93 - 200 mm
Max. groove depth: 35
mm
Axially travel: 80 mm
Radial travel:
Min. tool
diameter at stop level: 93 mm
Max. tool diameter behind stop
level: 200 mm
3rd Spindle -
left
-----------------------------------------------
Motor
with brake: 7.5 kW
Spindle diameter: 40 mm
Speed: 8,000
rpm
Tool swing diameter: 93 - 200 mm
Tool swing diameter for
straight cutter heads: max. 163 mm
Max. Groove depth: 35
mm
Axially travel: 55 mm
Pressure shoe in front of left
spindle, including 2 lateral
pressure rollers,
spring-loaded
Spindle radially CNC-controlled
4th Spindle
- top
-----------------------------------------------
Motor
with brake: 11.0 kW
Spindle diameter: 40 mm
Speed: 8,000
rpm
Tool swing diameter: 93 - 200 mm
Maximum tool swing
diameter for straight cutter heads: 180 mm
Maximum groove depth:
35 mm
Axially travel: 40 mm
Spindle radially
CNC-controlled
Split pressure shoe in front of upper tool
holder, adjustable to the
tool swing diameter and pivoting away
from the tool, spring-loaded.
5. Spindle -
Lower
-----------------------------------------------
Motor
with brake: 5.5 kW
Spindle diameter: 40 mm
Speed: 8,000
rpm
Tool swing diameter: 93 - 225 mm
Max. throat depth: 15
mm
Axially travel: 35 mm
Radial travel:
Min. tool diameter
to table level: 93 mm
Max. tool diameter 6 mm below table level:
225 mm
Feed
system
-----------------------------------------------
Frequen
cy-controlled feed, infinitely variable with brake: 4 kW, 5 - 30
m/min
Infeed roller in front of the first lower tool,
pneumatically controlled up/down.
Durofer pointed tooth
rollers with depth limiter and self-cleaning.
Feed roller
adjustment travel relative to the left tool holder, axial 35
mm
Reduced roller spacing relative to the right
tool
Machine electrical
system
-----------------------------------------------
Operati
ng voltage 400 V (voltage range 380 - 420 V), 50 Hz.
Machine
stand, tables, and
stops
-----------------------------------------------
Infeed
table: 2500 mm long (including jointing guide)
Slotted guide for
short or difficult-to-guide workpieces, coated
with Marathon
PowerCoating. Table tops are not removable. Includes
Insert
rail for transporting narrow workpieces on the slotted
guide.
(Minimum working width 25 mm, maximum chip removal on
the first lower spindle 7 mm)
Manual lubricant pump for
removing resin from the groove guide, including lubricant
One
driven, hardened roller in the outfeed table: 210 mm
wide
Pressure elements and
guides
-----------------------------------------------
Spring-
loaded pressure rollers from above
Machine
operation
-----------------------------------------------
Cont
rol: Memory function
For saving the setting values of
profiles.
Tool holder axes with electronic digital
displays.
Function:
Saving the setting values of the
machined profile at the touch of a button
under a profile
number.
When the profile number is selected again, the
electronic dual displays show
the setting values.
By
manually adjusting the tool holders, the displays are brought
into
conformity. 99 memory locations.
Basic equipment for
installing CNC-controlled adjustment and positioning
2 x
radial CNC-controlled adjustment and positioning of the tool
holders
in conjunction with the memory function for tool holders
3, 4
CNC-controlled adjustment and positioning of the feed
(up/down) in
conjunction with the memory
function
Central position of lubrication points on the front
of the machine.
Safety and noise
reduction
-----------------------------------------------
Full
safety enclosure
Includes existing tools
(Technical
specifications according to the manufacturer - without
guarantee!)
The data for this ad was created
with ModulMWS - the software solution of LogoTech oHG.
