control: Siemens 840-D tool taper: HSK & VDI 40 - - -: - - - - - - Vertical Turning Machine | EMAG - VTC 250 DUO ED with ITC (7-30 bar) and driven tools Additional equipment: - Workpiece grippers on all 3 turrets, - 6-station end-processing turret with HSK tool holder, - 12-station disc turret for driven tools and VDI 40 tool holder, - 12-position disc revolver with cross slot and VDI 40 tool holder, - NC - clamping head, - NC bezel, self-centering, - EMAG hydraulic double-piston clamping cylinder, - tailstock down, - Hydraulic double-piston clamping cylinder at the top, - chip conveyor, - Knoll plant 1.500 l, - Coolant supply 7-30 bar, - OP20: shaft chuck with retractable jaws and face dri ...

control: Siemens 840-D tool taper: HSK & VDI 40 - - -: - - - - - - Vertical Turning Machine EMAG - VTC 250 DUO DD with ITC (7-30 bar) and driven tools Additional equipment: - Workpiece grippers on all 3 turrets - 12-position disc turret for driven tools and VDI 40 tool holders, - 12-station disc turret with cross-slot and VDI 40 tool holders, - 12-station disc turret for driven tools and VDI 40 tool holders, - NC steady rest, self-centering, - headstock below, - tailstock below, - chip conveyor - Knoll unit 1.500 l, - OP10: Three-jaw chuck Rhöm KFD-N 220/3, - OP20: Hainbuch Spanntop pull-back BZI65, - Live tool for axial and radial machining, - Tool holder with Capto 5 quick change system, ...

swing diameter:200 mm weight of the machine ca.:15 t Distance between tips:832,5 mm turning length:380 mm with chip conveyor and belt filter press, infeed and outfeed belt 2 x 12-position revolvers  ...

• więcej informacji

This EMAG VSC 250 Duo Lathe was manufactured in the year 2002. It is equipped with a SIEMENS control unit. The machine has a spindle speed of 6000 rpm. ...

• więcej informacji

turning diameter: 250 mm turning length: 100 mm control: SIEMENS 840 D total power requirement: 35 kW weight of the machine ca.: 7500 kg dimensions of the machine ca.: m E M A G (Germany) Vertical CNC Controlled Hard Turning and Grinding machine with tool turret and workpiece handling System Model VSC 250 DS Year 2004 # M7 28.69324 _______________________________________________________ Turning Ø, max. 250 mm Turning length internal / external 100 mm Workpiece length min./max. 29 – 100 mm 6-positon tool turret Ø / swing-Ø 480/790 mm Workpiece spindle Slide travel, X / Z / stroke 680 / 400 / 200 mm Feed rate /  ...

turning diameter:200 mm swing diameter:260 mm turning height:60 mm  ...

• więcej informacji

X-travel: 680mm, z-travel: 200mm, max. chuck diameter: 250mm, max. swing: 260mm, connected load: 55kW, weight: 8t. ...

• więcej informacji

Rok budowy: 2011 Sterowanie Siemens 840 Dsl Średnica obrotu. [mm] 250 Wrzeciono: Technologia wrzecion silnika Prędkość 6 000 obr./min Moc (Max) 39 kW Moment obrotowy (Max) 460 Nm Siłowniki zaciskowe Pełne siłowniki zaciskowe Uchwyt mocujący przedmiot obrabiany 3-szczękowy, automatyczny blok SMW, KNCS-NB-260-72 Nośnik narzędzi I: Wieża technologiczna z 12 stacjami Uchwyt narzędziowy VDI 40 Napęd narzędzia 6 000 obr./min, 7,5 kW, 24 Nm Nośnik narzędzi II: Technologia:Stacja wiertnicza z zasilaniem IK Uchwyt narzędziowy Capto C8 Ogólne: Przejazd w X/Z 1,180/525 mm Szybki przesuw w X/Z 60/30 m/min Wyposażenie/akcesoria: Układ pomiaru przemieszc ...

Numer inw. : 5794 Typ: VSC 250 DS Producent: Emag Utworzono: 2007 Parametry: Układ sterowania: Siemens Maksymalna średnica toczenia: 250 mm Maksymalna długość toczenia: 100 mm Oś X: 680 mm Oś Z: 200 mm Prąd znamionowy: 35 kW Waga: 7500 kg  ...

• więcej informacji

Article: Vertical turning and grinding centre Manufacturer: EMAG Type: VSC 250 DS Yob: 2008 Control: SIEMENS 840D Grinding spindle speed: 30,000 rpm Rotation spindle speed: 3,000 rpm Tool places turret: 12 Cooler for spindle and machine bed cooling Cooling lubricant - lifting station (no independent cooling lubricant supply) Chip conveyor Parts handling Air through the spindle Two clamping circuits through the spindle (air and oil) Unfortunately, the grinding spindle is defective. However, this can be overhauled in a spindle factory. Otherwise the machine is in a very good condition and fully functional. Please, contact us for getting more information and pictures on mail(at)tar-mc.com or w ...