maszyny do obróbki metalu / frezarki / Frezarki konsolowe poziome
Producent: DMG MORI
Model:NHX 6300
Typ maszyny: Horizontal Console Milling Machines
Numer pozycji: 170358328
Ilość: 1
Data: 22.10.2026
Cena:
Seller-item-No.:064149
| General | |
| Horizontal machining center Chip conveyor (ejection to the rear) Coolant gun for setup station side Oil skimmer Sludge collecting function inside coolant tank In-machine measuring system (spindle) touch sensor (Renishaw OMP60) + workpiece setter Tool breakage detection system Manual pulse generator (separate type) Full closed loop control (Scale feedback); Control: Control F31iB with CELOS | |
| Characteristics | |
| Speed max. | -12000 rpm |
| Drive power (100% DC) | 30 kW |
| Table size | 630 x 630 mm |
| Swivelling range | 360 x 1 degree |
| Maximum load (table centre) | 1500 Kg |
| Max. work piece diameter | 1050 mm |
| Max. work piece height | 1300 mm |
| Palett changer with | 2 Pallet |
| Movement X / Y / Z | 1050/900/1030 mm |
| Rapid feed X / Y / Z | 60/60/60 m/min |
| Tool Magazine with | 60 Positions |
| Spindle taper | BT 50 |
| Weight approx. | 18750 Kg |
| CELOS - ERGOline Touch | CELOS - ERGOline Touch to facilitate machine operation incl. 21.5 " ERGOline Touch ® control with multi touch screens Uniform management, documentation and visualization of order, process - and machine data Networkable with CAD / CAM User friendly and p |
| Spindle Taper 7/24 Taper #50 (two-face contact)/ Grip MAS <BT50 two-face contact> | Spindle Taper 7/24 Taper #50 (Two-face Contact)/Grip MAS <BT50 Two-face Contact> This specification uses the spindle No. 50 7/24 taper (two-face contact) / Grip MAS tool holder. The grip type and retention knob type of ATC are specified separately. |
| Preparation for Center Through-spindle coolant system | Center Through-Spindle Coolant System It can supply coolant through the holes of the spindle and tool. The coolant supply path to the tool tip is a center-through type. Effective for removing chips, cooling a machining point and prolonging a tool life. |
| Retention Knob: DMG MORI 90 degrees (7/24 Taper #50) | Retention Knob: DMG MORI-specific 90-degree (7/24 Taper #50) The spindle collet applicable to the DMG MORI-specific 90-degree retention knob is installed. Tool retention knob is not included. The through-spindle coolant specification requires a dedic |
| Full 4th axis rotary table (STD) | Full Rotary B-Axis Specifications (Standard Specification) Minimum pallet indexing angle is 0.001 °. It is applicable to the B-axis index machining and simultaneous 4-axis machining. The High torque DD (direct drive) motor enables high-speed and high-p |
| Pressure setting for Hydraulic Fixture Interface: 7MPa (STD) | Pressure Setting for Auto-Coupler Specification: 7 MPa (1,015 psi) The hydraulic pressure setting for fixture is 7 MPa (1,015 psi). When changing the pressure setting, please order it as a special specification. |
| Tool storage capacity 60 tools (STD) | Tool Storage Capacity 60 Tools (Standard) |
| Chip conveyor outside machine (rear discharge, drum filter type) (STD) | External Chip Conveyor (Rear Discharge, Drum Filter Type) (Standard Specification) The scraper type chip conveyor efficiently discharges chips in the machine into the container (order separately) at the rear of the machine. The drum filter rotates durin |
| Interface for Through-spindle coolant system (7.0 MPa, Variable Pressure Steps) (KNOLL) | Through-Spindle Coolant System I/F (8 Steps Pressure) (Separate Type) I/F for mounting the high-pressure coolant system (separate type). Supplies the high-pressure coolant to the tool tip from the center of the spindle through the retention knob and the |
| Voltage of Customer Factory 380 V | Voltage of Customer Factory 380 V This machine is shipped with voltage set to 220 V specification. Please arrange transformer if necessary. (Caution) IF the setting is incompatible, there is a possibility of trouble such as operation abnormality and ala |
| Frequency 50 Hz | Frequency 50 Hz This machine is shipped with frequency set to 50 Hz specification. (Caution) IF the setting is incompatible, there is a possibility of trouble such as operation abnormality and alarm occurrence. Be sure to check the supply voltage and fr |
| Setting Unit mm | Setting Unit, MM The unit to be used for the screen display and program commands is set to "millimeter (mm)". Turning: "MM" specification for the turret Horizontal machining center: "MM" specification for the tapped pallet |
| Special equipment | J-008442 powerMASTER – Max. spindle speed 12,000 rpm, 55/30 kW |
| Special equipment | J-007791 Milling of pockets and islands J-008445 High-speed fixed cycles |
| Special equipment | RMS-Sensor |
