maszyny do obróbki metalu / frezarki / Frezarki okrągłego stołu
Producent: DMG MORI
Model:DMU 50
Typ maszyny: Round table milling machines
Numer pozycji: 170358324
Ilość: 1
Data: 22.10.2026
Cena:
Seller-item-No.:011247
| General | |
| Universal Milling Machine; Control: CELOS X with Siemens SINUMERIK ONE | |
| Working area 1 | |
| Longitudinal | 650 mm |
| Cross | 520 mm |
| Vertical | 475 mm |
| Technical Data | |
| Type of main drive | AC |
| Drive power (100% DC) | 25 kW |
| Drive power (40% DC) | 35 kW |
| Speed range | 20-20000 rpm |
| Spindle taper | HSK-A 63 |
| Clamping System | HSK-A 63 |
| Feed rate longitudinal/transverse/vertical | -42000/-42000/-42000 mm/min |
| Rapid traverse longitudinal/transverse/vertical | 42/42/42 m/min |
| Floor space/Weight | |
| Dimensions (L x W x H) | 2,85 x 2,35 x 2,75 m |
| Weight approx. | 7500 Kg |
| Direct measuring system | Direct path measuring system |
| Benefit Package | Benefit Package consisting of: Swarf conveyor, with cleaned slot screen Internal coolant supply 40bar/600l Air blast through spindle centre Application Tuning Cycle 3D quickSET (pre selection, measuring probe) |
| Spindle speed 20.000 rpm | Motor spindle speedMASTER® HSK-A63 Spindle speed 20 - 20,000 min-1 Output 35 kW / 25 kW (47 hp / 33 hp) Torque 130 Nm / 86 Nm (96 ft lbs / 63 ft lbs) (40 / 100 % duty cycle) |
| NC swivel rotary table | Swivel Rotary Table for simultaneous machining Clamping surface dia. 630 x 500mm / 24.8 x 19.6 in swivel range -35 to +110°, rotary axis 360° including direct measuring system for B- and C-axis and working plane transformation |
| Clamping pneumatic, two circuits up to 8,5 bar | Clamping pneumatics, 2 clamping circuits up to 8,5 bar |
| Version Rotary joint, 4 channels, outside of table | Rotary joint connections on the face side for pneumatics or hydraulics in rotary table with swivel axis, 4 channels version Media connection on the face side of the table |
| Tool magazine 60 pockets | Tool magazine 60 places HSK-A63 Vertical chain with double gripper incl. set up station for tool loading |
| Swarf conveyor, with cleaned slot screen | Swarf conveyor, scraper type with cleaned slot screen |
| Internal coolant supply 40bar/600l | Internal coolant supply (ICS) with paper type filter, 40 bar/23 l/min / 600-l tank 580 psi/6 gallon/min /160 gallon incl. cabin roof, rotary joint in spindle, double cartridge filter 50µm for internal coolant (differently from standard) |
| Coolant-air blast change-over | Coolant - Air-blast changeover external switchable via M-Function |
| Air blast through spindle centre | Air blast through spindle centre activated by M function, maintained air with low oil rate |
| Chip flushing for working area | Chip flushing for working area rinsing line on the right side panel, backside of machine bed, cabin left and right activated or deactivate by M function's (only in combination with internal coolant supply, not with 20 bar ICS) |
| Double cartridge filter, 25 µm | Double cartridge filter, Finesse of filtration 25 µm, manually reversible (only in connection with separate paper-type filter) |
| Rotating clear-view window | Rotating clear-view window (only available with option cabin roof) |
| Renishaw Blue Power Probe Kit | Renishaw Blue Power Probe Kit Infrared measuring probe PP 60 optical Laser tool measuring Renishaw NC4 blue Install on console beside working table, Tool lenght and diameter measuring automatically cleaning through external airblast Calibration tool with |
| 3D Quick SET | 3D quickSET Tool kit for control and compensation of the cinematic accuracy of 5 axis machine configurations (only with option touch probe) |
| MPC - Machine Protection Control | MPC - Machine Protection Control Machine protection by quick shutdown |
| Signal lamp 4-colour | Signal lamp, 4 colours |
| Automation Interface WH CELL / Robo2Go | Automation interface WH CELL / Robo2Go Interface (Profinet) via M65 Data width 64 Byte; Automatic loading door Working table with 4-channel rotary joint Only in combination with an additional clamping method option! For Robo2Go this option is only availab |
| zeroFOG oil mist separator | zeroFOG emulsion mist separator Frequency-controlled and self-cleaning emulsion mist separator system |
| Advanced Energy Monitoring | Advanced Energy Monitoring Consumption display of electrical energy and compressed air |
| Exhibition design DMU50 3rd generation | Exhibition design DMU 50 3rd chiller of electrical cabinet painted in electrical cabinet color; lighting of tool magazine; DMG-MORI set of labels; paper version of electrical plan |
| Safety package for power failure | Safety package for power failure: Package for IPC CELOS (For proper shutdown of IPC), Overvoltage limiter at power feed |
| Operation mode 4 | Operation mode 4 "Process monitoring in the production" Manual intervention with open doors of machining area. Release after check list has been filled in. |
| ATC (Application Tuning Cycle) | ATC (Application Tuning Cycle) programmable feed parameter selection for machining task: accuracy/surface/speed |
| Package for tropical climate for speedMASTER® | Package for tropical climate for speedMASTER® for ambient temperature max. 50°Celsius: includes active cooling for electrical cabinet, active cooling main spindle drive / motor spindle |
| Messenger V4 | The latest version of DMG MORI Messenger displays web based the machine live status. It allows to analyze the machine run-time, downtime, alarms in individually configurable dashboards and transparently shows the actual status in the manufacturing shop |
