AMBOLD używana maszyna na sprzedaż

Typ maszyny: Prasa mimośrodowa Producent: AMBOLD Nr kat.: EVSP 35 Rok budowy: 1970 Stan techniczny: bardzo dobry Rodzaj oferty: Maszyna używana Specyfikacje: Siła ściskająca: 35 t Zasięg: 225 mm Skok: Regulacja skoku 5 – 80 mm Stół: 580 x 440 mm Wysokość montażowa: 385 mm Napęd: 3,0 kW Uwaga: z kontrolą tarczy ochronnej, zrób czarny, regulacja suwaka 50 mm, 130 uderzeń suwaka na minutę, dodatkowa płyta wykrawająca 565 x 440 x 70 mm, pneumatycznie regulowany stół wykrawający, Zwalnianie oburęczne i nożne, 4 nóżki maszyny Waga: 2500 kg Maszyna jest w bardzo dobrym stanie i gotowa do natychmiastowego użycia i może być przez nas obejrzana i zademonstrowana. Będzie nam miło, jeśli zainteresują Cię Państwo naszą ofertą. Z wyjątkiem błędów, modyfikacji i wcześniejszej sprzedaży.

Stroke: 45mm, weight: 3.5t.

pressure: 55 t throat: 250 mm stroke: 10-90 mm table-size: 640 x 495 mm no. of strokes: 120 Hub/min ram adjustment: 55 mm ram surface: 195 x 210 mm ram hole: 40 H7 mm hole in the table: 250 x 190 mm T-slots: 22 clamping plate: 620 x 485 x 65 mm total power requirement: 4,5 kW weight of the machine ca.: 3,4 t dimensions of the machine ca.: 1,5 x 1,2 x 2,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 t throat: 350 mm stroke: 20 - 120 mm table size: 1100 x 700 mm ram head dimension: 750 x 450 mm ram adjustment: max. 90 mm no. of strokes: 70 Hub/min strokes - infinitely variable: 20 - 120 Hub/min daylight, max. stroke above - ram adjustment above: 500 mm hole in the table: 400 x 300 mm hole in bolster plate: 220 x 180 mm Breakthrough in column back: 450 x 300 mm total power requirement: 11 kW weight of the machine ca.: 11,8 t dimensions of the machine ca.: 2,1 x 1,3 x 2,8 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 200 t throat: - mm stroke: 250 mm Table dimensions: 2420 x 840 mm ram surface: 1850 x 650 mm dayligth: 500 mm ram adjustment: 110 mm distance between columns: 1900 mm table height: 170 mm no. of strokes: 25 - 45 Hub/min total power requirement: 22 kW dimensions of the machine ca.: 2550 x 2370 x 3820 mm weight: 30 t - pneumatic clutch - press safety valve, Herion - cam switch, Balluff - chain break monitoring - hydr. overload, Hydac - motor. alide adjustment with digital display - separate control cabinet with safety control ABB - separate two-hand control panel with foot switch - slidable side protective doors - front protection by light barriers vertical + horizontal The machine shown and described above is safe for hand inlays. The machine is also in anorther variant or also can be used as an automatic feeder. Equipment possible according to customer agreement. The data for ...

pressure: 40 t throat: 225 mm stroke: 8-84 mm Table dimensions: 580 x 450 mm ram adjustment: 55 mm no. of strokes: 130 Hub/min ram surface: 185 x 180 mm ram hole: 40 H7 mm hole in the table: 210 x 170 mm T-slots: 22 clamping plate: 570 x 450 x 65 mm total power requirement: 3,5 kW weight of the machine ca.: 2,7 t dimensions of the machine ca.: 1,4 x 1,1 x 2,1 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 40 t throat: 225 mm stroke: 8 - 84 mm table surface area: 580 x 450 mm ram adjustment: 55 mm no. of strokes: 130 Hub/min ram surface: 185 x 180 mm ram hole: 40 mm hole in the table: 210 x 450 mm clamping plate: 570 x 450 mm total power requirement: 3,5 kW weight of the machine ca.: 2,7 t dimensions of the machine ca.: 1,4 x 1,1 x 2,1 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 25 t throat: 200 mm stroke: 4 - 80 mm table-size: 520 x 400 mm no. of strokes: 160 Hub/min work capacity during endurance run: 1370 Nm force: 2740 Einzelhub adjustment of stroke: 4 - 80 mm ram adjustment: 40 mm ram surface: 160 x 160 mm hole in the table: 200 x 150 mm clamping plate: 500 x 380 x 60 mm hole in the table: 80 mm weight of the machine ca.: 1,9 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 40 t throat: 225 mm stroke: 8-84 mm Table dimensions: 580 x 450 mm ram adjustment: 55 mm no. of strokes: 130 Hub/min ram surface: 185 x 180 mm ram hole: 40 H7 mm hole in the table: 210 x 170 mm T-slots: 22 clamping plate: 570 x 450 x 65 mm total power requirement: 3,5 kW weight of the machine ca.: 2,7 t dimensions of the machine ca.: 1,4 x 1,1 x 2,1 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 25 t throat: 200 mm stroke: 4 - 80 mm table surface area: 520 x 400 mm no. of strokes: 160 Hub/min force: Dauerlauf 1765 J dayligth: 302 max mm dayligth: 100 min mm adjustment of stroke: 8-84 mm ram adjustment: 55 mm ram surface: 185 x 180 mm ram hole: 40 H7 mm force: 3530 J hole in the table: 210 x 170 mm width of T-slots: 22 mm connected load: 3,5 kW rated current: 9 frequency: 50 Hz voltage: 380 V weight of the machine ca.: 2700 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 55 t throat: 250 mm stroke: 10-90 mm table-size: 640 x 495 mm no. of strokes: 120 Hub/min ram adjustment: 55 mm ram surface: 290 x 210 mm ram hole: 40 H7 mm hole in the table: 220 x 190 mm T-slots: 22 clamping plate: 620 x 485 x 65 mm total power requirement: 4,5 kW weight of the machine ca.: 3,4 t dimensions of the machine ca.: 1,5 x 1,2 x 2,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 25 t throat: 200 mm stroke: 4 - 80 mm table surface area: 520 x 400 mm no. of strokes: 160 Hub/min ram surface: 160 x 160 mm ram adjustment: 40 mm ram hole: 32 H7 mm hole in the table: 200 x 150 mm clamping plate: 500 x 380 x 60 mm total power requirement: 2,7 kW weight of the machine ca.: 1,9 t dimensions of the machine ca.: 1,3 x 1,0 x 1,85 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 55 t throat: 250 mm stroke: 10-90 mm table-size: 640 x 495 mm no. of strokes: 120 Hub/min ram adjustment: 55 mm ram surface: 290 x 210 mm ram hole: 40 H7 mm hole in the table: 220 x 190 mm T-slots: 22 clamping plate: 620 x 485 x 65 mm total power requirement: 4,5 kW weight of the machine ca.: 3,4 t dimensions of the machine ca.: 1,5 x 1,2 x 2,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.